[PATCH 3/4] pwm: Add Aspeed ast2600 PWM support
Billy Tsai
billy_tsai at aspeedtech.com
Tue Apr 13 19:24:45 AEST 2021
Thanks for your review
Best Regards,
Billy Tsai
On 2021/4/12, 8:35 PM,Uwe Kleine-Königwrote:
Hello Billy,
On Mon, Apr 12, 2021 at 05:54:56PM +0800, Billy Tsai wrote:
>> This patch add the support of PWM controller which can find at aspeed
>> ast2600 soc chip. This controller supoorts up to 16 channels.
>>
>> Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
>> ---
>> drivers/pwm/pwm-aspeed-g6.c | 291 ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 291 insertions(+)
>> create mode 100644 drivers/pwm/pwm-aspeed-g6.c
>>
>> diff --git a/drivers/pwm/pwm-aspeed-g6.c b/drivers/pwm/pwm-aspeed-g6.c
>> new file mode 100644
>> index 000000000000..4bb4f97453c6
>> --- /dev/null
>> +++ b/drivers/pwm/pwm-aspeed-g6.c
>> @@ -0,0 +1,291 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (C) ASPEED Technology Inc.
> Don't you need to add a year here?
Got it.
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 or later as
>> + * published by the Free Software Foundation.
> Hmm, the comment and the SPDX-License-Identifier contradict each other.
> The idea of the latter is that the former isn't needed.
I will use "// SPDX-License-Identifier: GPL-2.0-or-later" for the license.
>> + */
> Is there documentation available in the internet for this hardware? If
> yes, please mention a link here.
Sorry we don't have the hardware document in the internet.
> Also describe the hardware here similar to how e.g.
> drivers/pwm/pwm-sifive.c does it. Please stick to the same format for
> easy grepping.
Got it.
>> +
>> +#include <linux/clk.h>
>> +#include <linux/errno.h>
>> +#include <linux/delay.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/module.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/sysfs.h>
>> +#include <linux/reset.h>
>> +#include <linux/regmap.h>
>> +#include <linux/pwm.h>
>> +/* The channel number of Aspeed pwm controller */
>> +#define ASPEED_NR_PWMS 16
>> +/* PWM Control Register */
>> +#define ASPEED_PWM_CTRL_CH(ch) ((ch * 0x10) + 0x00)
> #define ASPEED_PWM_CTRL_CH(ch) (((ch) * 0x10) + 0x00)
Got it.
>> +#define PWM_LOAD_SEL_AS_WDT BIT(19)
>> +#define LOAD_SEL_FALLING 0
>> +#define LOAD_SEL_RIGING 1
>> +#define PWM_DUTY_LOAD_AS_WDT_EN BIT(18)
>> +#define PWM_DUTY_SYNC_DIS BIT(17)
>> +#define PWM_CLK_ENABLE BIT(16)
>> +#define PWM_LEVEL_OUTPUT BIT(15)
>> +#define PWM_INVERSE BIT(14)
>> +#define PWM_OPEN_DRAIN_EN BIT(13)
>> +#define PWM_PIN_EN BIT(12)
>> +#define PWM_CLK_DIV_H_SHIFT 8
>> +#define PWM_CLK_DIV_H_MASK (0xf << PWM_CLK_DIV_H_SHIFT)
>> +#define PWM_CLK_DIV_L_SHIFT 0
>> +#define PWM_CLK_DIV_L_MASK (0xff << PWM_CLK_DIV_L_SHIFT)
>> +/* PWM Duty Cycle Register */
>> +#define ASPEED_PWM_DUTY_CYCLE_CH(ch) ((ch * 0x10) + 0x04)
>> +#define PWM_PERIOD_SHIFT (24)
>> +#define PWM_PERIOD_MASK (0xff << PWM_PERIOD_SHIFT)
>> +#define PWM_POINT_AS_WDT_SHIFT (16)
>> +#define PWM_POINT_AS_WDT_MASK (0xff << PWM_POINT_AS_WDT_SHIFT)
>> +#define PWM_FALLING_POINT_SHIFT (8)
>> +#define PWM_FALLING_POINT_MASK (0xffff << PWM_FALLING_POINT_SHIFT)
>> +#define PWM_RISING_POINT_SHIFT (0)
>> +#define PWM_RISING_POINT_MASK (0xffff << PWM_RISING_POINT_SHIFT)
>> +/* PWM default value */
>> +#define DEFAULT_PWM_PERIOD 0xff
>> +#define DEFAULT_TARGET_PWM_FREQ 25000
>> +#define DEFAULT_DUTY_PT 10
>> +#define DEFAULT_WDT_RELOAD_DUTY_PT 16
> You could spend a few empty lines to make this better readable. Also
> please use a consistent driver-specific prefix for your defines and
> consider using the macros from <linux/bitfield.h>. Also defines
> for bitfields should contain the register name.
