[PATCH 2/3] media: aspeed: Use runtime configuration
Eddie James
eajames at linux.ibm.com
Wed Jan 8 06:18:08 AEDT 2020
On 1/6/20 9:43 PM, Joel Stanley wrote:
> The aspeed video IP has some differences between SoC families. Currently
> the driver decides which registers to use at compile time, which means
> a single kernel can not be used between platforms.
>
> Switch to using runtime configuration of the registers that vary between
> SoC families. This is in preparation for upcoming ast2600 support.
Reviewed-by: Eddie James <eajames at linux.ibm.com>
>
> Signed-off-by: Joel Stanley <joel at jms.id.au>
> ---
> drivers/media/platform/aspeed-video.c | 53 ++++++++++++++++++++-------
> 1 file changed, 39 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
> index 8f849d9866af..d70b893fd4cf 100644
> --- a/drivers/media/platform/aspeed-video.c
> +++ b/drivers/media/platform/aspeed-video.c
> @@ -72,11 +72,8 @@
> #define VE_SEQ_CTRL_CAP_BUSY BIT(16)
> #define VE_SEQ_CTRL_COMP_BUSY BIT(18)
>
> -#ifdef CONFIG_MACH_ASPEED_G5
> -#define VE_SEQ_CTRL_JPEG_MODE BIT(13) /* AST2500 */
> -#else
> -#define VE_SEQ_CTRL_JPEG_MODE BIT(8) /* AST2400 */
> -#endif /* CONFIG_MACH_ASPEED_G5 */
> +#define AST2500_VE_SEQ_CTRL_JPEG_MODE BIT(13)
> +#define AST2400_VE_SEQ_CTRL_JPEG_MODE BIT(8)
>
> #define VE_CTRL 0x008
> #define VE_CTRL_HSYNC_POL BIT(0)
> @@ -220,6 +217,9 @@ struct aspeed_video {
> struct video_device vdev;
> struct mutex video_lock; /* v4l2 and videobuf2 lock */
>
> + u32 jpeg_mode;
> + u32 comp_size_read;
> +
> wait_queue_head_t wait;
> spinlock_t lock; /* buffer list lock */
> struct delayed_work res_work;
> @@ -243,6 +243,21 @@ struct aspeed_video {
>
> #define to_aspeed_video(x) container_of((x), struct aspeed_video, v4l2_dev)
>
> +struct aspeed_video_config {
> + u32 jpeg_mode;
> + u32 comp_size_read;
> +};
> +
> +static const struct aspeed_video_config ast2400_config = {
> + .jpeg_mode = AST2400_VE_SEQ_CTRL_JPEG_MODE,
> + .comp_size_read = VE_OFFSET_COMP_STREAM,
> +};
> +
> +static const struct aspeed_video_config ast2500_config = {
> + .jpeg_mode = AST2500_VE_SEQ_CTRL_JPEG_MODE,
> + .comp_size_read = VE_OFFSET_COMP_STREAM,
> +};
> +
> static const u32 aspeed_video_jpeg_header[ASPEED_VIDEO_JPEG_HEADER_SIZE] = {
> 0xe0ffd8ff, 0x464a1000, 0x01004649, 0x60000101, 0x00006000, 0x0f00feff,
> 0x00002d05, 0x00000000, 0x00000000, 0x00dbff00
> @@ -572,7 +587,7 @@ static irqreturn_t aspeed_video_irq(int irq, void *arg)
> if (sts & VE_INTERRUPT_COMP_COMPLETE) {
> struct aspeed_video_buffer *buf;
> u32 frame_size = aspeed_video_read(video,
> - VE_OFFSET_COMP_STREAM);
> + video->comp_size_read);
>
> spin_lock(&video->lock);
> clear_bit(VIDEO_FRAME_INPRG, &video->flags);
> @@ -907,7 +922,7 @@ static void aspeed_video_init_regs(struct aspeed_video *video)
> FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
> FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10);
> u32 ctrl = VE_CTRL_AUTO_OR_CURSOR;
> - u32 seq_ctrl = VE_SEQ_CTRL_JPEG_MODE;
> + u32 seq_ctrl = video->jpeg_mode;;
>
> if (video->frame_rate)
> ctrl |= FIELD_PREP(VE_CTRL_FRC, video->frame_rate);
> @@ -1653,8 +1668,17 @@ static int aspeed_video_init(struct aspeed_video *video)
> return rc;
> }
>
> +static const struct of_device_id aspeed_video_of_match[] = {
> + { .compatible = "aspeed,ast2400-video-engine", .data = &ast2400_config },
> + { .compatible = "aspeed,ast2500-video-engine", .data = &ast2500_config },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_video_of_match);
> +
> static int aspeed_video_probe(struct platform_device *pdev)
> {
> + const struct aspeed_video_config *config;
> + const struct of_device_id *match;
> struct aspeed_video *video;
> int rc;
>
> @@ -1666,6 +1690,14 @@ static int aspeed_video_probe(struct platform_device *pdev)
> if (IS_ERR(video->base))
> return PTR_ERR(video->base);
>
> + match = of_match_node(aspeed_video_of_match, pdev->dev.of_node);
> + if (!match)
> + return -EINVAL;
> +
> + config = match->data;
> + video->jpeg_mode = config->jpeg_mode;
> + video->comp_size_read = config->comp_size_read;
> +
> video->frame_rate = 30;
> video->dev = &pdev->dev;
> spin_lock_init(&video->lock);
> @@ -1712,13 +1744,6 @@ static int aspeed_video_remove(struct platform_device *pdev)
> return 0;
> }
>
> -static const struct of_device_id aspeed_video_of_match[] = {
> - { .compatible = "aspeed,ast2400-video-engine" },
> - { .compatible = "aspeed,ast2500-video-engine" },
> - {}
> -};
> -MODULE_DEVICE_TABLE(of, aspeed_video_of_match);
> -
> static struct platform_driver aspeed_video_driver = {
> .driver = {
> .name = DEVICE_NAME,
More information about the Linux-aspeed
mailing list