Re: [PATCH 6/6] ARM: dts: aspeed: rainier: Add leds that are on optional PCI cable cards
Andrew Jeffery
andrew at aj.id.au
Mon Nov 30 17:08:17 AEDT 2020
On Mon, 16 Nov 2020, at 16:43, Joel Stanley wrote:
> On Fri, 13 Nov 2020 at 05:59, Vishwanatha Subbanna
> <vishwa at linux.vnet.ibm.com> wrote:
> >
> > These are LEDs on the cable cards that plug into PCIE slots.
> > The LEDs are controlled by PCA9552 I2C expander
> >
> > Signed-off-by: Vishwanatha Subbanna <vishwa at linux.vnet.ibm.com>
> > ---
> > arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 288 +++++++++++++++++++++++++++
> > 1 file changed, 288 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> > index 67c8c40..7de5f76 100644
> > --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> > +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> > @@ -696,6 +696,70 @@
> > gpios = <&pca4 7 GPIO_ACTIVE_LOW>;
> > };
> > };
> > +
> > + leds-optional-cablecard0 {
>
> Is it necessary to have separate nodes for each of the different GPIO devices?
Good question. Vishwa, what's the advantage either way here?
>
> Would it make sense to combine them, or is it better to be separate?
>
> Andrew, Eddie, Brad: please review this one before I merge it.
>
> > + compatible = "gpio-leds";
> > +
> > + cablecard0-cxp-top {
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + gpios = <&pca5 0 GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + cablecard0-cxp-bot {
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + gpios = <&pca5 1 GPIO_ACTIVE_LOW>;
> > + };
> > + };
> > +
> > + leds-optional-cablecard3 {
> > + compatible = "gpio-leds";
> > +
> > + cablecard3-cxp-top {
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + gpios = <&pca6 0 GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + cablecard3-cxp-bot {
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + gpios = <&pca6 1 GPIO_ACTIVE_LOW>;
> > + };
> > + };
> > +
> > + leds-optional-cablecard4 {
> > + compatible = "gpio-leds";
> > +
> > + cablecard4-cxp-top {
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + gpios = <&pca7 0 GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + cablecard4-cxp-bot {
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + gpios = <&pca7 1 GPIO_ACTIVE_LOW>;
> > + };
> > + };
> > +
> > + leds-optional-cablecard10 {
> > + compatible = "gpio-leds";
> > +
> > + cablecard10-cxp-top {
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + gpios = <&pca8 0 GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + cablecard10-cxp-bot {
> > + retain-state-shutdown;
> > + default-state = "keep";
> > + gpios = <&pca8 1 GPIO_ACTIVE_LOW>;
> > + };
> > + };
> > };
> >
> > &ehci1 {
> > @@ -1212,6 +1276,180 @@
> > compatible = "atmel,24c64";
> > reg = <0x52>;
> > };
> > +
> > + pca5: pca9551 at 60 {
> > + compatible = "nxp,pca9551";
> > + reg = <0x60>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio at 0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +};
> > +
> > +&i2c5 {
> > + status = "okay";
> > +
> > + tmp275 at 48 {
> > + compatible = "ti,tmp275";
> > + reg = <0x48>;
> > + };
> > +
> > + tmp275 at 49 {
> > + compatible = "ti,tmp275";
> > + reg = <0x49>;
> > + };
These aren't LED devices.
> > +
> > + eeprom at 50 {
> > + compatible = "atmel,24c64";
> > + reg = <0x50>;
> > + };
> > +
> > + eeprom at 51 {
> > + compatible = "atmel,24c64";
> > + reg = <0x51>;
> > + };
Neither are these.
> > +
> > + pca6: pca9551 at 60 {
> > + compatible = "nxp,pca9551";
> > + reg = <0x60>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio at 0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > +
> > + pca7: pca9551 at 61 {
> > + compatible = "nxp,pca9551";
> > + reg = <0x61>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio at 0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > };
> >
> > &i2c5 {
> > @@ -2028,6 +2266,56 @@
> > compatible = "atmel,24c64";
> > reg = <0x51>;
> > };
> > +
> > + pca8: pca9551 at 60 {
> > + compatible = "nxp,pca9551";
> > + reg = <0x60>;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + gpio at 0 {
> > + reg = <0>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 1 {
> > + reg = <1>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 2 {
> > + reg = <2>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 3 {
> > + reg = <3>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 4 {
> > + reg = <4>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 5 {
> > + reg = <5>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 6 {
> > + reg = <6>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > +
> > + gpio at 7 {
> > + reg = <7>;
> > + type = <PCA955X_TYPE_GPIO>;
> > + };
> > + };
> > };
If we're adding LEDs, why aren't we using PCA955X_TYPE_LED? Why the indirection through the leds-gpio driver?
Andrew
More information about the Linux-aspeed
mailing list