[PATCH 5/6] soc: aspeed: Add eSPI driver

[Rob Herring]

On Wed, Jan 06, 2021 at 01:59:38PM +0800, Chia-Wei, Wang wrote:
> The Aspeed eSPI controller is slave device to communicate with
> the master through the Enhanced Serial Peripheral Interface (eSPI).
> All of the four eSPI channels, namely peripheral, virtual wire,
> out-of-band, and flash are supported.
> 
> Signed-off-by: Chia-Wei, Wang <chiawei_wang at aspeedtech.com>
> ---
>  drivers/soc/aspeed/Kconfig                  |  49 ++
>  drivers/soc/aspeed/Makefile                 |   5 +
>  drivers/soc/aspeed/aspeed-espi-ctrl.c       | 197 ++++++
>  drivers/soc/aspeed/aspeed-espi-flash.c      | 490 ++++++++++++++
>  drivers/soc/aspeed/aspeed-espi-oob.c        | 706 ++++++++++++++++++++
>  drivers/soc/aspeed/aspeed-espi-peripheral.c | 613 +++++++++++++++++
>  drivers/soc/aspeed/aspeed-espi-vw.c         | 211 ++++++
>  include/uapi/linux/aspeed-espi.h            | 160 +++++
>  8 files changed, 2431 insertions(+)
>  create mode 100644 drivers/soc/aspeed/aspeed-espi-ctrl.c
>  create mode 100644 drivers/soc/aspeed/aspeed-espi-flash.c
>  create mode 100644 drivers/soc/aspeed/aspeed-espi-oob.c
>  create mode 100644 drivers/soc/aspeed/aspeed-espi-peripheral.c
>  create mode 100644 drivers/soc/aspeed/aspeed-espi-vw.c

drivers/spi/ is the correct location for a SPI controller.

>  create mode 100644 include/uapi/linux/aspeed-espi.h

This userspace interface is not going to be accepted upstream.

I'd suggest you look at similar SPI flash capable SPI controller drivers 
upstream and model your driver after them. This looks like it needs 
major reworking.

Rob