[PATCH v5 3/4] hwmon: smpro: Add Ampere's Altra smpro-hwmon driver
Quan Nguyen
quan at os.amperecomputing.com
Tue Jul 13 16:00:30 AEST 2021
This commit adds support for Ampere SMpro hwmon driver. This driver
supports accessing various CPU sensors provided by the SMpro co-processor
including temperature, power, voltages, and current.
Signed-off-by: Quan Nguyen <quan at os.amperecomputing.com>
---
Changes in v5:
+ Drop ManufacturerID checking when probe as it was checked during
smpro-mfd probing [Quan]
+ Drop the use of register offset [Quan]
+ Removed the use of compatible string as it is instantiated by
smpro-mfd driver [Quan]
+ Thanks Guenter for the Reviewed-by in last version, but it was
not added because there's some changes in this version. Really
appreciate if you could help again, thank you.
Changes in v4:
+ Returned regmap_read() error code [Guenter]
Changes in v3:
+ Handled negative temperature value [Guenter]
+ Returned -ENODEV if Manufacturer ID is wrong [Guenter]
+ Refactored smpro_read_string() and smpro_temp_read() [Guenter]
+ Removed smpro_write() function [Guenter]
+ Added minor refactor changes [Quan]
Changes in v2:
+ Removed "virtual" sensors [Guenter]
+ Reported SOC_TDP as "Socket TDP" using max attributes [Guenter]
+ Corrected return error code when host is turn off [Guenter]
+ Reported MEM HOT Threshold for all DIMMs as temp*_crit [Guenter]
+ Removed license info as SPDX-License-Identifier existed [Guenter]
+ Added is_visible() support [Guenter]
+ Used HWMON_CHANNEL_INFO() macro and LABEL attributes [Guenter]
+ Made is_valid_id() return boolean [Guenter]
+ Returned -EPROBE_DEFER when smpro reg inaccessible [Guenter]
+ Removed unnecessary error message when dev register fail [Guenter]
+ Removed Socket TDP sensor [Quan]
+ Included sensor type and channel in labels [Quan]
+ Refactorized code to fix checkpatch.pl --strict complaint [Quan]
drivers/hwmon/Kconfig | 8 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/smpro-hwmon.c | 463 ++++++++++++++++++++++++++++++++++++
3 files changed, 472 insertions(+)
create mode 100644 drivers/hwmon/smpro-hwmon.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e3675377bc5d..903c5ef79a5a 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -67,6 +67,14 @@ config SENSORS_ABITUGURU3
This driver can also be built as a module. If so, the module
will be called abituguru3.
+config SENSORS_SMPRO
+ tristate "Ampere's Altra SMpro hardware monitoring driver"
+ depends on MFD_SMPRO
+ help
+ If you say yes here you get support for the thermal, voltage,
+ current and power sensors of Ampere's Altra processor family SoC
+ with SMpro co-processor.
+
config SENSORS_AD7314
tristate "Analog Devices AD7314 and compatibles"
depends on SPI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index d712c61c1f5e..9de5cd9911b0 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -175,6 +175,7 @@ obj-$(CONFIG_SENSORS_SHT4x) += sht4x.o
obj-$(CONFIG_SENSORS_SHTC1) += shtc1.o
obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
obj-$(CONFIG_SENSORS_SMM665) += smm665.o
+obj-$(CONFIG_SENSORS_SMPRO) += smpro-hwmon.o
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
diff --git a/drivers/hwmon/smpro-hwmon.c b/drivers/hwmon/smpro-hwmon.c
