[PATCH 17/23] mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()
Tudor.Ambarus at microchip.com
Tudor.Ambarus at microchip.com
Wed Sep 18 01:55:35 AEST 2019
From: Tudor Ambarus <tudor.ambarus at microchip.com>
Make sure that when doing a lock() or an unlock() operation we don't clear
the QE bit from Status Register 2.
JESD216 revB or later offers information about the *default* Status
Register commands to use (see BFPT DWORDS[15], bits 22:20). In this
standard, Status Register 1 refers to the first data byte transferred on a
Read Status (05h) or Write Status (01h) command. Status register 2 refers
to the byte read using instruction 35h. Status register 2 is the second
byte transferred in a Write Status (01h) command.
Industry naming and definitions of these Status Registers may differ.
The definitions are described in JESD216B, BFPT DWORDS[15], bits 22:20.
There are cases in which writing only one byte to the Status Register 1
has the side-effect of clearing Status Register 2 and implicitly the Quad
Enable bit. This side-effect is hit just by the
BFPT_DWORD15_QER_SR2_BIT1_BUGGY and BFPT_DWORD15_QER_SR2_BIT1 cases.
Suggested-by: Boris Brezillon <boris.brezillon at collabora.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus at microchip.com>
---
drivers/mtd/spi-nor/spi-nor.c | 170 +++++++++++++++++++++++++++++++++++++-----
include/linux/mtd/spi-nor.h | 2 +
2 files changed, 152 insertions(+), 20 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 303a7bcf3423..4a513ed13807 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -836,6 +836,132 @@ static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2)
return ret;
}
+/**
+ * spi_nor_write_sr1_and_check() - Write one byte to the Status Register and
+ * ensure the bits in the mask match the written value.
+ * @nor: pointer to a 'struct spi_nor'.
+ * status_new: byte value to be written to the Status Register.
+ * mask: mask with which to check the written value.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_sr1_and_check(struct spi_nor *nor, u8 status_new,
+ u8 mask)
+{
+ int ret;
+
+ nor->bouncebuf[0] = status_new;
+
+ ret = spi_nor_write_sr(nor, &nor->bouncebuf[0], 1);
+ if (ret)
+ return ret;
+
+ ret = spi_nor_read_sr(nor, &nor->bouncebuf[0]);
+ if (ret)
+ return ret;
+
+ if ((nor->bouncebuf[0] & mask) != (status_new & mask)) {
+ dev_err(nor->dev, "Read back test failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * spi_nor_write_16bit_sr_and_check() - Write the Status Register 1 and the
+ * Status Register 2 in one shot. Ensure that the bits in the mask match the
+ * written value in the Status Register 1, and that the 16-bit Write did not
+ * affect what was already in the Status Register 2.
+ * @nor: pointer to a 'struct spi_nor'.
+ * status_new: byte value to be written to the Status Register 1.
+ * mask: mask with which to check the written value on Status Register 1.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 status_new,
+ u8 mask)
+{
+ int ret;
+ u8 *sr_cr = nor->bouncebuf;
+ u8 cr_written;
+
+ /* Make sure we don't overwrite the contents of Status Register 2. */
+ if (!(nor->flags & SNOR_F_NO_READ_CR)) {
+ ret = spi_nor_read_cr(nor, &sr_cr[1]);
+ if (ret)
+ return ret;
+ } else if (nor->flash.quad_enable) {
+ /*
+ * If the Status Register 2 Read command (35h) is not
+ * supported, we should at least be sure we don't
+ * change the value of the SR2 Quad Enable bit.
+ *
+ * We can safely assume that when the Quad Enable method is
+ * set, the value of the QE bit is one, as a consequence of the
+ * nor->flash.quad_enable() call.
+ *
+ * We can safely assume that the Quad Enable bit is present in
+ * the Status Register 2 at BIT(1). According to the JESD216
+ * revB standard, BFPT DWORDS[15], bits 22:20, the 16-bit
+ * Write Status (01h) command is available just for the cases
+ * in which the QE bit is described in SR2 at BIT(1).
+ */
+ sr_cr[1] = CR_QUAD_EN_SPAN;
+ } else {
+ sr_cr[1] = 0;
+ }
+
+ sr_cr[0] = status_new;
+
+ ret = spi_nor_write_sr(nor, sr_cr, 2);
+ if (ret)
+ return ret;
+
+ cr_written = sr_cr[1];
+
+ ret = spi_nor_read_sr(nor, &sr_cr[0]);
+ if (ret)
+ return ret;
+
+ if ((sr_cr[0] & mask) != (status_new & mask)) {
+ dev_err(nor->dev, "Read back test failed\n");
+ return -EIO;
+ }
+
+ if (nor->flags & SNOR_F_NO_READ_CR)
+ return 0;
+
+ ret = spi_nor_read_cr(nor, &sr_cr[1]);
+ if (ret)
+ return ret;
+
+ if (cr_written != sr_cr[1]) {
+ dev_err(nor->dev, "Read back test failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * spi_nor_write_sr_and_check() - Write the Status Register and ensure the bits
+ * in the mask match the written values.
