[PATCH v11 3/8] soc: aspeed: xdma: Add user interface
Eddie James
eajames at linux.ibm.com
Wed May 6 02:58:20 AEST 2020
This commits adds a miscdevice to provide a user interface to the XDMA
engine. The interface provides the write operation to start DMA
operations. The DMA parameters are passed as the data to the write call.
The actual data to transfer is NOT passed through write. Note that both
directions of DMA operation are accomplished through the write command;
BMC to host and host to BMC.
The XDMA driver reserves an area of physical memory for DMA operations,
as the XDMA engine is restricted to accessing certain physical memory
areas on some platforms. This memory forms a pool from which users can
allocate pages for their usage with calls to mmap. The space allocated
by a client will be the space used in the DMA operation. For an
"upstream" (BMC to host) operation, the data in the client's area will
be transferred to the host. For a "downstream" (host to BMC) operation,
the host data will be placed in the client's memory area.
Poll is also provided in order to determine when the DMA operation is
complete for non-blocking IO.
Signed-off-by: Eddie James <eajames at linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew at aj.id.au>
---
drivers/soc/aspeed/aspeed-xdma.c | 218 +++++++++++++++++++++++++++++++++++++++
1 file changed, 218 insertions(+)
diff --git a/drivers/soc/aspeed/aspeed-xdma.c b/drivers/soc/aspeed/aspeed-xdma.c
index da78149..b4d4d34 100644
--- a/drivers/soc/aspeed/aspeed-xdma.c
+++ b/drivers/soc/aspeed/aspeed-xdma.c
@@ -13,6 +13,7 @@
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/mfd/syscon.h>
+#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of_device.h>
@@ -235,6 +236,8 @@ struct aspeed_xdma {
dma_addr_t mem_coherent;
dma_addr_t cmdq_phys;
struct gen_pool *pool;
+
+ struct miscdevice misc;
};
struct aspeed_xdma_client {
@@ -553,6 +556,211 @@ static irqreturn_t aspeed_xdma_pcie_irq(int irq, void *arg)
return IRQ_HANDLED;
}
+static ssize_t aspeed_xdma_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *offset)
+{
+ int rc;
+ unsigned int num_cmds;
+ struct aspeed_xdma_op op;
+ struct aspeed_xdma_cmd cmds[2];
+ struct aspeed_xdma_client *client = file->private_data;
+ struct aspeed_xdma *ctx = client->ctx;
+
+ if (len != sizeof(op))
+ return -EINVAL;
+
+ rc = copy_from_user(&op, buf, len);
+ if (rc)
+ return rc;
+
+ if (!op.len || op.len > client->size ||
+ op.direction > ASPEED_XDMA_DIRECTION_UPSTREAM)
+ return -EINVAL;
+
+ num_cmds = ctx->chip->set_cmd(ctx, cmds, &op, client->phys);
+ do {
+ rc = aspeed_xdma_start(ctx, num_cmds, cmds, !!op.direction,
+ client);
+ if (!rc)
+ break;
+
+ if ((file->f_flags & O_NONBLOCK) || rc != -EBUSY)
+ return rc;
+
+ rc = wait_event_interruptible(ctx->wait,
+ !(ctx->current_client ||
+ ctx->in_reset));
+ } while (!rc);
+
+ if (rc)
+ return -EINTR;
+
+ if (!(file->f_flags & O_NONBLOCK)) {
+ rc = wait_event_interruptible(ctx->wait, !client->in_progress);
+ if (rc)
+ return -EINTR;
+
+ if (client->error)
+ return -EIO;
+ }
+
+ return len;
+}
+
+static __poll_t aspeed_xdma_poll(struct file *file,
+ struct poll_table_struct *wait)
+{
+ __poll_t mask = 0;
+ __poll_t req = poll_requested_events(wait);
+ struct aspeed_xdma_client *client = file->private_data;
+ struct aspeed_xdma *ctx = client->ctx;
+
+ if (req & (EPOLLIN | EPOLLRDNORM)) {
+ if (READ_ONCE(client->in_progress))
+ poll_wait(file, &ctx->wait, wait);
+
+ if (!READ_ONCE(client->in_progress)) {
+ if (READ_ONCE(client->error))
+ mask |= EPOLLERR;
+ else
+ mask |= EPOLLIN | EPOLLRDNORM;
+ }
+ }
+
+ if (req & (EPOLLOUT | EPOLLWRNORM)) {
+ if (READ_ONCE(ctx->current_client))
+ poll_wait(file, &ctx->wait, wait);
+
+ if (!READ_ONCE(ctx->current_client))
+ mask |= EPOLLOUT | EPOLLWRNORM;
