[PATCH 04/22] ARM: dts: aspeed: rainier: Add additional processor CFAMs
Eddie James
eajames at linux.ibm.com
Tue Mar 30 02:00:02 AEDT 2021
Rainier has two dual-chip modules and therefore four CFAMs with their
associated engines. Add these to the devicetree with the i2c busses
that have devices on them.
Signed-off-by: Eddie James <eajames at linux.ibm.com>
Signed-off-by: Joel Stanley <joel at jms.id.au>
---
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 283 ++++++++++++++++++-
1 file changed, 281 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 757b45e2eddc..aaedd817e1cb 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -12,6 +12,39 @@ / {
compatible = "ibm,rainier-bmc", "aspeed,ast2600";
aliases {
+ i2c100 = &cfam0_i2c0;
+ i2c101 = &cfam0_i2c1;
+ i2c110 = &cfam0_i2c10;
+ i2c111 = &cfam0_i2c11;
+ i2c112 = &cfam0_i2c12;
+ i2c113 = &cfam0_i2c13;
+ i2c114 = &cfam0_i2c14;
+ i2c115 = &cfam0_i2c15;
+ i2c202 = &cfam1_i2c2;
+ i2c203 = &cfam1_i2c3;
+ i2c210 = &cfam1_i2c10;
+ i2c211 = &cfam1_i2c11;
+ i2c214 = &cfam1_i2c14;
+ i2c215 = &cfam1_i2c15;
+ i2c216 = &cfam1_i2c16;
+ i2c217 = &cfam1_i2c17;
+ i2c300 = &cfam2_i2c0;
+ i2c301 = &cfam2_i2c1;
+ i2c310 = &cfam2_i2c10;
+ i2c311 = &cfam2_i2c11;
+ i2c312 = &cfam2_i2c12;
+ i2c313 = &cfam2_i2c13;
+ i2c314 = &cfam2_i2c14;
+ i2c315 = &cfam2_i2c15;
+ i2c402 = &cfam3_i2c2;
+ i2c403 = &cfam3_i2c3;
+ i2c410 = &cfam3_i2c10;
+ i2c411 = &cfam3_i2c11;
+ i2c414 = &cfam3_i2c14;
+ i2c415 = &cfam3_i2c15;
+ i2c416 = &cfam3_i2c16;
+ i2c417 = &cfam3_i2c17;
+
serial4 = &uart5;
i2c16 = &i2c2mux0;
i2c17 = &i2c2mux1;
@@ -30,6 +63,10 @@ aliases {
spi31 = &cfam2_spi1;
spi32 = &cfam2_spi2;
spi33 = &cfam2_spi3;
+ spi40 = &cfam3_spi0;
+ spi41 = &cfam3_spi1;
+ spi42 = &cfam3_spi2;
+ spi43 = &cfam3_spi3;
};
chosen {
@@ -321,6 +358,38 @@ i2c at 1800 {
reg = <0x1800 0x400>;
#address-cells = <1>;
#size-cells = <0>;
+
+ cfam0_i2c0: i2c-bus at 0 {
+ reg = <0>; /* OMI01 */
+ };
+
+ cfam0_i2c1: i2c-bus at 1 {
+ reg = <1>; /* OMI23 */
+ };
+
+ cfam0_i2c10: i2c-bus at a {
+ reg = <10>; /* OP3A */
+ };
+
+ cfam0_i2c11: i2c-bus at b {
+ reg = <11>; /* OP3B */
+ };
+
+ cfam0_i2c12: i2c-bus at c {
+ reg = <12>; /* OP4A */
+ };
+
+ cfam0_i2c13: i2c-bus at d {
+ reg = <13>; /* OP4B */
+ };
+
+ cfam0_i2c14: i2c-bus at e {
+ reg = <14>; /* OP5A */
+ };
+
+ cfam0_i2c15: i2c-bus at f {
+ reg = <15>; /* OP5B */
+ };
};
fsi2spi at 1c00 {
@@ -412,8 +481,6 @@ fsi_hub0: hub at 3400 {
reg = <0x3400 0x400>;
#address-cells = <2>;
#size-cells = <0>;
-
- no-scan-on-init;
};
};
};
@@ -435,6 +502,38 @@ i2c at 1800 {
reg = <0x1800 0x400>;
#address-cells = <1>;
#size-cells = <0>;
+
+ cfam1_i2c2: i2c-bus at 2 {
+ reg = <2>; /* OMI45 */
+ };
+
+ cfam1_i2c3: i2c-bus at 3 {
+ reg = <3>; /* OMI67 */
+ };
+
+ cfam1_i2c10: i2c-bus at a {
+ reg = <10>; /* OP3A */
+ };
+
+ cfam1_i2c11: i2c-bus at b {
+ reg = <11>; /* OP3B */
+ };
+
+ cfam1_i2c14: i2c-bus at e {
+ reg = <14>; /* OP5A */
+ };
+
+ cfam1_i2c15: i2c-bus at f {
