[PATCH v3] ARM: dts: aspeed: Adding Facebook Yosemite V2 BMC

[Vijay Khemka]

On 11/25/19, 5:04 AM, "manikandan-e" <manikandan.hcl.ers.epl at gmail.com> wrote:

    The Yosemite V2 is a facebook multi-node server
    platform that host four OCP server. The BMC
    in the Yosemite V2 platorm based on AST2500 SoC.
    
    This patch adds linux device tree entry related to
    Yosemite V2 specific devices connected to BMC SoC.
Nit: comments inline. Otherwise
Reviewed-by: Vijay Khemka <vijaykhemka at fb.com>
    

    Signed-off-by: manikandan-e <manikandan.hcl.ers.epl at gmail.com>
    ---
     .../boot/dts/aspeed-bmc-facebook-yosemitev2.dts    | 151 +++++++++++++++++++++
     1 file changed, 151 insertions(+)
     create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
    
    diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
    new file mode 100644
    index 0000000..09bffcd
    --- /dev/null
    +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
    @@ -0,0 +1,151 @@
    +// SPDX-License-Identifier: GPL-2.0+
    +// Copyright (c) 2018 Facebook Inc.
    +/dts-v1/;
    +
    +#include "aspeed-g5.dtsi"
    +#include <dt-bindings/gpio/aspeed-gpio.h>
    +
    +/ {
    +	model = "Facebook Yosemitev2 BMC";
    +	compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
    +	aliases {
    +		serial4 = &uart5;
    +	};
    +	chosen {
    +		stdout-path = &uart5;
    +		bootargs = "console=ttyS4,115200 earlyprintk";
bootargs are not required as it is overwritten by uboot. And baud rate is 57600
    +	};
    +
    +	memory at 80000000 {
    +		reg = <0x80000000 0x20000000>;
    +	};
    +
    +	iio-hwmon {
    +		// VOLATAGE SENSOR
    +		compatible = "iio-hwmon";
    +		io-channels = <&adc 0> , <&adc 1> , <&adc 2> ,  <&adc 3> ,
    +		<&adc 4> , <&adc 5> , <&adc 6> ,  <&adc 7> ,
    +		<&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
    +		<&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
    +	};
    +};
    +
    +&fmc {
    +	status = "okay";
    +	flash at 0 {
    +		status = "okay";
    +		m25p,fast-read;
    +#include "openbmc-flash-layout.dtsi"
    +	};
    +};
    +
    +&spi1 {
    +	status = "okay";
    +	pinctrl-names = "default";
    +	pinctrl-0 = <&pinctrl_spi1_default>;
    +	flash at 0 {
    +		status = "okay";
    +		m25p,fast-read;
    +		label = "pnor";
    +	};
    +};
    +
    +&uart5 {
    +	// BMC Console
    +	status = "okay";
    +};
    +
    +&mac0 {
    +	status = "okay";
    +	pinctrl-names = "default";
    +	pinctrl-0 = <&pinctrl_rmii1_default>;
    +	use-ncsi;
    +};
    +
    +&adc {
    +	status = "okay";
    +        pinctrl-names = "default";
Use tab for alignment
    +	pinctrl-0 = <&pinctrl_adc0_default
    +			&pinctrl_adc1_default
    +			&pinctrl_adc2_default
    +			&pinctrl_adc3_default
    +			&pinctrl_adc4_default
    +			&pinctrl_adc5_default
    +			&pinctrl_adc6_default
    +			&pinctrl_adc7_default
    +			&pinctrl_adc8_default
    +			&pinctrl_adc9_default
    +			&pinctrl_adc10_default
    +			&pinctrl_adc11_default
    +			&pinctrl_adc12_default
    +			&pinctrl_adc13_default
    +			&pinctrl_adc14_default
    +			&pinctrl_adc15_default>;
    +};
    +
    +&i2c8 {
    +	status = "okay";
    +	//FRU EEPROM
    +	eeprom at 51 {
    +		compatible = "atmel,24c64";
    +		reg = <0x51>;
    +		pagesize = <32>;
    +	};
    +};
    +
    +&i2c9 {
    +	status = "okay";
    +	tmp421 at 4e {
    +	//INLET TEMP
    +		compatible = "ti,tmp421";
    +		reg = <0x4e>;
    +	};
    +	//OUTLET TEMP
    +	tmp421 at 4f {
    +		compatible = "ti,tmp421";
    +		reg = <0x4f>;
    +	};
    +};
    +
    +&i2c10 {
    +	status = "okay";
    +	//HSC
    +	adm1278 at 40 {
    +		compatible = "adi,adm1278";
    +		reg = <0x40>;
    +	};
    +};
    +
    +&i2c11 {
    +	status = "okay";
    +	//MEZZ_TEMP_SENSOR
    +	tmp421 at 1f {
    +		compatible = "ti,tmp421";
    +		reg = <0x1f>;
    +	};
    +};
    +
    +&i2c12 {
    +	status = "okay";
    +	//MEZZ_FRU
    +	eeprom at 51 {
    +		compatible = "atmel,24c64";
    +		reg = <0x51>;
    +		pagesize = <32>;
    +	};
    +};
    +
    +&pwm_tacho {
    +	status = "okay";
    +	//FSC
    +	pinctrl-names = "default";
    +	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
    +	fan at 0 {
    +		reg = <0x00>;
    +		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
    +	};
    +	fan at 1 {
    +		reg = <0x01>;
    +		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
    +	};
    +};
    -- 
    2.7.4