[PATCH] ARM: DTS: Aspeed: Add YADRO Nicole BMC
Alexander Filippov
a.filippov at yadro.com
Thu Apr 23 21:21:00 AEST 2020
Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured
by YADRO.
Signed-off-by: Alexander Filippov <a.filippov at yadro.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts | 316 ++++++++++++++++++++
2 files changed, 317 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e8dd99201397..6f9fe0f959f2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1347,6 +1347,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-microsoft-olympus.dtb \
aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-mihawk.dtb \
+ aspeed-bmc-opp-nicole.dtb \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
aspeed-bmc-opp-swift.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
new file mode 100644
index 000000000000..4f2b91d6a891
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Nicole BMC";
+ compatible = "yadro,nicole-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory at 80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer at 9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>; /* 16M */
+ };
+
+ flash_memory: region at 98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+
+ coldfire_memory: codefire_memory at 9ef00000 {
+ reg = <0x9ef00000 0x00100000>;
+ no-map;
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+ };
+
+ identify {
+ gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+ };
+
+ alarm_red {
+ gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>;
+ };
+
+ alarm_yellow {
+ gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-gpio-delays;
+
+ memory-region = <&coldfire_memory>;
+ aspeed,sram = <&sram>;
+ aspeed,cvic = <&cvic>;
+
+ clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 2)>;
+ };
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 12>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ use-ncsi;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+ <&syscon ASPEED_CLK_MAC1RCLK>;
+ clock-names = "MACCLK", "RCLK";
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom at 50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ pagesize = <64>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+ /* CPU0 characterization connector */
+};
+
+&i2c3 {
+ status = "okay";
+ /* CLK GEN SI5338 */
+};
+
+&i2c4 {
+ status = "okay";
+ /* Voltage regulators for CPU0 */
+};
+
+&i2c5 {
+ status = "okay";
+ /* Voltage regulators for CPU1 */
+};
+
+&i2c6 {
+ status = "okay";
+
+ rtc at 32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+ /* CPLD */
+};
+
+&gpio {
+ gpio-line-names =
+ /*A0-A7*/ "","cfam-reset","","","","","fsi-mux","",
+ /*B0-B7*/ "","","","","","","","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "fsi-enable","","","nic_func_mode0","nic_func_mode1","","","",
+ /*E0-E7*/ "","ncsi_cfg","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","","","",
+ /*J0-J7*/ "","","checkstop","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "","","","","","","","",
+ /*O0-O7*/ "","","id-button","","","","","",
+ /*P0-P7*/ "","fsi-trans","","","","","","",
+ /*Q0-Q7*/ "","","","","","","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","","","","","","seq_cont",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","",
+ /*AA0-AA7*/ "fsi-clock","led-alarm-yellow","fsi-data","led-alarm-red",
+ "led-power","","","led-identify",
+ /*AB0-AB7*/ "","","","","","","","",
+ /*AC0-AC7*/ "","","","","","","","";
+
+ nic_func_mode0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+ nic_func_mode1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+ seq_cont {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+ ncsi_cfg {
+ gpio-hog;
+ input;
+ gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
--
2.21.1
More information about the Linux-aspeed
mailing list