[PATCH 17/23] mtd: spi-nor: Move SST bits out of core.c
Tudor.Ambarus at microchip.com
Tudor.Ambarus at microchip.com
Tue Mar 3 05:07:54 AEDT 2020
From: Boris Brezillon <bbrezillon at kernel.org>
Create a SPI NOR manufacturer driver for SST chips, and move the
SST definitions outside of core.c.
Signed-off-by: Boris Brezillon <bbrezillon at kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
---
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/core.c | 123 +---------------------------
drivers/mtd/spi-nor/core.h | 1 +
drivers/mtd/spi-nor/sst.c | 151 +++++++++++++++++++++++++++++++++++
4 files changed, 156 insertions(+), 120 deletions(-)
create mode 100644 drivers/mtd/spi-nor/sst.c
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index cb06ee50bf68..ef7afc654a15 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -12,4 +12,5 @@ spi-nor-objs += issi.o
spi-nor-objs += macronix.o
spi-nor-objs += micron-st.o
spi-nor-objs += spansion.o
+spi-nor-objs += sst.o
obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 448717543d1e..9ff0b09887b4 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2017,25 +2017,6 @@ int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
* old entries may be missing 4K flag.
*/
static const struct flash_info spi_nor_ids[] = {
- /* SST -- large erase sizes are "overlays", "sectors" are 4K */
- { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
- { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
- { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) },
- { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) },
- { "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
- { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1, SECT_4K | SST_WRITE) },
- { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) },
- { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) },
- { "sst25wf020a", INFO(0x621612, 0, 64 * 1024, 4, SECT_4K) },
- { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K) },
- { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
- { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
- { "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32, SECT_4K |
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32, SECT_4K |
- SPI_NOR_DUAL_READ) },
- { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-
/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
{ "w25x05", INFO(0xef3010, 0, 64 * 1024, 1, SECT_4K) },
{ "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) },
@@ -2136,6 +2117,7 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
&spi_nor_micron,
&spi_nor_st,
&spi_nor_spansion,
+ &spi_nor_sst,
};
static const struct flash_info *
@@ -2236,92 +2218,6 @@ static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
return ret;
}
-static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
-{
- struct spi_nor *nor = mtd_to_spi_nor(mtd);
- size_t actual = 0;
- int ret;
-
- dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
-
- ret = spi_nor_lock_and_prep(nor);
- if (ret)
- return ret;
-
- ret = spi_nor_write_enable(nor);
- if (ret)
- goto out;
-
- nor->sst_write_second = false;
-
- /* Start write from odd address. */
- if (to % 2) {
- nor->program_opcode = SPINOR_OP_BP;
-
- /* write one byte. */
- ret = spi_nor_write_data(nor, to, 1, buf);
- if (ret < 0)
- goto out;
- WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
- ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto out;
-
- to++;
- actual++;
- }
-
- /* Write out most of the data here. */
- for (; actual < len - 1; actual += 2) {
- nor->program_opcode = SPINOR_OP_AAI_WP;
-
- /* write two bytes. */
- ret = spi_nor_write_data(nor, to, 2, buf + actual);
- if (ret < 0)
- goto out;
- WARN(ret != 2, "While writing 2 bytes written %i bytes\n", ret);
- ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto out;
- to += 2;
- nor->sst_write_second = true;
- }
- nor->sst_write_second = false;
-
- ret = spi_nor_write_disable(nor);
- if (ret)
- goto out;
-
- ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto out;
-
- /* Write out trailing byte if it exists. */
- if (actual != len) {
- ret = spi_nor_write_enable(nor);
- if (ret)
- goto out;
-
- nor->program_opcode = SPINOR_OP_BP;
- ret = spi_nor_write_data(nor, to, 1, buf + actual);
- if (ret < 0)
- goto out;
- WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
- ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto out;
-
- actual += 1;
-
- ret = spi_nor_write_disable(nor);
- }
-out:
- *retlen += actual;
- spi_nor_unlock_and_unprep(nor);
- return ret;
-}
-
/*
* Write an address range to the nor chip. Data must be written in
* FLASH_PAGESIZE chunks. The address range may be any size provided
@@ -2915,11 +2811,6 @@ static int spi_nor_setup(struct spi_nor *nor,
return nor->params.setup(nor, hwcaps);
}
-static void sst_set_default_init(struct spi_nor *nor)
-{
- nor->flags |= SNOR_F_HAS_LOCK;
-}
-
static void winbond_set_default_init(struct spi_nor *nor)
{
nor->params.set_4byte = winbond_set_4byte;
