[RESEND PATCH] ARM: dts: aspeed-g6: Fix gpio memory region

[Ryan Chen]

> -----Original Message-----
> From: Andrew Jeffery <andrew at aj.id.au>
> Sent: Thursday, October 1, 2020 8:32 AM
> To: Billy Tsai <billy_tsai at aspeedtech.com>; Rob Herring <robh+dt at kernel.org>;
> Joel Stanley <joel at jms.id.au>; devicetree at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; linux-aspeed at lists.ozlabs.org;
> linux-kernel at vger.kernel.org; Ryan Chen <ryan_chen at aspeedtech.com>
> Cc: BMC-SW <BMC-SW at aspeedtech.com>
> Subject: Re: [RESEND PATCH] ARM: dts: aspeed-g6: Fix gpio memory region
> 
> 
> 
> On Thu, 1 Oct 2020, at 09:42, Andrew Jeffery wrote:
> > Hi Billy,
> >
> > On Wed, 30 Sep 2020, at 18:36, Billy Tsai wrote:
> > > Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
> > > ---
> > >  arch/arm/boot/dts/aspeed-g6.dtsi | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi
> > > b/arch/arm/boot/dts/aspeed-g6.dtsi
> > > index 97ca743363d7..b9ec8b579f73 100644
> > > --- a/arch/arm/boot/dts/aspeed-g6.dtsi
> > > +++ b/arch/arm/boot/dts/aspeed-g6.dtsi
> > > @@ -357,7 +357,7 @@
> > >  				#gpio-cells = <2>;
> > >  				gpio-controller;
> > >  				compatible = "aspeed,ast2600-gpio";
> > > -				reg = <0x1e780000 0x800>;
> > > +				reg = <0x1e780000 0x500>;
> >
> > We took the 0x800 value from the memory space layout table in the
> > datasheet for the 2600. Should that be updated too? Or are you just
> > limiting the region to the registers currently described rather than the
> allocated address space?
> 
> Ah, actually, I see what's going on. We really have this layout (taking some
> liberties):
> 
> 0x1e785000 - 0x1e785500: PGPIO 3.3V
> 0x1e785500 - 0x1e785600: SGPM1
> 0x1e785600 - 0x1e785700: SGPM2
> 0x1e785700 - 0x1e785740: SPGS1
> 0x1e785740 - 0x1e785780: SPGS2
> 0x1e785800 - 0x1e786000: PGPIO 1.8V
> 
> Ryan: Can you change the address space layout table to reflect this? That way it
> still functions as a quick - but accurate - reference.

Yes will resend the patch for update the table. 
0x1e780000 ~ 0x1e780400 PGPIO 3.3V
0x1e780500 - 0x1e780600: SGPM1
0x1e780600 - 0x1e780700: SGPM2
0x1e780700 - 0x1e780740: SPGS1
0x1e780740 - 0x1e780780: SPGS2
0x1e780800 - 0x1e781000: PGPIO 1.8V