[PATCH v2 12/15] hwmon: peci: Add cputemp driver
Guenter Roeck
linux at roeck-us.net
Wed Aug 4 01:24:14 AEST 2021
On 8/3/21 4:31 AM, Iwona Winiarska wrote:
> Add peci-cputemp driver for Digital Thermal Sensor (DTS) thermal
> readings of the processor package and processor cores that are
> accessible via the PECI interface.
>
> The main use case for the driver (and PECI interface) is out-of-band
> management, where we're able to obtain the DTS readings from an external
> entity connected with PECI, e.g. BMC on server platforms.
>
> Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
> Signed-off-by: Iwona Winiarska <iwona.winiarska at intel.com>
> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
> ---
> MAINTAINERS | 7 +
> drivers/hwmon/Kconfig | 2 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/peci/Kconfig | 18 ++
> drivers/hwmon/peci/Makefile | 5 +
> drivers/hwmon/peci/common.h | 58 ++++
> drivers/hwmon/peci/cputemp.c | 591 +++++++++++++++++++++++++++++++++++
> 7 files changed, 682 insertions(+)
> create mode 100644 drivers/hwmon/peci/Kconfig
> create mode 100644 drivers/hwmon/peci/Makefile
> create mode 100644 drivers/hwmon/peci/common.h
> create mode 100644 drivers/hwmon/peci/cputemp.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3f5d48e1d143..e36b5c0824e3 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14512,6 +14512,13 @@ L: platform-driver-x86 at vger.kernel.org
> S: Maintained
> F: drivers/platform/x86/peaq-wmi.c
>
> +PECI HARDWARE MONITORING DRIVERS
> +M: Iwona Winiarska <iwona.winiarska at intel.com>
> +R: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
> +L: linux-hwmon at vger.kernel.org
> +S: Supported
> +F: drivers/hwmon/peci/
> +
> PECI SUBSYSTEM
> M: Iwona Winiarska <iwona.winiarska at intel.com>
> R: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index e3675377bc5d..61c0e3404415 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1507,6 +1507,8 @@ config SENSORS_PCF8591
> These devices are hard to detect and rarely found on mainstream
> hardware. If unsure, say N.
>
> +source "drivers/hwmon/peci/Kconfig"
> +
> source "drivers/hwmon/pmbus/Kconfig"
>
> config SENSORS_PWM_FAN
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index d712c61c1f5e..f52331f212ed 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -202,6 +202,7 @@ obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
> obj-$(CONFIG_SENSORS_XGENE) += xgene-hwmon.o
>
> obj-$(CONFIG_SENSORS_OCC) += occ/
> +obj-$(CONFIG_SENSORS_PECI) += peci/
> obj-$(CONFIG_PMBUS) += pmbus/
>
> ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
> diff --git a/drivers/hwmon/peci/Kconfig b/drivers/hwmon/peci/Kconfig
> new file mode 100644
> index 000000000000..e10eed68d70a
> --- /dev/null
> +++ b/drivers/hwmon/peci/Kconfig
> @@ -0,0 +1,18 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +config SENSORS_PECI_CPUTEMP
> + tristate "PECI CPU temperature monitoring client"
> + depends on PECI
> + select SENSORS_PECI
> + select PECI_CPU
> + help
> + If you say yes here you get support for the generic Intel PECI
> + cputemp driver which provides Digital Thermal Sensor (DTS) thermal
> + readings of the CPU package and CPU cores that are accessible via
> + the processor PECI interface.
> +
> + This driver can also be built as a module. If so, the module
> + will be called peci-cputemp.
