[PATCH v1] ARM: dts: aspeed: mihawk: add aliases for i2c and add thermal sensor
Ben Pai
Ben_Pai at wistron.com
Wed Jun 3 19:26:22 AEST 2020
1.Set the bus id for each mux channel to avoid switching channels
multiple times
2.Set smbus_en of IO expander to 1 in order to be able to read tmp401
sensor
3.Add 8 tmp401 thermal sensors
Signed-off-by: Ben Pai <Ben_Pai at wistron.com>
---
arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 449 +++++++++++++++++++-
1 file changed, 444 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index f7e935ede919..78451b283d93 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -7,7 +7,52 @@
/ {
model = "Mihawk BMC";
compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
-
+ aliases {
+ i2c215 = &bus6_mux215;
+ i2c216 = &bus6_mux216;
+ i2c217 = &bus6_mux217;
+ i2c218 = &bus6_mux218;
+ i2c219 = &bus6_mux219;
+ i2c220 = &bus6_mux220;
+ i2c221 = &bus6_mux221;
+ i2c222 = &bus6_mux222;
+ i2c223 = &bus7_mux223;
+ i2c224 = &bus7_mux224;
+ i2c225 = &bus7_mux225;
+ i2c226 = &bus7_mux226;
+ i2c227 = &bus7_mux227;
+ i2c228 = &bus7_mux228;
+ i2c229 = &bus7_mux229;
+ i2c230 = &bus7_mux230;
+ i2c231 = &bus9_mux231;
+ i2c232 = &bus9_mux232;
+ i2c233 = &bus9_mux233;
+ i2c234 = &bus9_mux234;
+ i2c235 = &bus9_mux235;
+ i2c236 = &bus9_mux236;
+ i2c237 = &bus9_mux237;
+ i2c238 = &bus9_mux238;
+ i2c239 = &bus10_mux239;
+ i2c240 = &bus10_mux240;
+ i2c241 = &bus10_mux241;
+ i2c242 = &bus10_mux242;
+ i2c243 = &bus10_mux243;
+ i2c244 = &bus10_mux244;
+ i2c245 = &bus10_mux245;
+ i2c246 = &bus10_mux246;
+ i2c247 = &bus12_mux247;
+ i2c248 = &bus12_mux248;
+ i2c249 = &bus12_mux249;
+ i2c250 = &bus12_mux250;
+ i2c251 = &bus13_mux251;
+ i2c252 = &bus13_mux252;
+ i2c253 = &bus13_mux253;
+ i2c254 = &bus13_mux254;
+ i2c255 = &bus13_mux255;
+ i2c256 = &bus13_mux256;
+ i2c257 = &bus13_mux257;
+ i2c258 = &bus13_mux258;
+ };
chosen {
stdout-path = &uart5;
@@ -630,6 +675,55 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
+
+ bus6_mux215: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ bus6_mux216: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ bus6_mux217: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ bus6_mux218: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ bus6_mux219: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ bus6_mux220: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ bus6_mux221: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ bus6_mux222: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
};
};
@@ -644,6 +738,55 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
+
+ bus7_mux223: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ bus7_mux224: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ bus7_mux225: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ bus7_mux226: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ bus7_mux227: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ bus7_mux228: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ bus7_mux229: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ bus7_mux230: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
};
};
@@ -684,6 +827,68 @@
i2c-mux-idle-disconnect;
interrupt-controller;
#interrupt-cells = <2>;
+
+ bus9_mux231: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tca9554 at 39 {
+ compatible = "ti,tca9554";
+ reg = <0x39>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ smbus0 {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "smbus0";
+ };
+ };
+
+ tmp431 at 4c {
+ compatible = "ti,tmp401";
+ reg = <0x4c>;
+ };
+ };
+
+ bus9_mux232: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tca9554 at 39 {
+ compatible = "ti,tca9554";
+ reg = <0x39>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ smbus1 {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "smbus1";
+ };
+ };
+
+ tmp431 at 4c {
+ compatible = "ti,tmp401";
+ reg = <0x4c>;
+ };
+ };
+
+ bus9_mux233: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ bus9_mux234: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
};
pca9545 at 71 {
@@ -695,6 +900,68 @@
i2c-mux-idle-disconnect;
interrupt-controller;
#interrupt-cells = <2>;
+
+ bus9_mux235: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tca9554 at 39 {
+ compatible = "ti,tca9554";
+ reg = <0x39>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ smbus2 {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "smbus2";
+ };
+ };
+
+ tmp431 at 4c {
+ compatible = "ti,tmp401";
+ reg = <0x4c>;
+ };
+ };
+
+ bus9_mux236: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tca9554 at 39 {
+ compatible = "ti,tca9554";
+ reg = <0x39>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ smbus3 {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "smbus3";
+ };
+ };
+
+ tmp431 at 4c {
+ compatible = "ti,tmp401";
+ reg = <0x4c>;
+ };
+ };
+
+ bus9_mux237: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ bus9_mux238: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
};
};
@@ -725,6 +992,68 @@
i2c-mux-idle-disconnect;
interrupt-controller;
#interrupt-cells = <2>;
+
+ bus10_mux239: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tca9554 at 39 {
+ compatible = "ti,tca9554";
+ reg = <0x39>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ smbus4 {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "smbus4";
+ };
+ };
+
+ tmp431 at 4c {
+ compatible = "ti,tmp401";
+ reg = <0x4c>;
+ };
+ };
+
+ bus10_mux240: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tca9554 at 39 {
+ compatible = "ti,tca9554";
+ reg = <0x39>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ smbus5 {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "smbus5";
+ };
+ };
+
+ tmp431 at 4c {
+ compatible = "ti,tmp401";
+ reg = <0x4c>;
+ };
+ };
+
+ bus10_mux241: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ bus10_mux242: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
};
pca9545 at 71 {
@@ -736,6 +1065,68 @@
i2c-mux-idle-disconnect;
interrupt-controller;
#interrupt-cells = <2>;
+
+ bus10_mux243: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tca9554 at 39 {
+ compatible = "ti,tca9554";
+ reg = <0x39>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ smbus6 {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "smbus6";
+ };
+ };
+
+ tmp431 at 4c {
+ compatible = "ti,tmp401";
+ reg = <0x4c>;
+ };
+ };
+
+ bus10_mux244: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tca9554 at 39 {
+ compatible = "ti,tca9554";
+ reg = <0x39>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ smbus7 {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "smbus7";
+ };
+ };
+
+ tmp431 at 4c {
+ compatible = "ti,tmp401";
+ reg = <0x4c>;
+ };
+ };
+
+ bus10_mux245: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ bus10_mux246: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
};
};
@@ -796,7 +1187,7 @@
interrupt-controller;
#interrupt-cells = <2>;
- i2c at 0 {
+ bus12_mux247: i2c at 0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
@@ -807,7 +1198,7 @@
};
};
- i2c at 1 {
+ bus12_mux248: i2c at 1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
@@ -818,7 +1209,7 @@
};
};
- i2c at 2 {
+ bus12_mux249: i2c at 2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
@@ -829,7 +1220,7 @@
};
};
- i2c at 3 {
+ bus12_mux250: i2c at 3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
@@ -857,6 +1248,54 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
+
+ bus13_mux251: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ bus13_mux252: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ bus13_mux253: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ bus13_mux254: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ bus13_mux255: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ bus13_mux256: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ bus13_mux257: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ bus13_mux258: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
};
};
--
2.17.1
---------------------------------------------------------------------------------------------------------------------------------------------------------------
This email contains confidential or legally privileged information and is for the sole use of its intended recipient.
Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
More information about the Linux-aspeed
mailing list