[PATCH] ARM: dts: aspeed: amd-ethanolx: Add GPIO line names

[Joel Stanley]

On Wed, 11 Nov 2020 at 22:44, Supreeth Venkatesh
<supreeth.venkatesh at amd.com> wrote:
>
>
>
> On 11/11/20 7:21 AM, Konstantin Aladyshev wrote:
> > [CAUTION: External Email]
> >
> > Add GPIO line names for AMD EthanolX customer reference board.
> > It populates AST2500 GPIO lines (A0-A7 to AC0-AC7) with AMD EthanolX
> > designated names.
> >
> > Signed-off-by: Konstantin Aladyshev <aladyshev22 at gmail.com>
> Reviewed-by: Supreeth Venkatesh <supreeth.venkatesh at amd.com>

Applied to dt-for-v5.11.

Thanks,

Joel

> > ---
> >  arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 44 +++++++++++++++++++
> >  1 file changed, 44 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
> > index b93ed44eba0c..96ff0aea64e5 100644
> > --- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
> > +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
> > @@ -97,6 +97,50 @@
> >                      &pinctrl_adc4_default>;
> >  };
> >
> > +&gpio {
> > +       status = "okay";
> > +       gpio-line-names =
> > +       /*A0-A7*/       "","","FAULT_LED","CHASSIS_ID_LED","","","","",
> > +       /*B0-B7*/       "","","","","","","","",
> > +       /*C0-C7*/       "CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","",
> > +       /*D0-D7*/       "HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S",
> > +                       "JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD",
> > +       /*E0-E7*/       "","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN",
> > +                       "MON_P0_PWR_GOOD","MON_PWROK","MON_RESET",
> > +       /*F0-F7*/       "MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP",
> > +                       "MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","",
> > +       /*G0-G7*/       "BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0",
> > +                       "P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","",
> > +       /*H0-H7*/       "BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3",
> > +                       "PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1",
> > +       /*I0-I7*/       "","","","","","","","",
> > +       /*J0-J7*/       "","","","","","","","",
> > +       /*K0-K7*/       "","","","","","","","",
> > +       /*L0-L7*/       "","","","","","","","",
> > +       /*M0-M7*/       "ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN",
> > +                       "ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT",
> > +                       "ASSERT_CLR_CMOS","ASSERT_BMC_READY",
> > +       /*N0-N7*/       "","","","","","","","",
> > +       /*O0-O7*/       "","","","","","","","",
> > +       /*P0-P7*/       "P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT",
> > +                       "P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT",
> > +                       "P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT",
> > +                       "P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT",
> > +       /*Q0-Q7*/       "","","","","","","","",
> > +       /*R0-R7*/       "","","","","","","","",
> > +       /*S0-S7*/       "","","","","","","","",
> > +       /*T0-T7*/       "","","","","","","","",
> > +       /*U0-U7*/       "","","","","","","","",
> > +       /*V0-V7*/       "","","","","","","","",
> > +       /*W0-W7*/       "","","","","","","","",
> > +       /*X0-X7*/       "","","","","","","","",
> > +       /*Y0-Y7*/       "","","","","","","","",
> > +       /*Z0-Z7*/       "","","","","","","","",
> > +       /*AA0-AA7*/     "","SENSOR THERM","","","","","","",
> > +       /*AB0-AB7*/     "","","","","","","","",
> > +       /*AC0-AC7*/     "","","","","","","","";
> > +};
> > +
> >  //APML for P0
> >  &i2c0 {
> >         status = "okay";
> > --
> > 2.17.1
> >