> +
> +config SENSORS_PECI
> + tristate
> diff --git a/drivers/hwmon/peci/Makefile b/drivers/hwmon/peci/Makefile
> new file mode 100644
> index 000000000000..e8a0ada5ab1f
> --- /dev/null
> +++ b/drivers/hwmon/peci/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +peci-cputemp-y := cputemp.o
> +
> +obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o
> diff --git a/drivers/hwmon/peci/common.h b/drivers/hwmon/peci/common.h
> new file mode 100644
> index 000000000000..734506b0eca2
> --- /dev/null
> +++ b/drivers/hwmon/peci/common.h
> @@ -0,0 +1,58 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/* Copyright (c) 2021 Intel Corporation */
> +
> +#include <linux/mutex.h>
> +#include <linux/types.h>
> +
> +#ifndef __PECI_HWMON_COMMON_H
> +#define __PECI_HWMON_COMMON_H
> +
> +#define PECI_HWMON_UPDATE_INTERVAL HZ
> +
> +/**
> + * struct peci_sensor_state - PECI state information
> + * @valid: flag to indicate the sensor value is valid
> + * @last_updated: time of the last update in jiffies
> + * @lock: mutex to protect sensor access
> + */
> +struct peci_sensor_state {
> + bool valid;
> + unsigned long last_updated;
> + struct mutex lock; /* protect sensor access */
> +};
> +
> +/**
> + * struct peci_sensor_data - PECI sensor information
> + * @value: sensor value in milli units
> + * @state: sensor update state
> + */
> +
> +struct peci_sensor_data {
> + s32 value;
> + struct peci_sensor_state state;
> +};
> +
> +/**
> + * peci_sensor_need_update() - check whether sensor update is needed or not
> + * @sensor: pointer to sensor data struct
> + *
> + * Return: true if update is needed, false if not.
> + */
> +
> +static inline bool peci_sensor_need_update(struct peci_sensor_state *state)
> +{
> + return !state->valid ||
> + time_after(jiffies, state->last_updated + PECI_HWMON_UPDATE_INTERVAL);
> +}
> +
> +/**
> + * peci_sensor_mark_updated() - mark the sensor is updated
> + * @sensor: pointer to sensor data struct
> + */
> +static inline void peci_sensor_mark_updated(struct peci_sensor_state *state)
> +{
> + state->valid = true;
> + state->last_updated = jiffies;
> +}
> +
> +#endif /* __PECI_HWMON_COMMON_H */
> diff --git a/drivers/hwmon/peci/cputemp.c b/drivers/hwmon/peci/cputemp.c
> new file mode 100644
> index 000000000000..9c6858a9fb6d
> --- /dev/null
> +++ b/drivers/hwmon/peci/cputemp.c
> @@ -0,0 +1,591 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +// Copyright (c) 2018-2021 Intel Corporation
> +
> +#include <linux/auxiliary_bus.h>
> +#include <linux/bitfield.h>
> +#include <linux/bitops.h>
> +#include <linux/hwmon.h>
> +#include <linux/jiffies.h>
> +#include <linux/module.h>
> +#include <linux/peci.h>
> +#include <linux/peci-cpu.h>
> +#include <linux/units.h>
> +#include <linux/x86/intel-family.h>
> +
> +#include "common.h"
> +
> +#define CORE_NUMS_MAX 64
> +
> +#define BASE_CHANNEL_NUMS 5
> +#define CPUTEMP_CHANNEL_NUMS (BASE_CHANNEL_NUMS + CORE_NUMS_MAX)
> +
> +#define TEMP_TARGET_FAN_TEMP_MASK GENMASK(15, 8)
> +#define TEMP_TARGET_REF_TEMP_MASK GENMASK(23, 16)
> +#define TEMP_TARGET_TJ_OFFSET_MASK GENMASK(29, 24)
> +
> +#define DTS_MARGIN_MASK GENMASK(15, 0)
> +#define PCS_MODULE_TEMP_MASK GENMASK(15, 0)
> +
> +#define DTS_FIXED_POINT_FRACTION 64
> +
> +struct resolved_cores_reg {
> + u8 bus;
> + u8 dev;
> + u8 func;
> + u8 offset;
> +};
> +
