[PATCH v3] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN

Guenter Roeck linux at roeck-us.net
Wed Jun 10 02:56:04 AEST 2020


On 6/9/20 8:26 AM, Manikandan wrote:
> On Mon, Jun 08, 2020 at 06:49:45AM -0700, Guenter Roeck wrote:
>> On 6/8/20 3:43 AM, Manikandan Elumalai wrote:
>>> The adm1278 temp attribute need it for openbmc platform .
>>> This feature not enabled by default, so PMON_CONFIG needs to enable it.
>>>
>>> v3:
>>> ----
>>> fix invalid signed-off.
>>> removed checkpath warnings.
>>> write ADM1278_TEMP1_EN and ADM1278_VOUT_EN conf in single line operation.
>>>
>>> v2:
>>> ----
>>> add Signed-off-by.
>>> removed ADM1278_TEMP1_EN check.
>>>
>>> Signed-off-by: Manikandan Elumalai <manikandan.hcl.ers.epl at gmail.com>
>>> ---
>>>  drivers/hwmon/pmbus/adm1275.c | 10 ++++------
>>>  1 file changed, 4 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
>>> index 5caa37fb..4782e31 100644
>>> --- a/drivers/hwmon/pmbus/adm1275.c
>>> +++ b/drivers/hwmon/pmbus/adm1275.c
>>> @@ -666,11 +666,12 @@ static int adm1275_probe(struct i2c_client *client,
>>>  		tindex = 3;
>>>  
>>>  		info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
>>> -			PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
>>> +			PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
>>> +			PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
>>>  
>>> -		/* Enable VOUT if not enabled (it is disabled by default) */
>>> +		/* Enable VOUT & TEMP1 if not enabled (disabled by default) */
>>>  		if (!(config & ADM1278_VOUT_EN)) {
>>
>> This if statement needs to be
>> 		if (config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN) != ADM1278_VOUT_EN | ADM1278_TEMP1_EN)
>>
>           Hi Guenter,
> 
>              The below warning shown by checkpatch after changes,
> 
>                   WARNING: line over 80 characters
>                    #38: FILE: drivers/hwmon/pmbus/adm1275.c:672:
>                    + if (config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN) != ADM1278_VOUT_EN | ADM1278_TEMP1_EN) {
>  
>                    total: 0 errors, 1 warnings, 24 lines checked
> 
>               I didn't see any if() condition made as two line in the driver . Is this acceptable warning ?
> 

The warning is (or should be) gone in the latest upstream kernel -
the line length limit is now 100 bytes. Just ignore that warning,
or rebase your patch to the latest upstream kernel.

Guenter

>          Thanks
>          Mani.E
>>> -			config |= ADM1278_VOUT_EN;
>>> +			config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN;
>>>  			ret = i2c_smbus_write_byte_data(client,
>>>  							ADM1275_PMON_CONFIG,
>>>  							config);
>>> @@ -681,9 +682,6 @@ static int adm1275_probe(struct i2c_client *client,
>>>  			}
>>>  		}
>>>  
>>> -		if (config & ADM1278_TEMP1_EN)
>>> -			info->func[0] |=
>>> -				PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
>>>  		if (config & ADM1278_VIN_EN)
>>>  			info->func[0] |= PMBUS_HAVE_VIN;
>>>  		break;
>>>
>>



More information about the Linux-aspeed mailing list