[PATCH v2 4/6] ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC

[Tao Ren]

Hi Andrew,

On Fri, Aug 13, 2021 at 04:45:58PM +0200, Andrew Lunn wrote:
> On Thu, Aug 12, 2021 at 08:40:17PM -0700, Tao Ren wrote:
> > On Fri, Aug 13, 2021 at 01:29:17AM +0000, Joel Stanley wrote:
> > > On Thu, 5 Aug 2021 at 22:28, <rentao.bupt at gmail.com> wrote:
> > > > +&mdio1 {
> > > > +       status = "okay";
> > > 
> > > You're enabling this but it looks like it's unused?
> > 
> > Thanks Joel for the careful review. The MDIO controller is not paired
> > with BMC MAC; instead, it's connected to the MDC/MDIO interface of the
> > on-board switch (whose ports are connected to BMC, Host and front panel
> > management port).
> 
> What switch is it? Is there a DSA driver for it? drivers/net/dsa/*
> Ideally you want Linux to be controlling the switch, in the standard
> linux way.
> 
>      Andrew

Thanks for jumping in. We are using BCM5389 and the MDIO bus is used to
access BCM5389 MDC/MDIO interface in Pseudo-PHY mode.

I didn't know drivers/net/dsa, but let me check out the drivers and see
if it works in the Cloudripper environment.


Thanks,

Tao