new file mode 100644
index 000000000000..b01ceea33ddd
--- /dev/null
+++ b/drivers/hwmon/smpro-hwmon.c
@@ -0,0 +1,463 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Ampere Computing SoC's SMPro Hardware Monitoring Driver
+ *
+ * Copyright (c) 2021, Ampere Computing LLC
+ */
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+/* Logical Power Sensor Registers */
+#define SOC_TEMP 0x10
+#define SOC_VRD_TEMP 0x11
+#define DIMM_VRD_TEMP 0x12
+#define CORE_VRD_TEMP 0x13
+#define CH0_DIMM_TEMP 0x14
+#define CH1_DIMM_TEMP 0x15
+#define CH2_DIMM_TEMP 0x16
+#define CH3_DIMM_TEMP 0x17
+#define CH4_DIMM_TEMP 0x18
+#define CH5_DIMM_TEMP 0x19
+#define CH6_DIMM_TEMP 0x1A
+#define CH7_DIMM_TEMP 0x1B
+#define RCA_VRD_TEMP 0x1C
+
+#define CORE_VRD_PWR 0x20
+#define SOC_PWR 0x21
+#define DIMM_VRD1_PWR 0x22
+#define DIMM_VRD2_PWR 0x23
+#define CORE_VRD_PWR_MW 0x26
+#define SOC_PWR_MW 0x27
+#define DIMM_VRD1_PWR_MW 0x28
+#define DIMM_VRD2_PWR_MW 0x29
+#define RCA_VRD_PWR 0x2A
+#define RCA_VRD_PWR_MW 0x2B
+
+#define MEM_HOT_THRESHOLD 0x32
+#define SOC_VR_HOT_THRESHOLD 0x33
+#define CORE_VRD_VOLT 0x34
+#define SOC_VRD_VOLT 0x35
+#define DIMM_VRD1_VOLT 0x36
+#define DIMM_VRD2_VOLT 0x37
+#define RCA_VRD_VOLT 0x38
+
+#define CORE_VRD_CURR 0x39
+#define SOC_VRD_CURR 0x3A
+#define DIMM_VRD1_CURR 0x3B
+#define DIMM_VRD2_CURR 0x3C
+#define RCA_VRD_CURR 0x3D
+
+struct smpro_hwmon {
+ struct regmap *regmap;
+};
+
+struct smpro_sensor {
+ const u8 reg;
+ const u8 reg_ext;
+ const char *label;
+};
+
+static const struct smpro_sensor temperature[] = {
+ {
+ .reg = SOC_TEMP,
+ .label = "temp1 SoC"
+ },
+ {
+ .reg = SOC_VRD_TEMP,
+ .reg_ext = SOC_VR_HOT_THRESHOLD,
+ .label = "temp2 SoC VRD"
+ },
+ {
+ .reg = DIMM_VRD_TEMP,
+ .label = "temp3 DIMM VRD"
+ },
+ {
+ .reg = CORE_VRD_TEMP,
+ .label = "temp4 CORE VRD"
+ },
+ {
+ .reg = CH0_DIMM_TEMP,
+ .reg_ext = MEM_HOT_THRESHOLD,
+ .label = "temp5 CH0 DIMM"
+ },
+ {
+ .reg = CH1_DIMM_TEMP,
+ .reg_ext = MEM_HOT_THRESHOLD,
+ .label = "temp6 CH1 DIMM"
+ },
+ {
+ .reg = CH2_DIMM_TEMP,
+ .reg_ext = MEM_HOT_THRESHOLD,
+ .label = "temp7 CH2 DIMM"
+ },
+ {
+ .reg = CH3_DIMM_TEMP,
+ .reg_ext = MEM_HOT_THRESHOLD,
+ .label = "temp8 CH3 DIMM"
+ },
+ {
+ .reg = CH4_DIMM_TEMP,
+ .reg_ext = MEM_HOT_THRESHOLD,
+ .label = "temp9 CH4 DIMM"
+ },
+ {
+ .reg = CH5_DIMM_TEMP,
+ .reg_ext = MEM_HOT_THRESHOLD,
+ .label = "temp10 CH5 DIMM"
+ },
+ {
+ .reg = CH6_DIMM_TEMP,
+ .reg_ext = MEM_HOT_THRESHOLD,
+ .label = "temp11 CH6 DIMM"
+ },
+ {
+ .reg = CH7_DIMM_TEMP,
+ .reg_ext = MEM_HOT_THRESHOLD,
+ .label = "temp12 CH7 DIMM"
+ },
+ {
+ .reg = RCA_VRD_TEMP,
+ .label = "temp13 RCA VRD"
+ },
+};
+
+static const struct smpro_sensor voltage[] = {
+ {
+ .reg = CORE_VRD_VOLT,
+ .label = "vout0 CORE VRD"
+ },
+ {
+ .reg = SOC_VRD_VOLT,
+ .label = "vout1 SoC VRD"
+ },
+ {
+ .reg = DIMM_VRD1_VOLT,
+ .label = "vout2 DIMM VRD1"
+ },
+ {
+ .reg = DIMM_VRD2_VOLT,
+ .label = "vout3 DIMM VRD2"
+ },
+ {
+ .reg = RCA_VRD_VOLT,
+ .label = "vout4 RCA VRD"
+ },
+};
+
+static const struct smpro_sensor curr_sensor[] = {
+ {
+ .reg = CORE_VRD_CURR,
+ .label = "iout1 CORE VRD"
+ },
+ {
+ .reg = SOC_VRD_CURR,
+ .label = "iout2 SoC VRD"
+ },
+ {