Got it. I will use the bitfield method to write the hardware register.
>> +struct aspeed_pwm_data {
>> + struct pwm_chip chip;
>> + struct regmap *regmap;
>> + unsigned long clk_freq;
>> + struct reset_control *reset;
>> +};
>> +/**
>> + * struct aspeed_pwm - per-PWM driver data
>> + * @freq: cached pwm freq
>> + */
>> +struct aspeed_pwm {
>> + u32 freq;
>> +};
> This is actually unused, please drop it. (You save a value in it, but
> make never use of it.)
Got it.
>> +static void aspeed_set_pwm_channel_enable(struct regmap *regmap, u8 pwm_channel,
>> + bool enable)
>> +{
>> + regmap_update_bits(regmap, ASPEED_PWM_CTRL_CH(pwm_channel),
>> + (PWM_CLK_ENABLE | PWM_PIN_EN),
>> + enable ? (PWM_CLK_ENABLE | PWM_PIN_EN) : 0);
> What is the semantic of PIN_EN?
It means PIN_ENABLE. I will complete the defined name with PWM_PIN_ENABLE.
>> +}
>> +/*
>> + * The PWM frequency = HCLK(200Mhz) / (clock division L bit *
>> + * clock division H bit * (period bit + 1))
>> + */
>> +static void aspeed_set_pwm_freq(struct aspeed_pwm_data *priv,
>> + struct pwm_device *pwm, u32 freq)
>> +{
>> + u32 target_div, cal_freq;
>> + u32 tmp_div_h, tmp_div_l, diff, min_diff = INT_MAX;
>> + u32 div_h = BIT(5) - 1, div_l = BIT(8) - 1;
>> + u8 div_found;
>> + u32 index = pwm->hwpwm;
>> + struct aspeed_pwm *channel = pwm_get_chip_data(pwm);
>> +
>> + cal_freq = priv->clk_freq / (DEFAULT_PWM_PERIOD + 1);
>> + target_div = DIV_ROUND_UP(cal_freq, freq);
>> + div_found = 0;
>> + /* calculate for target frequence */
> s/frequence/frequency/
Got it.
>> + for (tmp_div_h = 0; tmp_div_h < 0x10; tmp_div_h++) {
>> + tmp_div_l = target_div / BIT(tmp_div_h) - 1;
>> +
>> + if (tmp_div_l < 0 || tmp_div_l >> 255)
>> + continue;
>> +
>> + diff = freq - cal_freq / (BIT(tmp_div_h) * (tmp_div_l + 1));
>> + if (abs(diff) < abs(min_diff)) {
>> + min_diff = diff;
>> + div_l = tmp_div_l;
>> + div_h = tmp_div_h;
>> + div_found = 1;
>> + if (diff == 0)
>> + break;
>> + }
>> + }
> If my understanding is right (i.e. H divides by a power of two and L by
> an integer) this can be simplified.
Yes, the formula of the frequency is:
HCLK / ((2 ** H divide) * L divide * PERIOD value)
I think the simplified way is using the bit shift, right?
