[PATCH v2 2/2] mmc: host: Enable compile testing of multiple drivers

Ulf Hansson ulf.hansson at linaro.org
Mon Sep 7 20:07:30 AEST 2020


On Fri, 4 Sep 2020 at 18:43, Krzysztof Kozlowski <krzk at kernel.org> wrote:
>
> Multiple MMC host controller driver can be compile tested as they do not
> depend on architecture specific headers.
>
> Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>

I tried to apply this, but there was a conflict around the SDHCI_S3C.
Can you please rebase.

Kind regards
Uffe


>
> ---
>
> Changes since v1:
> 1. Add COMMON_CLK dependency to MESON_GX to fix errors like:
>    ERROR: modpost: "devm_clk_register" [drivers/mmc/host/meson-gx-mmc.ko] undefined!
> ---
>  drivers/mmc/host/Kconfig | 41 +++++++++++++++++++++-------------------
>  1 file changed, 22 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index eea01fde0591..93db789cf8ec 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -178,7 +178,7 @@ config MMC_SDHCI_OF_AT91
>  config MMC_SDHCI_OF_ESDHC
>         tristate "SDHCI OF support for the Freescale eSDHC controller"
>         depends on MMC_SDHCI_PLTFM
> -       depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE
> +       depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST
>         select MMC_SDHCI_IO_ACCESSORS
>         select FSL_GUTS
>         help
> @@ -216,7 +216,7 @@ config MMC_SDHCI_OF_DWCMSHC
>  config MMC_SDHCI_OF_SPARX5
>         tristate "SDHCI OF support for the MCHP Sparx5 SoC"
>         depends on MMC_SDHCI_PLTFM
> -       depends on ARCH_SPARX5
> +       depends on ARCH_SPARX5 || COMPILE_TEST
>         help
>           This selects the Secure Digital Host Controller Interface (SDHCI)
>           found in the MCHP Sparx5 SoC.
> @@ -238,7 +238,7 @@ config MMC_SDHCI_CADENCE
>
>  config MMC_SDHCI_CNS3XXX
>         tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
> -       depends on ARCH_CNS3XXX
> +       depends on ARCH_CNS3XXX || COMPILE_TEST
>         depends on MMC_SDHCI_PLTFM
>         help
>           This selects the SDHCI support for CNS3xxx System-on-Chip devices.
> @@ -262,7 +262,7 @@ config MMC_SDHCI_ESDHC_MCF
>
>  config MMC_SDHCI_ESDHC_IMX
>         tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
> -       depends on ARCH_MXC
> +       depends on ARCH_MXC || COMPILE_TEST
>         depends on MMC_SDHCI_PLTFM
>         select MMC_SDHCI_IO_ACCESSORS
>         select MMC_CQHCI
> @@ -276,7 +276,7 @@ config MMC_SDHCI_ESDHC_IMX
>
>  config MMC_SDHCI_DOVE
>         tristate "SDHCI support on Marvell's Dove SoC"
> -       depends on ARCH_DOVE || MACH_DOVE
> +       depends on ARCH_DOVE || MACH_DOVE || COMPILE_TEST
>         depends on MMC_SDHCI_PLTFM
>         select MMC_SDHCI_IO_ACCESSORS
>         help
> @@ -289,7 +289,7 @@ config MMC_SDHCI_DOVE
>
>  config MMC_SDHCI_TEGRA
>         tristate "SDHCI platform support for the Tegra SD/MMC Controller"
> -       depends on ARCH_TEGRA
> +       depends on ARCH_TEGRA || COMPILE_TEST
>         depends on MMC_SDHCI_PLTFM
>         select MMC_SDHCI_IO_ACCESSORS
>         select MMC_CQHCI
> @@ -301,7 +301,8 @@ config MMC_SDHCI_TEGRA
>
>  config MMC_SDHCI_S3C
>         tristate "SDHCI support on Samsung S3C SoC"
> -       depends on MMC_SDHCI && (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS)
> +       depends on MMC_SDHCI
> +       depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
>         help
>           This selects the Secure Digital Host Controller Interface (SDHCI)
>           often referrered to as the HSMMC block in some of the Samsung S3C
> @@ -313,7 +314,7 @@ config MMC_SDHCI_S3C
>
>  config MMC_SDHCI_SIRF
>         tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
> -       depends on ARCH_SIRF
> +       depends on ARCH_SIRF || COMPILE_TEST
>         depends on MMC_SDHCI_PLTFM
>         select MMC_SDHCI_IO_ACCESSORS
>         help