+ .reg = DIMM_VRD1_CURR,
+ .label = "iout3 DIMM VRD1"
+ },
+ {
+ .reg = DIMM_VRD2_CURR,
+ .label = "iout4 DIMM VRD2"
+ },
+ {
+ .reg = RCA_VRD_CURR,
+ .label = "iout5 RCA VRD"
+ },
+};
+
+static const struct smpro_sensor power[] = {
+ {
+ .reg = CORE_VRD_PWR,
+ .reg_ext = CORE_VRD_PWR_MW,
+ .label = "power1 CORE VRD"
+ },
+ {
+ .reg = SOC_PWR,
+ .reg_ext = SOC_PWR_MW,
+ .label = "power2 SoC"
+ },
+ {
+ .reg = DIMM_VRD1_PWR,
+ .reg_ext = DIMM_VRD1_PWR_MW,
+ .label = "power3 DIMM VRD1"
+ },
+ {
+ .reg = DIMM_VRD2_PWR,
+ .reg_ext = DIMM_VRD2_PWR_MW,
+ .label = "power4 DIMM VRD2"
+ },
+ {
+ .reg = RCA_VRD_PWR,
+ .reg_ext = RCA_VRD_PWR_MW,
+ .label = "power5 RCA VRD"
+ },
+};
+
+static int smpro_read_temp(struct device *dev, u32 attr, int channel, long *val)
+{
+ struct smpro_hwmon *hwmon = dev_get_drvdata(dev);
+ unsigned int value;
+ int ret;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ ret = regmap_read(hwmon->regmap, temperature[channel].reg, &value);
+ if (ret)
+ return ret;
+ break;
+ case hwmon_temp_crit:
+ ret = regmap_read(hwmon->regmap, temperature[channel].reg_ext, &value);
+ if (ret)
+ return ret;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ *val = sign_extend32(value, 8) * 1000;
+ return 0;
+}
+
+static int smpro_read_in(struct device *dev, u32 attr, int channel, long *val)
+{
+ struct smpro_hwmon *hwmon = dev_get_drvdata(dev);
+ unsigned int value;
+ int ret;
+
+ switch (attr) {
+ case hwmon_in_input:
+ ret = regmap_read(hwmon->regmap, voltage[channel].reg, &value);
+ if (ret < 0)
+ return ret;
+ /* 15-bit value in 1mV */
+ *val = value & 0x7fff;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int smpro_read_curr(struct device *dev, u32 attr, int channel, long *val)
+{
+ struct smpro_hwmon *hwmon = dev_get_drvdata(dev);
+ unsigned int value;
+ int ret;
+
+ switch (attr) {
+ case hwmon_curr_input:
+ ret = regmap_read(hwmon->regmap, curr_sensor[channel].reg, &value);
+ if (ret < 0)
+ return ret;
+ /* Scale reported by the hardware is 1mA */
+ *val = value & 0x7fff;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int smpro_read_power(struct device *dev, u32 attr, int channel, long *val_pwr)
+{
+ struct smpro_hwmon *hwmon = dev_get_drvdata(dev);
+ unsigned int val = 0, val_mw = 0;
+ int ret;
+
+ switch (attr) {
+ case hwmon_power_input:
+ ret = regmap_read(hwmon->regmap, power[channel].reg, &val);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(hwmon->regmap, power[channel].reg_ext, &val_mw);
+ if (ret)
+ return ret;
+
+ *val_pwr = val * 1000000 + val_mw * 1000;
+ return 0;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int smpro_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ switch (type) {
+ case hwmon_temp:
+ return smpro_read_temp(dev, attr, channel, val);
+ case hwmon_in:
+ return smpro_read_in(dev, attr, channel, val);
+ case hwmon_power:
+ return smpro_read_power(dev, attr, channel, val);
+ case hwmon_curr:
+ return smpro_read_curr(dev, attr, channel, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int smpro_read_string(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, const char **str)
+{
+ switch (type) {
+ case hwmon_temp:
+ switch (attr) {
+ case hwmon_temp_label:
+ *str = temperature[channel].label;
