[PATCH v4] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN
kernel test robot
lkp at intel.com
Wed Jun 10 21:52:30 AEST 2020
Hi Manikandan,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on hwmon/hwmon-next]
[also build test WARNING on v5.7 next-20200609]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Manikandan-Elumalai/hwmon-adm1275-Enable-adm1278-ADM1278_TEMP1_EN/20200610-162820
base: https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
config: alpha-randconfig-r035-20200608 (attached as .config)
compiler: alpha-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=alpha
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp at intel.com>
All warnings (new ones prefixed by >>, old ones prefixed by <<):
drivers/hwmon/pmbus/adm1275.c: In function 'adm1275_probe':
>> drivers/hwmon/pmbus/adm1275.c:684:14: warning: suggest parentheses around comparison in operand of '&' [-Wparentheses]
684 | if (config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN) != ADM1278_VOUT_EN | ADM1278_TEMP1_EN) {
| ^
>> drivers/hwmon/pmbus/adm1275.c:684:14: warning: suggest parentheses around arithmetic in operand of '|' [-Wparentheses]
684 | if (config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN) != ADM1278_VOUT_EN | ADM1278_TEMP1_EN) {
vim +684 drivers/hwmon/pmbus/adm1275.c
464
465 static int adm1275_probe(struct i2c_client *client,
466 const struct i2c_device_id *id)
467 {
468 u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
469 int config, device_config;
470 int ret;
471 struct pmbus_driver_info *info;
472 struct adm1275_data *data;
473 const struct i2c_device_id *mid;
474 const struct coefficients *coefficients;
475 int vindex = -1, voindex = -1, cindex = -1, pindex = -1;
476 int tindex = -1;
477 u32 shunt;
478
479 if (!i2c_check_functionality(client->adapter,
480 I2C_FUNC_SMBUS_READ_BYTE_DATA
481 | I2C_FUNC_SMBUS_BLOCK_DATA))
482 return -ENODEV;
483
484 ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, block_buffer);
485 if (ret < 0) {
486 dev_err(&client->dev, "Failed to read Manufacturer ID\n");
487 return ret;
488 }
489 if (ret != 3 || strncmp(block_buffer, "ADI", 3)) {
490 dev_err(&client->dev, "Unsupported Manufacturer ID\n");
491 return -ENODEV;
492 }
493
494 ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
495 if (ret < 0) {
496 dev_err(&client->dev, "Failed to read Manufacturer Model\n");
497 return ret;
498 }
499 for (mid = adm1275_id; mid->name[0]; mid++) {
500 if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
501 break;
502 }
503 if (!mid->name[0]) {
504 dev_err(&client->dev, "Unsupported device\n");
505 return -ENODEV;
506 }
507
508 if (id->driver_data != mid->driver_data)
509 dev_notice(&client->dev,
510 "Device mismatch: Configured %s, detected %s\n",
511 id->name, mid->name);
512
513 config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
514 if (config < 0)
515 return config;
516
517 device_config = i2c_smbus_read_byte_data(client, ADM1275_DEVICE_CONFIG);
518 if (device_config < 0)
519 return device_config;
520
521 data = devm_kzalloc(&client->dev, sizeof(struct adm1275_data),
522 GFP_KERNEL);
523 if (!data)
524 return -ENOMEM;
525
526 if (of_property_read_u32(client->dev.of_node,
527 "shunt-resistor-micro-ohms", &shunt))
528 shunt = 1000; /* 1 mOhm if not set via DT */
529
530 if (shunt == 0)
531 return -EINVAL;
532
533 data->id = mid->driver_data;
534
535 info = &data->info;
536
537 info->pages = 1;
538 info->format[PSC_VOLTAGE_IN] = direct;
539 info->format[PSC_VOLTAGE_OUT] = direct;
540 info->format[PSC_CURRENT_OUT] = direct;