+ * @nor: pointer to a 'struct spi_nor'.
+ * status_new: byte value to be written to the Status Register.
+ * mask: mask with which to check the written values.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 status_new,
+ u8 mask)
+{
+ if (nor->flags == SNOR_F_HAS_16BIT_SR)
+ return spi_nor_write_16bit_sr_and_check(nor, status_new, mask);
+
+ return spi_nor_write_sr1_and_check(nor, status_new, mask);
+}
+
static struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
{
return mtd->priv;
@@ -1492,24 +1618,6 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
return ret;
}
-/* Write status register and ensure bits in mask match written values */
-static int write_sr_and_check(struct spi_nor *nor, u8 status_new, u8 mask)
-{
- int ret;
-
- nor->bouncebuf[0] = status_new;
-
- ret = spi_nor_write_sr(nor, &nor->bouncebuf[0], 1);
- if (ret)
- return ret;
-
- ret = spi_nor_read_sr(nor, &nor->bouncebuf[0]);
- if (ret)
- return ret;
-
- return ((nor->bouncebuf[0] & mask) != (status_new & mask)) ? -EIO : 0;
-}
-
static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs,
uint64_t *len)
{
@@ -1673,7 +1781,7 @@ static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
if ((status_new & mask) < (status_old & mask))
return -EINVAL;
- return write_sr_and_check(nor, status_new, mask);
+ return spi_nor_write_sr_and_check(nor, status_new, mask);
}
/*
@@ -1758,7 +1866,7 @@ static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
if ((status_new & mask) > (status_old & mask))
return -EINVAL;
- return write_sr_and_check(nor, status_new, mask);
+ return spi_nor_write_sr_and_check(nor, status_new, mask);
}
/*
@@ -3536,19 +3644,39 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
break;
case BFPT_DWORD15_QER_SR2_BIT1_BUGGY:
+ /*
+ * Writing only one byte to the Status Register has the
+ * side-effect of clearing Status Register 2.
+ */
+ /* fall through */
case BFPT_DWORD15_QER_SR2_BIT1_NO_RD:
+ nor->flags |= SNOR_F_HAS_16BIT_SR;
+ /*
+ * Read Configuration Register (35h) instruction is not
+ * supported.
+ */
+ nor->flags |= SNOR_F_NO_READ_CR;
flash->quad_enable = spansion_no_read_cr_quad_enable;
break;
case BFPT_DWORD15_QER_SR1_BIT6:
+ nor->flags &= ~SNOR_F_HAS_16BIT_SR;
flash->quad_enable = macronix_quad_enable;
break;
case BFPT_DWORD15_QER_SR2_BIT7:
+ nor->flags &= ~SNOR_F_HAS_16BIT_SR;
flash->quad_enable = sr2_bit7_quad_enable;
break;
case BFPT_DWORD15_QER_SR2_BIT1:
+ /*
+ * JESD216 rev B or later does not specify if writing only one
+ * byte to the Status Register clears or not the Status
+ * Register 2, so let's be cautious and keep the default
+ * assumption of a 16-bit Write Status (01h) command.
+ */
+ nor->flags |= SNOR_F_HAS_16BIT_SR;
flash->quad_enable = spansion_read_cr_quad_enable;
break;
@@ -4515,6 +4643,8 @@ static void spi_nor_info_init_flash_params(struct spi_nor *nor)
flash->quad_enable = spansion_read_cr_quad_enable;
flash->set_4byte = spansion_set_4byte;
flash->setup = spi_nor_default_setup;
+ /* Default to 16-bit Write Status (01h) Command */
+ nor->flags |= SNOR_F_HAS_16BIT_SR;
/* Set SPI NOR sizes. */
flash->size = (u64)info->sector_size * info->n_sectors;
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 12961b157743..fc3a8f5209f0 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -243,6 +243,8 @@ enum spi_nor_option_flags {
SNOR_F_4B_OPCODES = BIT(6),
SNOR_F_HAS_4BAIT = BIT(7),
SNOR_F_HAS_LOCK = BIT(8),
+ SNOR_F_HAS_16BIT_SR = BIT(9),
+ SNOR_F_NO_READ_CR = BIT(10),
};
/**
--
2.9.5
More information about the Linux-aspeed
mailing list