@@ -2934,10 +2825,6 @@ static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
{
/* Init flash parameters based on MFR */
switch (JEDEC_MFR(nor->info)) {
- case SNOR_MFR_SST:
- sst_set_default_init(nor);
- break;
-
case SNOR_MFR_WINBOND:
winbond_set_default_init(nor);
break;
@@ -3409,6 +3296,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (info->flags & SPI_NOR_HAS_LOCK)
nor->flags |= SNOR_F_HAS_LOCK;
+ mtd->_write = spi_nor_write;
+
/* Init flash parameters based on flash_info struct and SFDP */
spi_nor_init_params(nor);
@@ -3429,12 +3318,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
mtd->_is_locked = spi_nor_is_locked;
}
- /* sst nor chips use AAI word program */
- if (info->flags & SST_WRITE)
- mtd->_write = sst_write;
- else
- mtd->_write = spi_nor_write;
-
if (info->flags & USE_FSR)
nor->flags |= SNOR_F_USE_FSR;
if (info->flags & SPI_NOR_HAS_TB) {
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 8e45617578f3..7bc0f6a15b36 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -179,6 +179,7 @@ extern const struct spi_nor_manufacturer spi_nor_macronix;
extern const struct spi_nor_manufacturer spi_nor_micron;
extern const struct spi_nor_manufacturer spi_nor_st;
extern const struct spi_nor_manufacturer spi_nor_spansion;
+extern const struct spi_nor_manufacturer spi_nor_sst;
int spi_nor_write_enable(struct spi_nor *nor);
int spi_nor_write_disable(struct spi_nor *nor);
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
new file mode 100644
index 000000000000..e0af6d25d573
--- /dev/null
+++ b/drivers/mtd/spi-nor/sst.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info sst_parts[] = {
+ /* SST -- large erase sizes are "overlays", "sectors" are 4K */
+ { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8,
+ SECT_4K | SST_WRITE) },
+ { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16,
+ SECT_4K | SST_WRITE) },
+ { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32,
+ SECT_4K | SST_WRITE) },
+ { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64,
+ SECT_4K | SST_WRITE) },
+ { "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
+ { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1,
+ SECT_4K | SST_WRITE) },
+ { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2,
+ SECT_4K | SST_WRITE) },
+ { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4,
+ SECT_4K | SST_WRITE) },
+ { "sst25wf020a", INFO(0x621612, 0, 64 * 1024, 4, SECT_4K) },
+ { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K) },
+ { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8,
+ SECT_4K | SST_WRITE) },
+ { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16,
+ SECT_4K | SST_WRITE) },
+ { "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ) },
+ { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+};
+
+static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ size_t actual = 0;
+ int ret;
+
+ dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
+
+ ret = spi_nor_lock_and_prep(nor);
+ if (ret)
+ return ret;
+
+ ret = spi_nor_write_enable(nor);
+ if (ret)
+ goto out;
+
+ nor->sst_write_second = false;
+
+ /* Start write from odd address. */
+ if (to % 2) {
+ nor->program_opcode = SPINOR_OP_BP;
+
+ /* write one byte. */
+ ret = spi_nor_write_data(nor, to, 1, buf);
+ if (ret < 0)
+ goto out;
+ WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto out;
+
+ to++;
+ actual++;
+ }
+
+ /* Write out most of the data here. */
+ for (; actual < len - 1; actual += 2) {
+ nor->program_opcode = SPINOR_OP_AAI_WP;
+
+ /* write two bytes. */
+ ret = spi_nor_write_data(nor, to, 2, buf + actual);
+ if (ret < 0)
+ goto out;
+ WARN(ret != 2, "While writing 2 bytes written %i bytes\n", ret);
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto out;
+ to += 2;
+ nor->sst_write_second = true;
+ }
+ nor->sst_write_second = false;
+
+ ret = spi_nor_write_disable(nor);
+ if (ret)
+ goto out;
+
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto out;
+
+ /* Write out trailing byte if it exists. */
+ if (actual != len) {
+ ret = spi_nor_write_enable(nor);
+ if (ret)
+ goto out;
+
+ nor->program_opcode = SPINOR_OP_BP;
+ ret = spi_nor_write_data(nor, to, 1, buf + actual);
+ if (ret < 0)
+ goto out;
+ WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto out;
+
+ actual += 1;
+
+ ret = spi_nor_write_disable(nor);
+ }
+out:
+ *retlen += actual;
+ spi_nor_unlock_and_unprep(nor);
+ return ret;
+}
+
+static void sst_default_init(struct spi_nor *nor)
+{
+ nor->flags |= SNOR_F_HAS_LOCK;
+}
+
+static void sst_post_sfdp_fixups(struct spi_nor *nor)
+{
+ if (nor->info->flags & SST_WRITE)
+ nor->mtd._write = sst_write;
+}
+
+static const struct spi_nor_fixups sst_fixups = {
+ .default_init = sst_default_init,
+ .post_sfdp = sst_post_sfdp_fixups,
+};
+
+const struct spi_nor_manufacturer spi_nor_sst = {
+ .name = "sst",
+ .parts = sst_parts,
+ .nparts = ARRAY_SIZE(sst_parts),
+ .fixups = &sst_fixups,
+};
--
2.23.0
More information about the Linux-aspeed
mailing list