[v2 3/8] iio: adc: aspeed: completes the bitfield declare.

[Jonathan Cameron]

On Fri, 23 Jul 2021 16:16:16 +0800
Billy Tsai <billy_tsai at aspeedtech.com> wrote:

> This patch completes the declare of adc register bitfields and uses the
> same prefix ASPEED_ADC_* for these bitfields.
> 
> Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
Hi Billy

See inline,

Thanks,

Jonathan

> ---
>  drivers/iio/adc/aspeed_adc.c | 40 ++++++++++++++++++++++++------------
>  1 file changed, 27 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
> index 19efaa41bc34..99466a5924c7 100644
> --- a/drivers/iio/adc/aspeed_adc.c
> +++ b/drivers/iio/adc/aspeed_adc.c
> @@ -16,6 +16,7 @@
>  #include <linux/reset.h>
>  #include <linux/spinlock.h>
>  #include <linux/types.h>
> +#include <linux/bitfield.h>
>  
>  #include <linux/iio/iio.h>
>  #include <linux/iio/driver.h>
> @@ -28,15 +29,28 @@
>  #define ASPEED_REG_INTERRUPT_CONTROL	0x04
>  #define ASPEED_REG_VGA_DETECT_CONTROL	0x08
>  #define ASPEED_REG_CLOCK_CONTROL	0x0C
> -#define ASPEED_REG_MAX			0xC0
> -
> -#define ASPEED_OPERATION_MODE_POWER_DOWN	(0x0 << 1)
> -#define ASPEED_OPERATION_MODE_STANDBY		(0x1 << 1)
> -#define ASPEED_OPERATION_MODE_NORMAL		(0x7 << 1)
> -
> -#define ASPEED_ENGINE_ENABLE		BIT(0)
> -
> -#define ASPEED_ADC_CTRL_INIT_RDY	BIT(8)
> +#define ASPEED_REG_COMPENSATION_TRIM	0xC4
> +#define ASPEED_REG_MAX			0xCC
> +
> +#define ASPEED_ADC_ENGINE_ENABLE		BIT(0)
> +#define ASPEED_ADC_OPERATION_MODE		GENMASK(3, 1)
> +#define ASPEED_ADC_OPERATION_MODE_POWER_DOWN	FIELD_PREP(ASPEED_ADC_OPERATION_MODE, 0)
It's more common to have the FIELD_PREP at the location where it
is used and just have defines here to be to the value of the field.

Perhaps also consider some abbreviations as I think we can safely
make them here without losing any meaning, given context.

ASPEED_ADC_OP_MODE
ASPEED_ADC_OP_MODE_PWR_DWN
ASPEED_ADC_OP_MODE_STANDBY
ASPEED_ADC_OP_MODE_NORMAL

etc.

> +#define ASPEED_ADC_OPERATION_MODE_STANDBY	FIELD_PREP(ASPEED_ADC_OPERATION_MODE, 1)
> +#define ASPEED_ADC_OPERATION_MODE_NORMAL	FIELD_PREP(ASPEED_ADC_OPERATION_MODE, 7)
> +#define ASPEED_ADC_CTRL_COMPENSATION		BIT(4)
> +#define ASPEED_ADC_AUTO_COMPENSATION		BIT(5)
> +#define ASPEED_ADC_REF_VOLTAGE			GENMASK(7, 6)
> +#define ASPEED_ADC_REF_VOLTAGE_2500mV		FIELD_PREP(ASPEED_ADC_REF_VOLTAGE, 0)
> +#define ASPEED_ADC_REF_VOLTAGE_1200mV		FIELD_PREP(ASPEED_ADC_REF_VOLTAGE, 1)
> +#define ASPEED_ADC_REF_VOLTAGE_EXT_HIGH		FIELD_PREP(ASPEED_ADC_REF_VOLTAGE, 2)
> +#define ASPEED_ADC_REF_VOLTAGE_EXT_LOW		FIELD_PREP(ASPEED_ADC_REF_VOLTAGE, 3)
> +#define ASPEED_ADC_CTRL_INIT_RDY		BIT(8)
> +#define ASPEED_ADC_CH7_MODE			BIT(12)
> +#define ASPEED_ADC_CH7_NORMAL			FIELD_PREP(ASPEED_ADC_CH7_MODE, 0)
> +#define ASPEED_ADC_CH7_BATTERY			FIELD_PREP(ASPEED_ADC_CH7_MODE, 1)
> +#define ASPEED_ADC_BATTERY_SENSING_ENABLE	BIT(13)
> +#define ASPEED_ADC_CTRL_CHANNEL			GENMASK(31, 16)
> +#define ASPEED_ADC_CTRL_CHANNEL_ENABLE(ch)	FIELD_PREP(ASPEED_ADC_CTRL_CHANNEL, BIT(ch))
>  
>  #define ASPEED_ADC_INIT_POLLING_TIME	500
>  #define ASPEED_ADC_INIT_TIMEOUT		500000
> @@ -226,7 +240,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
>  
>  	if (model_data->wait_init_sequence) {
>  		/* Enable engine in normal mode. */
> -		writel(ASPEED_OPERATION_MODE_NORMAL | ASPEED_ENGINE_ENABLE,
> +		writel(ASPEED_ADC_OPERATION_MODE_NORMAL | ASPEED_ADC_ENGINE_ENABLE,
>  		       data->base + ASPEED_REG_ENGINE_CONTROL);
>  
>  		/* Wait for initial sequence complete. */
> @@ -246,7 +260,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
>  		goto clk_enable_error;
>  
>  	adc_engine_control_reg_val = GENMASK(31, 16) |
> -		ASPEED_OPERATION_MODE_NORMAL | ASPEED_ENGINE_ENABLE;
> +		ASPEED_ADC_OPERATION_MODE_NORMAL | ASPEED_ADC_ENGINE_ENABLE;
>  	writel(adc_engine_control_reg_val,
>  		data->base + ASPEED_REG_ENGINE_CONTROL);
>  
> @@ -264,7 +278,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)
>  	return 0;
>  
>  iio_register_error:
> -	writel(ASPEED_OPERATION_MODE_POWER_DOWN,
> +	writel(ASPEED_ADC_OPERATION_MODE_POWER_DOWN,
>  		data->base + ASPEED_REG_ENGINE_CONTROL);
>  	clk_disable_unprepare(data->clk_scaler->clk);
>  clk_enable_error:
> @@ -283,7 +297,7 @@ static int aspeed_adc_remove(struct platform_device *pdev)
>  	struct aspeed_adc_data *data = iio_priv(indio_dev);
>  
>  	iio_device_unregister(indio_dev);
> -	writel(ASPEED_OPERATION_MODE_POWER_DOWN,
> +	writel(ASPEED_ADC_OPERATION_MODE_POWER_DOWN,
>  		data->base + ASPEED_REG_ENGINE_CONTROL);
>  	clk_disable_unprepare(data->clk_scaler->clk);
>  	reset_control_assert(data->rst);