[PATCH -next v2 3/6] ipmi: bt: add clock control logic
jae.hyun.yoo at intel.com
jae.hyun.yoo at intel.com
Wed Nov 3 07:37:14 AEDT 2021
From: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
If LPC BT driver is registered ahead of lpc-ctrl module, LPC BT
hardware block will be enabled without heart beating of LCLK until
lpc-ctrl enables the LCLK. This issue causes improper handling on
host interrupts when the host sends interrupts in that time frame.
Then kernel eventually forcibly disables the interrupt with
dumping stack and printing a 'nobody cared this irq' message out.
To prevent this issue, all LPC sub drivers should enable LCLK
individually so this patch adds clock control logic into the LPC
BT driver.
Fixes: 54f9c4d0778b ("ipmi: add an Aspeed BT IPMI BMC driver")
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
Reviewed-by: Joel Stanley <joel at jms.id.au>
Reviewed-by: Cédric Le Goater <clg at kaod.org>
---
v1 -> v2:
- No change.
drivers/char/ipmi/bt-bmc.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/drivers/char/ipmi/bt-bmc.c b/drivers/char/ipmi/bt-bmc.c
index 7450904e330a..a20f92cc7b18 100644
--- a/drivers/char/ipmi/bt-bmc.c
+++ b/drivers/char/ipmi/bt-bmc.c
@@ -5,6 +5,7 @@
#include <linux/atomic.h>
#include <linux/bt-bmc.h>
+#include <linux/clk.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -62,6 +63,7 @@ struct bt_bmc {
wait_queue_head_t queue;
struct timer_list poll_timer;
struct mutex mutex;
+ struct clk *clk;
};
static atomic_t open_count = ATOMIC_INIT(0);
@@ -423,6 +425,19 @@ static int bt_bmc_probe(struct platform_device *pdev)
if (IS_ERR(bt_bmc->base))
return PTR_ERR(bt_bmc->base);
+ bt_bmc->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(bt_bmc->clk)) {
+ rc = PTR_ERR(bt_bmc->clk);
+ if (rc != -EPROBE_DEFER)
+ dev_err(dev, "Unable to get clock\n");
+ return rc;
+ }
+ rc = clk_prepare_enable(bt_bmc->clk);
+ if (rc) {
+ dev_err(dev, "Unable to enable clock\n");
+ return rc;
+ }
+
mutex_init(&bt_bmc->mutex);
init_waitqueue_head(&bt_bmc->queue);
@@ -433,7 +448,7 @@ static int bt_bmc_probe(struct platform_device *pdev)
rc = misc_register(&bt_bmc->miscdev);
if (rc) {
dev_err(dev, "Unable to register misc device\n");
- return rc;
+ goto err;
}
bt_bmc_config_irq(bt_bmc, pdev);
@@ -457,6 +472,11 @@ static int bt_bmc_probe(struct platform_device *pdev)
clr_b_busy(bt_bmc);
return 0;
+
+err:
+ clk_disable_unprepare(bt_bmc->clk);
+
+ return rc;
}
static int bt_bmc_remove(struct platform_device *pdev)
@@ -466,6 +486,8 @@ static int bt_bmc_remove(struct platform_device *pdev)
misc_deregister(&bt_bmc->miscdev);
if (bt_bmc->irq < 0)
del_timer_sync(&bt_bmc->poll_timer);
+ clk_disable_unprepare(bt_bmc->clk);
+
return 0;
}
--
2.25.1
More information about the Linux-aspeed
mailing list