> +struct cpu_info {
> + struct resolved_cores_reg *reg;
> + u8 min_peci_revision;
> +};
> +
> +struct peci_temp_target {
> + s32 tcontrol;
> + s32 tthrottle;
> + s32 tjmax;
> + struct peci_sensor_state state;
> +};
> +
> +enum peci_temp_target_type {
> + tcontrol_type,
> + tthrottle_type,
> + tjmax_type,
> + crit_hyst_type,
> +};
> +
> +struct peci_cputemp {
> + struct peci_device *peci_dev;
> + struct device *dev;
> + const char *name;
> + const struct cpu_info *gen_info;
> + struct {
> + struct peci_temp_target target;
> + struct peci_sensor_data die;
> + struct peci_sensor_data dts;
> + struct peci_sensor_data core[CORE_NUMS_MAX];
> + } temp;
> + const char **coretemp_label;
> + DECLARE_BITMAP(core_mask, CORE_NUMS_MAX);
> +};
> +
> +enum cputemp_channels {
> + channel_die,
> + channel_dts,
> + channel_tcontrol,
> + channel_tthrottle,
> + channel_tjmax,
> + channel_core,
> +};
> +
> +static const char * const cputemp_label[BASE_CHANNEL_NUMS] = {
> + "Die",
> + "DTS",
> + "Tcontrol",
> + "Tthrottle",
> + "Tjmax",
> +};
> +
> +static int update_temp_target(struct peci_cputemp *priv)
> +{
> + s32 tthrottle_offset, tcontrol_margin;
> + u32 pcs;
> + int ret;
> +
> + if (!peci_sensor_need_update(&priv->temp.target.state))
> + return 0;
> +
> + ret = peci_pcs_read(priv->peci_dev, PECI_PCS_TEMP_TARGET, 0, &pcs);
> + if (ret)
> + return ret;
> +
> + priv->temp.target.tjmax =
> + FIELD_GET(TEMP_TARGET_REF_TEMP_MASK, pcs) * MILLIDEGREE_PER_DEGREE;
> +
> + tcontrol_margin = FIELD_GET(TEMP_TARGET_FAN_TEMP_MASK, pcs);
> + tcontrol_margin = sign_extend32(tcontrol_margin, 7) * MILLIDEGREE_PER_DEGREE;
> + priv->temp.target.tcontrol = priv->temp.target.tjmax - tcontrol_margin;
> +
> + tthrottle_offset = FIELD_GET(TEMP_TARGET_TJ_OFFSET_MASK, pcs) * MILLIDEGREE_PER_DEGREE;
> + priv->temp.target.tthrottle = priv->temp.target.tjmax - tthrottle_offset;
> +
> + peci_sensor_mark_updated(&priv->temp.target.state);
> +
> + return 0;
> +}
> +
> +static int get_temp_target(struct peci_cputemp *priv, enum peci_temp_target_type type, long *val)
> +{
> + int ret;
> +
> + mutex_lock(&priv->temp.target.state.lock);
> +
> + ret = update_temp_target(priv);
> + if (ret)
> + goto unlock;
> +
> + switch (type) {
> + case tcontrol_type:
> + *val = priv->temp.target.tcontrol;
> + break;
> + case tthrottle_type:
> + *val = priv->temp.target.tthrottle;
> + break;
> + case tjmax_type:
> + *val = priv->temp.target.tjmax;
> + break;
> + case crit_hyst_type:
> + *val = priv->temp.target.tjmax - priv->temp.target.tcontrol;
> + break;
> + default:
> + ret = -EOPNOTSUPP;
> + break;
> + }
> +unlock:
> + mutex_unlock(&priv->temp.target.state.lock);
> +
> + return ret;
> +}
> +
> +/*
> + * Processors return a value of DTS reading in S10.6 fixed point format
> + * (16 bits: 10-bit signed magnitude, 6-bit fraction).
> + * Error codes:
> + * 0x8000: General sensor error
> + * 0x8001: Reserved
> + * 0x8002: Underflow on reading value
> + * 0x8003-0x81ff: Reserved
> + */
> +static bool dts_valid(s32 val)
> +{
> + return val < 0x8000 || val > 0x81ff;
> +}
> +
> +static s32 dts_to_millidegree(s32 val)
> +{
> + return sign_extend32(val, 15) * MILLIDEGREE_PER_DEGREE / DTS_FIXED_POINT_FRACTION;
> +}
> +
> +static int get_die_temp(struct peci_cputemp *priv, long *val)
> +{
> + long tjmax;
> + s16 temp;
> + int ret;
> +
