[PATCH 1/1] usb: gadget: aspeed: fix stop dma register setting.

[Ryan Chen]

The vhub engine has two dma mode, one is descriptor list, another
is single stage DMA. Each mode has different stop register setting.
Descriptor list operation (bit2) : 0 disable reset, 1: enable reset
Single mode operation (bit0) : 0 : disable, 1: enable

Signed-off-by: Ryan Chen <ryan_chen at aspeedtech.com>
---
 drivers/usb/gadget/udc/aspeed-vhub/epn.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
index 0bd6b20435b8..02d8bfae58fb 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
@@ -420,7 +420,10 @@ static void ast_vhub_stop_active_req(struct ast_vhub_ep *ep,
 	u32 state, reg, loops;
 
 	/* Stop DMA activity */
-	writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+	if (ep->epn.desc_mode)
+		writel(VHUB_EP_DMA_CTRL_RESET, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+	else
+		writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
 
 	/* Wait for it to complete */
 	for (loops = 0; loops < 1000; loops++) {
-- 
2.17.1