> @@ -351,7 +352,8 @@ config MMC_SDHCI_PXAV2
>
>  config MMC_SDHCI_SPEAR
>         tristate "SDHCI support on ST SPEAr platform"
> -       depends on MMC_SDHCI && PLAT_SPEAR
> +       depends on MMC_SDHCI
> +       depends on PLAT_SPEAR || COMPILE_TEST
>         depends on OF
>         help
>           This selects the Secure Digital Host Controller Interface (SDHCI)
> @@ -374,7 +376,7 @@ config MMC_SDHCI_S3C_DMA
>
>  config MMC_SDHCI_BCM_KONA
>         tristate "SDHCI support on Broadcom KONA platform"
> -       depends on ARCH_BCM_MOBILE
> +       depends on ARCH_BCM_MOBILE || COMPILE_TEST
>         depends on MMC_SDHCI_PLTFM
>         help
>           This selects the Broadcom Kona Secure Digital Host Controller
> @@ -422,7 +424,8 @@ config MMC_SDHCI_IPROC
>
>  config MMC_MESON_GX
>         tristate "Amlogic S905/GX*/AXG SD/MMC Host Controller support"
> -       depends on ARCH_MESON
> +       depends on ARCH_MESON || COMPILE_TEST
> +       depends on COMMON_CLK
>         help
>           This selects support for the Amlogic SD/MMC Host Controller
>           found on the S905/GX*/AXG family of SoCs.  This controller is
> @@ -458,7 +461,7 @@ config MMC_MESON_MX_SDIO
>
>  config MMC_MOXART
>         tristate "MOXART SD/MMC Host Controller support"
> -       depends on ARCH_MOXART
> +       depends on ARCH_MOXART || COMPILE_TEST
>         help
>           This selects support for the MOXART SD/MMC Host Controller.
>           MOXA provides one multi-functional card reader which can
> @@ -467,7 +470,7 @@ config MMC_MOXART
>
>  config MMC_SDHCI_ST
>         tristate "SDHCI support on STMicroelectronics SoC"
> -       depends on ARCH_STI || FSP2
> +       depends on ARCH_STI || FSP2 || COMPILE_TEST
>         depends on MMC_SDHCI_PLTFM
>         select MMC_SDHCI_IO_ACCESSORS
>         help
> @@ -587,7 +590,7 @@ config MMC_TIFM_SD
>
>  config MMC_MVSDIO
>         tristate "Marvell MMC/SD/SDIO host driver"
> -       depends on PLAT_ORION
> +       depends on PLAT_ORION || (COMPILE_TEST && ARM)
>         depends on OF
>         help
>           This selects the Marvell SDIO host driver.
> @@ -599,7 +602,7 @@ config MMC_MVSDIO
>
>  config MMC_DAVINCI
>         tristate "TI DAVINCI Multimedia Card Interface support"
> -       depends on ARCH_DAVINCI
> +       depends on ARCH_DAVINCI || COMPILE_TEST
>         help
>           This selects the TI DAVINCI Multimedia card Interface.
>           If you have an DAVINCI board with a Multimedia Card slot,
> @@ -628,7 +631,7 @@ config MMC_SPI
>
>  config MMC_S3C
>         tristate "Samsung S3C SD/MMC Card Interface support"
> -       depends on ARCH_S3C24XX
> +       depends on ARCH_S3C24XX || COMPILE_TEST
>         depends on S3C24XX_DMAC
>         help
>           This selects a driver for the MCI interface found in
> @@ -681,7 +684,7 @@ config MMC_SDRICOH_CS
>
>  config MMC_SDHCI_SPRD
>         tristate "Spreadtrum SDIO host Controller"
> -       depends on ARCH_SPRD
> +       depends on ARCH_SPRD || COMPILE_TEST
>         depends on MMC_SDHCI_PLTFM
>         select MMC_SDHCI_IO_ACCESSORS
>         select MMC_HSQ
> @@ -698,7 +701,7 @@ config MMC_TMIO_CORE
>
>  config MMC_TMIO
>         tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
> -       depends on MFD_TMIO || MFD_ASIC3
> +       depends on MFD_TMIO || MFD_ASIC3 || COMPILE_TEST
>         select MMC_TMIO_CORE
>         help
>           This provides support for the SD/MMC cell found in TC6393XB,
> @@ -971,7 +974,7 @@ config MMC_REALTEK_USB
>
>  config MMC_SUNXI
>         tristate "Allwinner sunxi SD/MMC Host Controller support"
> -       depends on ARCH_SUNXI
> +       depends on ARCH_SUNXI || COMPILE_TEST
>         help
>           This selects support for the SD/MMC Host Controller on
>           Allwinner sunxi SoCs.
> --
> 2.17.1
>


More information about the Linux-aspeed mailing list