[PATCH 3/3] iio: adc: aspeed: Setting ref_voltage in probe

[Rob Herring]

On Tue, Oct 13, 2020 at 06:32:45PM +0800, Billy Tsai wrote:
> At ast2600 ref_voltage becomes configurable and this property is board
> dependency.
> 
> Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
> ---
>  .../devicetree/bindings/iio/adc/aspeed_adc.txt   | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
> index 034fc2ba100e..0ba1980c4e06 100644
> --- a/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/aspeed_adc.txt
> @@ -3,8 +3,11 @@ Aspeed ADC
>  This device is a 10-bit converter for 16 voltage channels.  All inputs are
>  single ended.
>  
> +At ast2600, this device split into two individual IPs and each contains 8 voltage channels.
> +
> +Chip level dtsi:
>  Required properties:
> -- compatible: Should be "aspeed,ast2400-adc" or "aspeed,ast2500-adc"
> +- compatible: Should be "aspeed,ast2400-adc" or "aspeed,ast2500-adc" or "aspeed,ast2600-adc"
>  - reg: memory window mapping address and length
>  - clocks: Input clock used to derive the sample clock. Expected to be the
>            SoC's APB clock.
> @@ -20,3 +23,14 @@ Example:
>  		resets = <&syscon ASPEED_RESET_ADC>;
>  		#io-channel-cells = <1>;
>  	};
> +
> +Board level dts:

This split is convention, but not relevant to the binding.

> +Required properties:
> +- ref_voltage: (ast2600 only)

s/_/-/

And needs a vendor prefix.

> +	- Reference voltage in millivolts for the conversions.
> +	- The range of value is 900 to 2700 mv.
> +
> +Example:
> +&adc0 {
> +	ref_voltage = <2500>;
> +};
> \ No newline at end of file

Fix this.

> -- 
> 2.17.1
>