+ reg = <15>; /* OP5B */
+ };
+
+ cfam1_i2c16: i2c-bus at 10 {
+ reg = <16>; /* OP6A */
+ };
+
+ cfam1_i2c17: i2c-bus at 11 {
+ reg = <17>; /* OP6B */
+ };
};
fsi2spi at 1c00 {
@@ -547,6 +646,38 @@ i2c at 1800 {
reg = <0x1800 0x400>;
#address-cells = <1>;
#size-cells = <0>;
+
+ cfam2_i2c0: i2c-bus at 0 {
+ reg = <0>; /* OM01 */
+ };
+
+ cfam2_i2c1: i2c-bus at 1 {
+ reg = <1>; /* OM23 */
+ };
+
+ cfam2_i2c10: i2c-bus at a {
+ reg = <10>; /* OP3A */
+ };
+
+ cfam2_i2c11: i2c-bus at b {
+ reg = <11>; /* OP3B */
+ };
+
+ cfam2_i2c12: i2c-bus at c {
+ reg = <12>; /* OP4A */
+ };
+
+ cfam2_i2c13: i2c-bus at d {
+ reg = <13>; /* OP4B */
+ };
+
+ cfam2_i2c14: i2c-bus at e {
+ reg = <14>; /* OP5A */
+ };
+
+ cfam2_i2c15: i2c-bus at f {
+ reg = <15>; /* OP5B */
+ };
};
fsi2spi at 1c00 {
@@ -642,6 +773,150 @@ fsi_hub2: hub at 3400 {
no-scan-on-init;
};
};
+
+ cfam at 3,0 {
+ reg = <3 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <3>;
+
+ scom at 1000 {
+ compatible = "ibm,fsi2pib";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c at 1800 {
+ compatible = "ibm,fsi-i2c-master";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam3_i2c2: i2c-bus at 2 {
+ reg = <2>; /* OM45 */
+ };
+
+ cfam3_i2c3: i2c-bus at 3 {
+ reg = <3>; /* OM67 */
+ };
+
+ cfam3_i2c10: i2c-bus at a {
+ reg = <10>; /* OP3A */
+ };
+
+ cfam3_i2c11: i2c-bus at b {
+ reg = <11>; /* OP3B */
+ };
+
+ cfam3_i2c14: i2c-bus at e {
+ reg = <14>; /* OP5A */
+ };
+
+ cfam3_i2c15: i2c-bus at f {
+ reg = <15>; /* OP5B */
+ };
+
+ cfam3_i2c16: i2c-bus at 10 {
+ reg = <16>; /* OP6A */
+ };
+
+ cfam3_i2c17: i2c-bus at 11 {
+ reg = <17>; /* OP6B */
+ };
+ };
+
+ fsi2spi at 1c00 {
+ compatible = "ibm,fsi2spi";
+ reg = <0x1c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam3_spi0: spi at 0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom at 0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam3_spi1: spi at 20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom at 0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam3_spi2: spi at 40 {
+ reg = <0x40>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom at 0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ cfam3_spi3: spi at 60 {
+ reg = <0x60>;
+ compatible = "ibm,fsi2spi-restricted";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom at 0 {
+ at25,byte-len = <0x80000>;
+ at25,addr-mode = <4>;
+ at25,page-size = <256>;
+
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+ };
+
+ sbefifo at 2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi_occ3: occ {
+ compatible = "ibm,p10-occ";
+ };
+ };
+
+ fsi_hub3: hub at 3400 {
+ compatible = "fsi-master-hub";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ no-scan-on-init;
+ };
+ };
};
/* Legacy OCC numbering (to get rid of when userspace is fixed) */
@@ -657,6 +932,10 @@ &fsi_occ2 {
reg = <3>;
};
+&fsi_occ3 {
+ reg = <4>;
+};
+
&ibt {
status = "okay";
};
--
2.27.0
More information about the Linux-aspeed
mailing list