> + mutex_lock(&priv->temp.die.state.lock);
> + if (!peci_sensor_need_update(&priv->temp.die.state))
> + goto skip_update;
> +
> + ret = peci_temp_read(priv->peci_dev, &temp);
> + if (ret)
> + goto err_unlock;
> +
> + if (!dts_valid(temp)) {
> + ret = -EIO;
> + goto err_unlock;
> + }
> +
> + ret = get_temp_target(priv, tjmax_type, &tjmax);
> + if (ret)
> + goto err_unlock;
> +
> + priv->temp.die.value = (s32)tjmax + dts_to_millidegree(temp);
> +
> + peci_sensor_mark_updated(&priv->temp.die.state);
> +
> +skip_update:
> + *val = priv->temp.die.value;
> + mutex_unlock(&priv->temp.die.state.lock);
> +
> + return 0;
> +
> +err_unlock:
> + mutex_unlock(&priv->temp.die.state.lock);
> + return ret;
> +}
> +
> +static int get_dts(struct peci_cputemp *priv, long *val)
> +{
> + s32 dts_margin;
> + long tcontrol;
> + u32 pcs;
> + int ret;
> +
> + mutex_lock(&priv->temp.dts.state.lock);
> + if (!peci_sensor_need_update(&priv->temp.dts.state))
> + goto skip_update;
> +
> + ret = peci_pcs_read(priv->peci_dev, PECI_PCS_THERMAL_MARGIN, 0, &pcs);
> + if (ret)
> + goto err_unlock;
> +
> + dts_margin = FIELD_GET(DTS_MARGIN_MASK, pcs);
> + if (!dts_valid(dts_margin)) {
> + ret = -EIO;
> + goto err_unlock;
> + }
> +
> + ret = get_temp_target(priv, tcontrol_type, &tcontrol);
> + if (ret)
> + goto err_unlock;
> +
> + /* Note that the tcontrol should be available before calling it */
> + priv->temp.dts.value = (s32)tcontrol - dts_to_millidegree(dts_margin);
> +
> + peci_sensor_mark_updated(&priv->temp.dts.state);
> +
> +skip_update:
> + *val = priv->temp.dts.value;
> + mutex_unlock(&priv->temp.dts.state.lock);
> +
> + return 0;
> +
> +err_unlock:
> + mutex_unlock(&priv->temp.dts.state.lock);
> + return ret;
Simplify (see below)
> +}
> +
> +static int get_core_temp(struct peci_cputemp *priv, int core_index, long *val)
> +{
> + s32 core_dts_margin;
> + long tjmax;
> + u32 pcs;
> + int ret;
int ret = 0;
to handle simplification below.
> +
> + mutex_lock(&priv->temp.core[core_index].state.lock);
> + if (!peci_sensor_need_update(&priv->temp.core[core_index].state))
> + goto skip_update;
> +
> + ret = peci_pcs_read(priv->peci_dev, PECI_PCS_MODULE_TEMP, core_index, &pcs);
> + if (ret)
> + goto err_unlock;
> +
> + core_dts_margin = FIELD_GET(PCS_MODULE_TEMP_MASK, pcs);
> + if (!dts_valid(core_dts_margin)) {
> + ret = -EIO;
> + goto err_unlock;
> + }
> +
> + ret = get_temp_target(priv, tjmax_type, &tjmax);
> + if (ret)
> + goto err_unlock;
> +
> + /* Note that the tjmax should be available before calling it */
> + priv->temp.core[core_index].value = (s32)tjmax + dts_to_millidegree(core_dts_margin);
> +
> + peci_sensor_mark_updated(&priv->temp.core[core_index].state);
> +
> +skip_update:
> + *val = priv->temp.core[core_index].value;
> + mutex_unlock(&priv->temp.core[core_index].state.lock);
> +
> + return 0;
> +
> +err_unlock:
> + mutex_unlock(&priv->temp.core[core_index].state.lock);
> + return ret;
Simplify:
skip_update:
*val = priv->temp.core[core_index].value;
err_unlock:
mutex_unlock(&priv->temp.core[core_index].state.lock);
return ret;
> +}
> +
> +static int cputemp_read_string(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, const char **str)
> +{
> + struct peci_cputemp *priv = dev_get_drvdata(dev);
> +
> + if (attr != hwmon_temp_label)
> + return -EOPNOTSUPP;
> +
> + *str = channel < channel_core ?
