[PATCH 3/3] ARM: dts: aspeed: Add silicon id node
Andrew Jeffery
andrew at aj.id.au
Thu Sep 17 09:52:10 AEST 2020
On Wed, 16 Sep 2020, at 18:17, Joel Stanley wrote:
> This register describes the silicon id and chip unique id. It varies
> between CPU revisions, but is always part of the SCU.
>
> Signed-off-by: Joel Stanley <joel at jms.id.au>
> ---
> arch/arm/boot/dts/aspeed-g4.dtsi | 5 +++++
> arch/arm/boot/dts/aspeed-g5.dtsi | 5 +++++
> arch/arm/boot/dts/aspeed-g6.dtsi | 5 +++++
> 3 files changed, 15 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
> index 82f0213e3a3c..bc580b75f801 100644
> --- a/arch/arm/boot/dts/aspeed-g4.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g4.dtsi
> @@ -192,6 +192,11 @@ p2a: p2a-control at 2c {
> status = "disabled";
> };
>
> + silicon-id at 7c {
> + compatible =
> "aspeed,ast2400-silicon-id", "aspeed,silicon-id";
> + reg = <0x7c 0x4>;
Looks like a whitespace/alignment issue here.
> + };
> +
> pinctrl: pinctrl at 80 {
> reg = <0x80 0x18>, <0xa0 0x10>;
> compatible = "aspeed,ast2400-pinctrl";
> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi
> b/arch/arm/boot/dts/aspeed-g5.dtsi
> index 9c91afb2b404..c6862182313a 100644
> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
> @@ -239,6 +239,11 @@ p2a: p2a-control at 2c {
> status = "disabled";
> };
>
> + silicon-id at 7c {
> + compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
> + reg = <0x7c 0x4 0x150 0x8>;
I think `reg = <0x7c 0x4>, <0x150 0x8>;` can be used here? I think it's a
readability improvement, but I'm not fussed. If you decide to change it
then also fix the g6 devicetree.
Andrew
> + };
> +
> pinctrl: pinctrl at 80 {
> compatible = "aspeed,ast2500-pinctrl";
> reg = <0x80 0x18>, <0xa0 0x10>;
> diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
> index b58220a49cbd..1ce3a1f06f7f 100644
> --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> @@ -311,6 +311,11 @@ pinctrl: pinctrl {
> compatible = "aspeed,ast2600-pinctrl";
> };
>
> + silicon-id at 14 {
> + compatible = "aspeed,ast2600-silicon-id", "aspeed,silicon-id";
> + reg = <0x14 0x4 0x5b0 0x8>;
> + };
> +
> smp-memram at 180 {
> compatible = "aspeed,ast2600-smpmem";
> reg = <0x180 0x40>;
> --
> 2.28.0
>
>
More information about the Linux-aspeed
mailing list