+ }
+
+ return mask;
+}
+
+static void aspeed_xdma_vma_close(struct vm_area_struct *vma)
+{
+ int rc;
+ struct aspeed_xdma_client *client = vma->vm_private_data;
+
+ rc = wait_event_interruptible(client->ctx->wait, !client->in_progress);
+ if (rc)
+ return;
+
+ gen_pool_free(client->ctx->pool, (unsigned long)client->virt,
+ client->size);
+
+ client->virt = NULL;
+ client->phys = 0;
+ client->size = 0;
+}
+
+static const struct vm_operations_struct aspeed_xdma_vm_ops = {
+ .close = aspeed_xdma_vma_close,
+};
+
+static int aspeed_xdma_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ int rc;
+ struct aspeed_xdma_client *client = file->private_data;
+ struct aspeed_xdma *ctx = client->ctx;
+
+ /* restrict file to one mapping */
+ if (client->size)
+ return -EBUSY;
+
+ client->size = vma->vm_end - vma->vm_start;
+ client->virt = gen_pool_dma_alloc(ctx->pool, client->size,
+ &client->phys);
+ if (!client->virt) {
+ client->phys = 0;
+ client->size = 0;
+ return -ENOMEM;
+ }
+
+ vma->vm_pgoff = (client->phys - ctx->mem_phys) >> PAGE_SHIFT;
+ vma->vm_ops = &aspeed_xdma_vm_ops;
+ vma->vm_private_data = client;
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ rc = io_remap_pfn_range(vma, vma->vm_start, client->phys >> PAGE_SHIFT,
+ client->size, vma->vm_page_prot);
+ if (rc) {
+ dev_warn(ctx->dev, "mmap err: v[%08lx] to p[%08x], s[%08x]\n",
+ vma->vm_start, (u32)client->phys, client->size);
+
+ gen_pool_free(ctx->pool, (unsigned long)client->virt,
+ client->size);
+
+ client->virt = NULL;
+ client->phys = 0;
+ client->size = 0;
+ return rc;
+ }
+
+ dev_dbg(ctx->dev, "mmap: v[%08lx] to p[%08x], s[%08x]\n",
+ vma->vm_start, (u32)client->phys, client->size);
+
+ return 0;
+}
+
+static int aspeed_xdma_open(struct inode *inode, struct file *file)
+{
+ struct miscdevice *misc = file->private_data;
+ struct aspeed_xdma *ctx = container_of(misc, struct aspeed_xdma, misc);
+ struct aspeed_xdma_client *client = kzalloc(sizeof(*client),
+ GFP_KERNEL);
+
+ if (!client)
+ return -ENOMEM;
+
+ kobject_get(&ctx->kobj);
+ client->ctx = ctx;
+ file->private_data = client;
+ return 0;
+}
+
+static int aspeed_xdma_release(struct inode *inode, struct file *file)
+{
+ bool reset = false;
+ unsigned long flags;
+ struct aspeed_xdma_client *client = file->private_data;
+ struct aspeed_xdma *ctx = client->ctx;
+
+ spin_lock_irqsave(&ctx->client_lock, flags);
+ if (client == ctx->current_client) {
+ spin_lock(&ctx->engine_lock);
+ if (ctx->in_reset) {
+ ctx->current_client = NULL;
+ } else {
+ ctx->in_reset = true;
+ reset = true;
+ }
+ spin_unlock(&ctx->engine_lock);
+ }
+ spin_unlock_irqrestore(&ctx->client_lock, flags);
+
+ if (reset)
+ aspeed_xdma_reset(ctx);
+
+ if (client->virt)
+ gen_pool_free(ctx->pool, (unsigned long)client->virt,
+ client->size);
+
+ kfree(client);
+ kobject_put(&ctx->kobj);
+ return 0;
+}
+
+static const struct file_operations aspeed_xdma_fops = {
+ .owner = THIS_MODULE,
+ .write = aspeed_xdma_write,
+ .poll = aspeed_xdma_poll,
+ .mmap = aspeed_xdma_mmap,
+ .open = aspeed_xdma_open,
+ .release = aspeed_xdma_release,
+};
+
static int aspeed_xdma_init_scu(struct aspeed_xdma *ctx, struct device *dev)
{
struct regmap *scu = syscon_regmap_lookup_by_phandle(dev->of_node,
@@ -814,6 +1022,16 @@ static int aspeed_xdma_probe(struct platform_device *pdev)
aspeed_xdma_init_eng(ctx);
+ ctx->misc.minor = MISC_DYNAMIC_MINOR;
+ ctx->misc.fops = &aspeed_xdma_fops;
+ ctx->misc.name = "aspeed-xdma";
+ ctx->misc.parent = dev;
+ rc = misc_register(&ctx->misc);
+ if (rc) {
+ dev_err(dev, "Failed to register xdma miscdevice.\n");
+ goto err_misc;
+ }
+
/*
* This interrupt could fire immediately so only request it once the
* engine and driver are initialized.
--
1.8.3.1
More information about the Linux-aspeed
mailing list