> + cputemp_label[channel] : priv->coretemp_label[channel - channel_core];
> +
> + return 0;
> +}
> +
> +static int cputemp_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct peci_cputemp *priv = dev_get_drvdata(dev);
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + switch (channel) {
> + case channel_die:
> + return get_die_temp(priv, val);
> + case channel_dts:
> + return get_dts(priv, val);
> + case channel_tcontrol:
> + return get_temp_target(priv, tcontrol_type, val);
> + case channel_tthrottle:
> + return get_temp_target(priv, tthrottle_type, val);
> + case channel_tjmax:
> + return get_temp_target(priv, tjmax_type, val);
> + default:
> + return get_core_temp(priv, channel - channel_core, val);
> + }
> + break;
> + case hwmon_temp_max:
> + return get_temp_target(priv, tcontrol_type, val);
> + case hwmon_temp_crit:
> + return get_temp_target(priv, tjmax_type, val);
> + case hwmon_temp_crit_hyst:
> + return get_temp_target(priv, crit_hyst_type, val);
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return 0;
> +}
> +
> +static umode_t cputemp_is_visible(const void *data, enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + const struct peci_cputemp *priv = data;
> +
> + if (channel > CPUTEMP_CHANNEL_NUMS)
> + return 0;
> +
> + if (channel < channel_core)
> + return 0444;
> +
> + if (test_bit(channel - channel_core, priv->core_mask))
> + return 0444;
> +
> + return 0;
> +}
> +
> +static int init_core_mask(struct peci_cputemp *priv)
> +{
> + struct peci_device *peci_dev = priv->peci_dev;
> + struct resolved_cores_reg *reg = priv->gen_info->reg;
> + u64 core_mask;
> + u32 data;
> + int ret;
> +
> + /* Get the RESOLVED_CORES register value */
> + switch (peci_dev->info.model) {
> + case INTEL_FAM6_ICELAKE_X:
> + case INTEL_FAM6_ICELAKE_D:
> + ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,
> + reg->func, reg->offset + 4, &data);
> + if (ret)
> + return ret;
> +
> + core_mask = (u64)data << 32;
> +
> + ret = peci_ep_pci_local_read(peci_dev, 0, reg->bus, reg->dev,
> + reg->func, reg->offset, &data);
> + if (ret)
> + return ret;
> +
> + core_mask |= data;
> +
> + break;
> + default:
> + ret = peci_pci_local_read(peci_dev, reg->bus, reg->dev,
> + reg->func, reg->offset, &data);
> + if (ret)
> + return ret;
> +
> + core_mask = data;
> +
> + break;
> + }
> +
> + if (!core_mask)
> + return -EIO;
> +
> + bitmap_from_u64(priv->core_mask, core_mask);
> +
> + return 0;
> +}
> +
> +static int create_temp_label(struct peci_cputemp *priv)
> +{
> + unsigned long core_max = find_last_bit(priv->core_mask, CORE_NUMS_MAX);
> + int i;
> +
> + priv->coretemp_label = devm_kzalloc(priv->dev, core_max * sizeof(char *), GFP_KERNEL);
> + if (!priv->coretemp_label)
> + return -ENOMEM;
> +
> + for_each_set_bit(i, priv->core_mask, CORE_NUMS_MAX) {
> + priv->coretemp_label[i] = devm_kasprintf(priv->dev, GFP_KERNEL, "Core %d", i);
> + if (!priv->coretemp_label[i])
> + return -ENOMEM;
> + }
> +
> + return 0;
> +}
> +
> +static void check_resolved_cores(struct peci_cputemp *priv)
> +{
> + /*
> + * Failure to resolve cores is non-critical, we're still able to
> + * provide other sensor data.
> + */
> +
> + if (init_core_mask(priv))
> + return;
> +
> + if (create_temp_label(priv))
> + bitmap_zero(priv->core_mask, CORE_NUMS_MAX);
> +}
> +
> +static void sensor_init(struct peci_cputemp *priv)
> +{
> + int i;
> +
> + mutex_init(&priv->temp.target.state.lock);
> + mutex_init(&priv->temp.die.state.lock);
> + mutex_init(&priv->temp.dts.state.lock);
> +
> + for_each_set_bit(i, priv->core_mask, CORE_NUMS_MAX)
> + mutex_init(&priv->temp.core[i].state.lock);
> +}
> +
> +static const struct hwmon_ops peci_cputemp_ops = {
> + .is_visible = cputemp_is_visible,
> + .read_string = cputemp_read_string,
> + .read = cputemp_read,
> +};
> +
> +static const u32 peci_cputemp_temp_channel_config[] = {
> + /* Die temperature */
> + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | HWMON_T_CRIT_HYST,