>> + if (div_found == 0) {
>> + pr_debug("target freq: %d too slow set minimal frequency\n",
>> + freq);
>> + }
>> + channel->freq = cal_freq / (BIT(div_h) * (div_l + 1));
>> + pr_debug("div h %x, l : %x pwm out clk %d\n", div_h, div_l,
>> + channel->freq);
>> + pr_debug("hclk %ld, target pwm freq %d, real pwm freq %d\n",
>> + priv->clk_freq, freq, channel->freq);
>> +
>> + regmap_update_bits(priv->regmap, ASPEED_PWM_CTRL_CH(index),
>> + (PWM_CLK_DIV_H_MASK | PWM_CLK_DIV_L_MASK),
>> + (div_h << PWM_CLK_DIV_H_SHIFT) |
>> + (div_l << PWM_CLK_DIV_L_SHIFT));
>> +}
>> +
>> +static void aspeed_set_pwm_duty(struct aspeed_pwm_data *priv,
>> + struct pwm_device *pwm, u32 duty_pt)
>> +{
>> + u32 index = pwm->hwpwm;
>> +
>> + if (duty_pt == 0) {
>> + aspeed_set_pwm_channel_enable(priv->regmap, index, false);
>> + } else {
>> + regmap_update_bits(priv->regmap,
>> + ASPEED_PWM_DUTY_CYCLE_CH(index),
>> + PWM_FALLING_POINT_MASK,
>> + duty_pt << PWM_FALLING_POINT_SHIFT);
>> + aspeed_set_pwm_channel_enable(priv->regmap, index, true);
>> + }
>> +}
>> +
>> +static void aspeed_set_pwm_polarity(struct aspeed_pwm_data *priv,
>> + struct pwm_device *pwm, u8 polarity)
>> +{
>> + u32 index = pwm->hwpwm;
>> +
>> + regmap_update_bits(priv->regmap, ASPEED_PWM_CTRL_CH(index), PWM_INVERSE,
>> + (polarity) ? PWM_INVERSE : 0);
>> +}
>> +
>> +static int aspeed_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
>> +{
>> + struct device *dev = chip->dev;
>> + struct aspeed_pwm_data *priv = dev_get_drvdata(dev);
>> + struct aspeed_pwm *channel;
>> + u32 index = pwm->hwpwm;
>> + /*
>> + * Fixed the period to the max value and rising point to 0
>> + * for high resolution and simplified frequency calculation.
> s/^H//
Sorry, I don't understand this mean.
>> + */
>> + regmap_update_bits(priv->regmap, ASPEED_PWM_DUTY_CYCLE_CH(index),
>> + PWM_PERIOD_MASK,
>> + DEFAULT_PWM_PERIOD << PWM_PERIOD_SHIFT);
>> +
>> + regmap_update_bits(priv->regmap, ASPEED_PWM_DUTY_CYCLE_CH(index),
>> + PWM_RISING_POINT_MASK, 0);
> Only .apply is supposed to modify the PWM's configuration.
This is the initial value and the fixed(const) value for our pwm driver usage.
The value won't be modified, so I think I can initial it when pwm channel be requested.
>> + channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL);
>> + if (!channel)
>> + return -ENOMEM;
> Don't use devm_kzalloc if freeing isn't done at device cleanup time.
This doesn't depend on device, so I can use "kzalloc" to replace it?
>> + pwm_set_chip_data(pwm, channel);
>> +
>> + return 0;
>> +}
>> +
>> +static void aspeed_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
>> +{
>> + struct device *dev = chip->dev;
>> + struct aspeed_pwm *channel = pwm_get_chip_data(pwm);
>> +
>> + devm_kfree(dev, channel);
>> +}
When pwm free I need to use kfree to release the resources, right?
>> +
>> +static int aspeed_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>> + const struct pwm_state *state)
>> +{
>> + struct device *dev = chip->dev;
>> + struct aspeed_pwm_data *priv = dev_get_drvdata(dev);
>Please consider using
>
> priv = container_of(chip, struct aspeed_pwm_data, chip);
>
>(preferably wrapped in a macro) which is more type safe and more
>effective to calculate.
Got it.
>> + struct pwm_state *cur_state = &pwm->state;
>> + u32 freq = DIV_ROUND_UP_ULL(1000000000, state->period);
>> + u32 duty_pt = DIV_ROUND_UP_ULL(
>> + state->duty_cycle * (DEFAULT_PWM_PERIOD + 1), state->period);
> You're loosing precision here.
>> + dev_dbg(dev, "freq: %d, duty_pt: %d", freq, duty_pt);
>> + if (state->enabled) {
>> + aspeed_set_pwm_freq(priv, pwm, freq);
>> + aspeed_set_pwm_duty(priv, pwm, duty_pt);
>> + aspeed_set_pwm_polarity(priv, pwm, state->polarity);
> How does the hardware behave between these calls? E.g. can it happen
> that it already emits a normal period when inversed polarity is
> requested just before aspeed_set_pwm_polarity is called? Or there is a
> period with the previous duty cycle and the new period?