541 info->format[PSC_POWER] = direct;
542 info->format[PSC_TEMPERATURE] = direct;
543 info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
544 PMBUS_HAVE_SAMPLES;
545
546 info->read_word_data = adm1275_read_word_data;
547 info->read_byte_data = adm1275_read_byte_data;
548 info->write_word_data = adm1275_write_word_data;
549
550 switch (data->id) {
551 case adm1075:
552 if (device_config & ADM1275_IOUT_WARN2_SELECT)
553 data->have_oc_fault = true;
554 else
555 data->have_uc_fault = true;
556 data->have_pin_max = true;
557 data->have_vaux_status = true;
558
559 coefficients = adm1075_coefficients;
560 vindex = 0;
561 switch (config & ADM1075_IRANGE_MASK) {
562 case ADM1075_IRANGE_25:
563 cindex = 1;
564 pindex = 3;
565 break;
566 case ADM1075_IRANGE_50:
567 cindex = 2;
568 pindex = 4;
569 break;
570 default:
571 dev_err(&client->dev, "Invalid input current range");
572 break;
573 }
574
575 info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
576 | PMBUS_HAVE_STATUS_INPUT;
577 if (config & ADM1275_VIN_VOUT_SELECT)
578 info->func[0] |=
579 PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
580 break;
581 case adm1272:
582 data->have_vout = true;
583 data->have_pin_max = true;
584 data->have_temp_max = true;
585 data->have_power_sampling = true;
586
587 coefficients = adm1272_coefficients;
588 vindex = (config & ADM1275_VRANGE) ? 1 : 0;
589 cindex = (config & ADM1272_IRANGE) ? 3 : 2;
590 /* pindex depends on the combination of the above */
591 switch (config & (ADM1275_VRANGE | ADM1272_IRANGE)) {
592 case 0:
593 default:
594 pindex = 4;
595 break;
596 case ADM1275_VRANGE:
597 pindex = 5;
598 break;
599 case ADM1272_IRANGE:
600 pindex = 6;
601 break;
602 case ADM1275_VRANGE | ADM1272_IRANGE:
603 pindex = 7;
604 break;
605 }
606 tindex = 8;
607
608 info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
609 PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
610
611 /* Enable VOUT if not enabled (it is disabled by default) */
612 if (!(config & ADM1278_VOUT_EN)) {
613 config |= ADM1278_VOUT_EN;
614 ret = i2c_smbus_write_byte_data(client,
615 ADM1275_PMON_CONFIG,
616 config);
617 if (ret < 0) {
618 dev_err(&client->dev,
619 "Failed to enable VOUT monitoring\n");
620 return -ENODEV;
621 }
622 }
623
624 if (config & ADM1278_TEMP1_EN)
625 info->func[0] |=
626 PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
627 if (config & ADM1278_VIN_EN)
628 info->func[0] |= PMBUS_HAVE_VIN;
629 break;
630 case adm1275:
631 if (device_config & ADM1275_IOUT_WARN2_SELECT)
632 data->have_oc_fault = true;
633 else
634 data->have_uc_fault = true;
635 data->have_vout = true;
636
637 coefficients = adm1275_coefficients;
638 vindex = (config & ADM1275_VRANGE) ? 0 : 1;
639 cindex = 2;
640
641 if (config & ADM1275_VIN_VOUT_SELECT)
642 info->func[0] |=
643 PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
644 else
645 info->func[0] |=
646 PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
647 break;
648 case adm1276:
649 if (device_config & ADM1275_IOUT_WARN2_SELECT)
650 data->have_oc_fault = true;
651 else
652 data->have_uc_fault = true;
653 data->have_vout = true;
654 data->have_pin_max = true;
655
656 coefficients = adm1276_coefficients;
657 vindex = (config & ADM1275_VRANGE) ? 0 : 1;
658 cindex = 2;
659 pindex = (config & ADM1275_VRANGE) ? 3 : 4;
660
661 info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
662 | PMBUS_HAVE_STATUS_INPUT;
663 if (config & ADM1275_VIN_VOUT_SELECT)
664 info->func[0] |=
665 PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
666 break;
667 case adm1278:
668 data->have_vout = true;