+ return 0;
+ default:
+ break;
+ }
+ break;
+
+ case hwmon_in:
+ switch (attr) {
+ case hwmon_in_label:
+ *str = voltage[channel].label;
+ return 0;
+ default:
+ break;
+ }
+ break;
+
+ case hwmon_curr:
+ switch (attr) {
+ case hwmon_curr_label:
+ *str = curr_sensor[channel].label;
+ return 0;
+ default:
+ break;
+ }
+ break;
+
+ case hwmon_power:
+ switch (attr) {
+ case hwmon_power_label:
+ *str = power[channel].label;
+ return 0;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static umode_t smpro_is_visible(const void *data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct smpro_hwmon *hwmon = data;
+ unsigned int value;
+ int ret;
+
+ switch (type) {
+ case hwmon_temp:
+ switch (attr) {
+ case hwmon_temp_input:
+ case hwmon_temp_label:
+ case hwmon_temp_crit:
+ ret = regmap_read(hwmon->regmap, temperature[channel].reg, &value);
+ if (ret || value == 0xFFFF)
+ return 0;
+ break;
+ }
+ default:
+ break;
+ }
+
+ return 0444;
+}
+
+static const struct hwmon_channel_info *smpro_info[] = {
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL,
+ HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT,
+ HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT,
+ HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT,
+ HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT,
+ HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT,
+ HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT,
+ HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT,
+ HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_CRIT,
+ HWMON_T_INPUT | HWMON_T_LABEL),
+ HWMON_CHANNEL_INFO(in,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL),
+ HWMON_CHANNEL_INFO(power,
+ HWMON_P_INPUT | HWMON_P_LABEL,
+ HWMON_P_INPUT | HWMON_P_LABEL,
+ HWMON_P_INPUT | HWMON_P_LABEL,
+ HWMON_P_INPUT | HWMON_P_LABEL,
+ HWMON_P_INPUT | HWMON_P_LABEL),
+ HWMON_CHANNEL_INFO(curr,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL,
+ HWMON_C_INPUT | HWMON_C_LABEL),
+ NULL
+};
+
+static const struct hwmon_ops smpro_hwmon_ops = {
+ .is_visible = smpro_is_visible,
+ .read = smpro_read,
+ .read_string = smpro_read_string,
+};
+
+static const struct hwmon_chip_info smpro_chip_info = {
+ .ops = &smpro_hwmon_ops,
+ .info = smpro_info,
+};
+
+static int smpro_hwmon_probe(struct platform_device *pdev)
+{
+ struct smpro_hwmon *hwmon;
+ struct device *hwmon_dev;
+
+ hwmon = devm_kzalloc(&pdev->dev, sizeof(struct smpro_hwmon), GFP_KERNEL);
+ if (!hwmon)
+ return -ENOMEM;
+
+ hwmon->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!hwmon->regmap)
+ return -ENODEV;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, "smpro_hwmon",
+ hwmon, &smpro_chip_info, NULL);
+
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static struct platform_driver smpro_hwmon_driver = {
+ .probe = smpro_hwmon_probe,
+ .driver = {
+ .name = "smpro-hwmon",
+ },
+};
+
+module_platform_driver(smpro_hwmon_driver);
+
+MODULE_AUTHOR("Thu Nguyen <thu at os.amperecomputing.com>");
+MODULE_AUTHOR("Quan Nguyen <quan at os.amperecomputing.com>");
+MODULE_DESCRIPTION("Ampere Altra SMPro hwmon driver");
+MODULE_LICENSE("GPL v2");
--
2.28.0
More information about the Linux-aspeed
mailing list