It will emits a normal period first and inversed the pwm duty instantly or wait one period
after aspeed_set_pwm_polarity is called depends on the bit PWM_DUTY_SYNC_DIS.
Does the pwm driver have expected behavior when apply polarity changed?
>> + } else {
>> + aspeed_set_pwm_duty(priv, pwm, 0);
>> + }
>> + cur_state->period = state->period;
>> + cur_state->duty_cycle = state->duty_cycle;
>> + cur_state->polarity = state->polarity;
>> + cur_state->enabled = state->enabled;
> The driver is not supposed to modify pwm->state.
Ok, I will remove it and use chip data to store it for .get_status api.
>> + return 0;
>> +}
> From your code I understood: The period of the signal is
>
> (PWM_PERIOD + 1) * (2 ** DIV_H) * (DIV_L + 1) / 200 MHz
> . The duty cycle is
>
> PWM_FALLING_POINT * (2 ** DIV_H) * (DIV_L + 1) / 200 MHz
> . So the PWM cannot provide a 100% relative duty cycle.
> Is this right?
No, If you want to set 100% duty cycle you can set the PWM_FALLING_POINT value
to same as PWM_RISING_POINT (we fixed it to 0).
>> +static const struct pwm_ops aspeed_pwm_ops = {
>> + .request = aspeed_pwm_request,
>> + .free = aspeed_pwm_free,
>> + .apply = aspeed_pwm_apply,
> Please test your driver with PWM_DEBUG enabled.
Got it.
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +static int aspeed_pwm_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct clk *clk;
>> + int ret;
>> + struct aspeed_pwm_data *priv;
>> + struct device_node *np;
>> +
>> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv)
>> + return -ENOMEM;
>> +
>> + np = pdev->dev.parent->of_node;
>> + if (!of_device_is_compatible(np, "aspeed,ast2600-pwm-tach")) {
>> + dev_err(dev, "unsupported pwm device binding\n");
>> + return -ENODEV;
>> + }
> Is this pwm-tach an mfd?
Yes, It is an mfd.
>> + priv->regmap = syscon_node_to_regmap(np);
>> + if (IS_ERR(priv->regmap)) {
>> + dev_err(dev, "Couldn't get regmap\n");
>> + return -ENODEV;
>> + }
>> +
>> + clk = devm_clk_get(dev, NULL);
>> + if (IS_ERR(clk))
>> + return -ENODEV;
>> + priv->clk_freq = clk_get_rate(clk);
> If you intend to use this clock, you have to enable it.
Got it.
>> + priv->reset = reset_control_get_shared(&pdev->dev, NULL);
>> + if (IS_ERR(priv->reset)) {
>> + dev_err(&pdev->dev, "can't get aspeed_pwm_tacho reset\n");
>> + return PTR_ERR(priv->reset);
>> + }
>> + reset_control_deassert(priv->reset);
> missing error checking
Got it.
>> + priv->chip.dev = dev;
>> + priv->chip.ops = &aspeed_pwm_ops;
>> + priv->chip.base = -1;
> This isn't necessary since f9a8ee8c8bcd118e800d88772c6457381db45224,
> please drop the assignment to base.
Got it.
>> + priv->chip.npwm = ASPEED_NR_PWMS;
>> + priv->chip.of_xlate = of_pwm_xlate_with_flags;
>> + priv->chip.of_pwm_n_cells = 3;
>> +
>> + ret = pwmchip_add(&priv->chip);
>> + if (ret < 0) {
>> + dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
> Please use %pe to make the error messages better readable.
Got it.
>> + return ret;
>> + }
>> + dev_set_drvdata(dev, priv);
>> + return ret;
>> +}
>> +
>> +static const struct of_device_id of_pwm_match_table[] = {
>> + {
>> + .compatible = "aspeed,ast2600-pwm",
>> + },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, of_pwm_match_table);
>> +
>> +static struct platform_driver aspeed_pwm_driver = {
>> + .probe = aspeed_pwm_probe,
> Please implement a .remove callback.
Got it.
>> + .driver = {
>> + .name = "aspeed_pwm",
>> + .of_match_table = of_pwm_match_table,
>> + },
>> +};
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | https://www.pengutronix.de/ |
More information about the Linux-aspeed
mailing list