669 data->have_pin_max = true;
670 data->have_temp_max = true;
671 data->have_power_sampling = true;
672
673 coefficients = adm1278_coefficients;
674 vindex = 0;
675 cindex = 1;
676 pindex = 2;
677 tindex = 3;
678
679 info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
680 PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
681 PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
682
683 /* Enable VOUT & TEMP1 if not enabled (disabled by default) */
> 684 if (config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN) != ADM1278_VOUT_EN | ADM1278_TEMP1_EN) {
685 config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN;
686 ret = i2c_smbus_write_byte_data(client,
687 ADM1275_PMON_CONFIG,
688 config);
689 if (ret < 0) {
690 dev_err(&client->dev,
691 "Failed to enable VOUT monitoring\n");
692 return -ENODEV;
693 }
694 }
695
696 if (config & ADM1278_VIN_EN)
697 info->func[0] |= PMBUS_HAVE_VIN;
698 break;
699 case adm1293:
700 case adm1294:
701 data->have_iout_min = true;
702 data->have_pin_min = true;
703 data->have_pin_max = true;
704 data->have_mfr_vaux_status = true;
705 data->have_power_sampling = true;
706
707 coefficients = adm1293_coefficients;
708
709 voindex = 0;
710 switch (config & ADM1293_VIN_SEL_MASK) {
711 case ADM1293_VIN_SEL_012: /* 1.2V */
712 vindex = 0;
713 break;
714 case ADM1293_VIN_SEL_074: /* 7.4V */
715 vindex = 1;
716 break;
717 case ADM1293_VIN_SEL_210: /* 21V */
718 vindex = 2;
719 break;
720 default: /* disabled */
721 break;
722 }
723
724 switch (config & ADM1293_IRANGE_MASK) {
725 case ADM1293_IRANGE_25:
726 cindex = 3;
727 break;
728 case ADM1293_IRANGE_50:
729 cindex = 4;
730 break;
731 case ADM1293_IRANGE_100:
732 cindex = 5;
733 break;
734 case ADM1293_IRANGE_200:
735 cindex = 6;
736 break;
737 }
738
739 if (vindex >= 0)
740 pindex = 7 + vindex * 4 + (cindex - 3);
741
742 if (config & ADM1293_VAUX_EN)
743 info->func[0] |=
744 PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
745
746 info->func[0] |= PMBUS_HAVE_PIN |
747 PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
748
749 break;
750 default:
751 dev_err(&client->dev, "Unsupported device\n");
752 return -ENODEV;
753 }
754
755 if (voindex < 0)
756 voindex = vindex;
757 if (vindex >= 0) {
758 info->m[PSC_VOLTAGE_IN] = coefficients[vindex].m;
759 info->b[PSC_VOLTAGE_IN] = coefficients[vindex].b;
760 info->R[PSC_VOLTAGE_IN] = coefficients[vindex].R;
761 }
762 if (voindex >= 0) {
763 info->m[PSC_VOLTAGE_OUT] = coefficients[voindex].m;
764 info->b[PSC_VOLTAGE_OUT] = coefficients[voindex].b;
765 info->R[PSC_VOLTAGE_OUT] = coefficients[voindex].R;
766 }
767 if (cindex >= 0) {
768 /* Scale current with sense resistor value */
769 info->m[PSC_CURRENT_OUT] =
770 coefficients[cindex].m * shunt / 1000;
771 info->b[PSC_CURRENT_OUT] = coefficients[cindex].b;
772 info->R[PSC_CURRENT_OUT] = coefficients[cindex].R;
773 }
774 if (pindex >= 0) {
775 info->m[PSC_POWER] =
776 coefficients[pindex].m * shunt / 1000;
777 info->b[PSC_POWER] = coefficients[pindex].b;
778 info->R[PSC_POWER] = coefficients[pindex].R;
779 }
780 if (tindex >= 0) {
781 info->m[PSC_TEMPERATURE] = coefficients[tindex].m;
782 info->b[PSC_TEMPERATURE] = coefficients[tindex].b;
783 info->R[PSC_TEMPERATURE] = coefficients[tindex].R;
784 }
785
786 return pmbus_do_probe(client, id, info);
787 }
788
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/gzip
Size: 26324 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linux-aspeed/attachments/20200610/f4068df7/attachment-0001.gz>
More information about the Linux-aspeed
mailing list