[PATCH 1/2] dt-bindings: mfd: Add ast2600 to ASPEED LPC

[Andrew Jeffery]

On Tue, 26 Nov 2019, at 12:52, Joel Stanley wrote:
> The AST2600 has the same LPC layout as previous generation SoCs.
> 
> Signed-off-by: Joel Stanley <joel at jms.id.au>
> ---
>  Documentation/devicetree/bindings/mfd/aspeed-lpc.txt | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt 
> b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> index 86446074e206..bef07c3b1a3e 100644
> --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> @@ -46,6 +46,7 @@ Required properties
>  - compatible:	One of:
>  		"aspeed,ast2400-lpc", "simple-mfd"
>  		"aspeed,ast2500-lpc", "simple-mfd"
> +		"aspeed,ast2600-lpc", "simple-mfd"
>  
>  - reg:		contains the physical address and length values of the Aspeed
>                  LPC memory region.
> @@ -64,6 +65,7 @@ BMC Node
>  - compatible:	One of:
>  		"aspeed,ast2400-lpc-bmc"
>  		"aspeed,ast2500-lpc-bmc"
> +		"aspeed,ast2600-lpc-bmc"
>  
>  - reg:		contains the physical address and length values of the
>                  H8S/2168-compatible LPC controller memory region
> @@ -128,6 +130,7 @@ Required properties:
>  - compatible:	One of:
>  		"aspeed,ast2400-lpc-ctrl";
>  		"aspeed,ast2500-lpc-ctrl";
> +		"aspeed,ast2600-lpc-ctrl";
>  
>  - reg:		contains offset/length values of the host interface controller
>  		memory regions
> @@ -168,6 +171,7 @@ Required properties:
>  - compatible:	One of:
>  		"aspeed,ast2400-lhc";
>  		"aspeed,ast2500-lhc";
> +		"aspeed,ast2600-lhc";
>  
>  - reg:		contains offset/length values of the LHC memory regions. In the
>  		AST2400 and AST2500 there are two regions.
> @@ -187,8 +191,11 @@ state of the LPC bus. Some systems may chose to 
> modify this configuration.
>  
>  Required properties:
>  
> - - compatible:		"aspeed,ast2500-lpc-reset" or
> -			"aspeed,ast2400-lpc-reset"
> + - compatible:		One of:
> +			"aspeed,ast2400-lhc";
> +			"aspeed,ast2500-lhc";
> +			"aspeed,ast2600-lhc";

This doesn't look right, you've removed the reset compatibles. It looks like
copy/paste from the hunk before.

> +
>   - reg:			offset and length of the IP in the LHC memory region
>   - #reset-controller	indicates the number of reset cells expected
>  
> -- 
> 2.24.0
> 
>