[PATCH v2 4/5] ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel I2C device

[Joel Stanley]

On Tue, 8 Sep 2020 at 20:01, Eddie James <eajames at linux.ibm.com> wrote:
>
> Set I2C bus 0 to multi-master mode and add the panel device that will
> register as a slave.
>
> Signed-off-by: Eddie James <eajames at linux.ibm.com>
> Reviewed-by: Joel Stanley <joel at jms.id.au>

I will take this and the rainier dts patch through the aspeed tree so
we don't get conflicts.

Eddie, when you send v3, you can omit them.

Cheers,

Joel

> ---
>  arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> index 5f4ee67ac787..4d070d6ba09f 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> @@ -4,6 +4,7 @@
>
>  #include "aspeed-g6.dtsi"
>  #include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
>  #include <dt-bindings/leds/leds-pca955x.h>
>
>  / {
> @@ -438,7 +439,13 @@ aliases {
>  };
>
>  &i2c0 {
> +       multi-master;
>         status = "okay";
> +
> +       ibm-panel at 62 {
> +               compatible = "ibm,op-panel";
> +               reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
> +       };
>  };
>
>  &i2c1 {
> --
> 2.26.2
>