> + /* DTS margin */
> + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT | HWMON_T_CRIT_HYST,
> + /* Tcontrol temperature */
> + HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,
> + /* Tthrottle temperature */
> + HWMON_T_LABEL | HWMON_T_INPUT,
> + /* Tjmax temperature */
> + HWMON_T_LABEL | HWMON_T_INPUT,
> + /* Core temperature - for all core channels */
> + [channel_core ... CPUTEMP_CHANNEL_NUMS - 1] = HWMON_T_LABEL | HWMON_T_INPUT,
> + 0
> +};
> +
> +static const struct hwmon_channel_info peci_cputemp_temp_channel = {
> + .type = hwmon_temp,
> + .config = peci_cputemp_temp_channel_config,
> +};
> +
> +static const struct hwmon_channel_info *peci_cputemp_info[] = {
> + &peci_cputemp_temp_channel,
> + NULL
> +};
> +
> +static const struct hwmon_chip_info peci_cputemp_chip_info = {
> + .ops = &peci_cputemp_ops,
> + .info = peci_cputemp_info,
> +};
> +
> +static int peci_cputemp_probe(struct auxiliary_device *adev,
> + const struct auxiliary_device_id *id)
> +{
> + struct device *dev = &adev->dev;
> + struct peci_device *peci_dev = to_peci_device(dev->parent);
> + struct peci_cputemp *priv;
> + struct device *hwmon_dev;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->name = devm_kasprintf(dev, GFP_KERNEL, "peci_cputemp.cpu%d",
> + peci_dev->info.socket_id);
> + if (!priv->name)
> + return -ENOMEM;
> +
> + priv->dev = dev;
> + priv->peci_dev = peci_dev;
> + priv->gen_info = (const struct cpu_info *)id->driver_data;
> +
> + /*
> + * This is just a sanity check. Since we're using commands that are
> + * guaranteed to be supported on a given platform, we should never see
> + * revision lower than expected.
> + */
> + if (peci_dev->info.peci_revision < priv->gen_info->min_peci_revision)
> + dev_warn(priv->dev,
> + "Unexpected PECI revision %#x, some features may be unavailable\n",
> + peci_dev->info.peci_revision);
> +
> + check_resolved_cores(priv);
> +
> + sensor_init(priv);
> +
> + hwmon_dev = devm_hwmon_device_register_with_info(priv->dev, priv->name,
> + priv, &peci_cputemp_chip_info, NULL);
> +
> + return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +/*
> + * RESOLVED_CORES PCI configuration register may have different location on
> + * different platforms.
> + */
> +static struct resolved_cores_reg resolved_cores_reg_hsx = {
> + .bus = 1,
> + .dev = 30,
> + .func = 3,
> + .offset = 0xb4,
> +};
> +
> +static struct resolved_cores_reg resolved_cores_reg_icx = {
> + .bus = 14,
> + .dev = 30,
> + .func = 3,
> + .offset = 0xd0,
> +};
> +
> +static const struct cpu_info cpu_hsx = {
> + .reg = &resolved_cores_reg_hsx,
> + .min_peci_revision = 0x33,
> +};
> +
> +static const struct cpu_info cpu_icx = {
> + .reg = &resolved_cores_reg_icx,
> + .min_peci_revision = 0x40,
> +};
> +
> +static const struct auxiliary_device_id peci_cputemp_ids[] = {
> + {
> + .name = "peci_cpu.cputemp.hsx",
> + .driver_data = (kernel_ulong_t)&cpu_hsx,
> + },
> + {
> + .name = "peci_cpu.cputemp.bdx",
> + .driver_data = (kernel_ulong_t)&cpu_hsx,
> + },
> + {
> + .name = "peci_cpu.cputemp.bdxd",
> + .driver_data = (kernel_ulong_t)&cpu_hsx,
> + },
> + {
> + .name = "peci_cpu.cputemp.skx",
> + .driver_data = (kernel_ulong_t)&cpu_hsx,
> + },
> + {
> + .name = "peci_cpu.cputemp.icx",
> + .driver_data = (kernel_ulong_t)&cpu_icx,
> + },
> + {
> + .name = "peci_cpu.cputemp.icxd",
> + .driver_data = (kernel_ulong_t)&cpu_icx,
> + },
> + { }
> +};
> +MODULE_DEVICE_TABLE(auxiliary, peci_cputemp_ids);
> +
> +static struct auxiliary_driver peci_cputemp_driver = {
> + .probe = peci_cputemp_probe,
> + .id_table = peci_cputemp_ids,
> +};
> +
> +module_auxiliary_driver(peci_cputemp_driver);
> +
> +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>");
> +MODULE_AUTHOR("Iwona Winiarska <iwona.winiarska at intel.com>");
> +MODULE_DESCRIPTION("PECI cputemp driver");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS(PECI_CPU);
>
More information about the Linux-aspeed
mailing list