[PATCH v6 10/12] ARM: dts: aspeed: ast2600: Add XDMA Engine

[Eddie James]

Add a node for the XDMA engine with all the necessary information.

Signed-off-by: Eddie James <eajames at linux.ibm.com>
Reviewed-by: Andrew Jeffery <andrew at aj.id.au>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 6557212..974cfa3 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -3,6 +3,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/ast2600-clock.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
 
 / {
 	model = "Aspeed BMC";
@@ -291,6 +292,18 @@
 				quality = <100>;
 			};
 
+			xdma: xdma at 1e6e7000 {
+				compatible = "aspeed,ast2600-xdma";
+				reg = <0x1e6e7000 0x100>;
+				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+				resets = <&syscon ASPEED_RESET_DEV_XDMA>;
+				interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+						      <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
+				pcie-device = "bmc";
+				aspeed,scu = <&syscon>;
+				status = "disabled";
+			};
+
 			gpio0: gpio at 1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;
-- 
1.8.3.1