[PATCH] ARM: dts: aspeed: Adding Facebook Yosemite V2 BMC

[Manikandan]

Hi Andrew/Vijay,

Thanks for the review .

The following changes done in dts and tested in Facebook Yosemite V2 BMC platform,
  1. LPC feature removed as not supported .
  2. VUART feature removed as not supported.
  3. Host UART feature removed as not in the current scope.
  4. ADC pinctrl details added in dts.

Thanks
Mani.E

On Wed, Nov 20, 2019 at 06:50:15AM +0000, Vijay Khemka wrote:
> 
> 
> On 11/19/19, 9:56 PM, "Linux-aspeed on behalf of Andrew Jeffery" <linux-aspeed-bounces+vijaykhemka=fb.com at lists.ozlabs.org on behalf of andrew at aj.id.au> wrote:
> 
>     
>     
>     On Mon, 18 Nov 2019, at 23:07, manikandan-e wrote:
>     > The Yosemite V2 is a facebook multi-node server
>     > platform that host four OCP server. The BMC
>     > in the Yosemite V2 platorm based on AST2500 SoC.
>     > 
>     > This patch adds linux device tree entry related to
>     > Yosemite V2 specific devices connected to BMC SoC.
>     > 
>     > Signed-off-by: manikandan-e <manikandan.hcl.ers.epl at gmail.com>
>     > ---
>     >  .../boot/dts/aspeed-bmc-facebook-yosemitev2.dts    | 170 +++++++++++++++++++++
>     >  1 file changed, 170 insertions(+)
>     >  create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
>     > 
>     > diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts 
>     > b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
>     > new file mode 100644
>     > index 0000000..46a285a
>     > --- /dev/null
>     > +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
>     > @@ -0,0 +1,170 @@
>     > +// SPDX-License-Identifier: GPL-2.0+
>     > +// Copyright (c) 2018 Facebook Inc.
>     > +// Author:
>     > +/dts-v1/;
>     > +
>     > +#include "aspeed-g5.dtsi"
>     > +#include <dt-bindings/gpio/aspeed-gpio.h>
>     > +
>     > +/ {
>     > +	model = "Facebook Yosemitev2 BMC";
>     > +	compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
>     > +	aliases {
>     > +		serial0 = &uart1;
>     > +		serial4 = &uart5;
>     > +	};
>     > +	chosen {
>     > +		stdout-path = &uart5;
>     > +		bootargs = "console=ttyS4,115200 earlyprintk";
>     > +	};
>     > +
>     > +	memory at 80000000 {
>     > +		reg = <0x80000000 0x20000000>;
>     > +	};
>     > +
>     > +	iio-hwmon {
>     > +		// VOLATAGE SENSOR
>     > +		compatible = "iio-hwmon";
>     > +		io-channels = <&adc 0> , <&adc 1> , <&adc 2> ,  <&adc 3> ,
>     > +		<&adc 4> , <&adc 5> , <&adc 6> ,  <&adc 7> ,
>     > +		<&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
>     > +		<&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
>     > +	};
>     > +};
>     > +
>     > +&fmc {
>     > +	status = "okay";
>     > +	flash at 0 {
>     > +		status = "okay";
>     > +		m25p,fast-read;
>     > +#include "openbmc-flash-layout.dtsi"
>     > +	};
>     > +};
>     > +
>     > +&spi1 {
>     > +	status = "okay";
>     > +	pinctrl-names = "default";
>     > +	pinctrl-0 = <&pinctrl_spi1_default>;
>     > +	flash at 0 {
>     > +		status = "okay";
>     > +		m25p,fast-read;
>     > +		label = "pnor";
>     > +	};
>     > +};
>     > +
>     > +&lpc_snoop {
>     > +	status = "okay";
>     > +	snoop-ports = <0x80>;
>     > +};
> No lpc in Yosemite so please remove.
> 
>     > +
>     > +&lpc_ctrl {
>     > +	// Enable lpc clock
>     > +	status = "okay";
> Same here remove.
>     
>     Something I'm intending to fix in the devicetrees using LPC is to hog
>     the pins in the pinctrl node. You should consider doing the same here.
>     
>     > +};
>     > +
>     > +&vuart {
>     > +	// VUART Host Console
>     > +	status = "okay";
>     > +};
> No Vuart.
> 
>     > +
>     > +&uart1 {
>     > +	// Host Console
>     > +	status = "okay";
>     > +	pinctrl-names = "default";
>     > +	pinctrl-0 = <&pinctrl_txd1_default
>     > +		     &pinctrl_rxd1_default>;
>     > +};
>     > +
>     > +&uart2 {
>     > +	// SoL Host Console
>     > +	status = "okay";
> 
> uart1-4 are all assigned for 4 multiple hosts so define accordingly.  
>     
>     Also needs pinctrl configuration.
>     
>     > +};
>     > +
>     > +&uart3 {
>     > +	// SoL BMC Console
>     > +	status = "okay";
>     
>     Again needs pinctrl.
>     
>     > +};
>     > +
>     > +&uart5 {
>     > +	// BMC Console
>     > +	status = "okay";
>     > +};
>     > +
>     > +&mac0 {
>     > +	status = "okay";
>     > +
>     > +	pinctrl-names = "default";
>     > +	pinctrl-0 = <&pinctrl_rmii1_default>;
>     > +	use-ncsi;
>     > +};
>     > +
>     > +&adc {
>     > +	status = "okay";
>     
>     Strongly suggest adding the pinctrl properties here to ensure
>     exclusive access for the ADC pins.
>     
>     Otherwise it looks reasonable.
>     
>     Andrew
>     
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-ARM-dts-aspeed-Adding-Facebook-Yosemite-V2-BMC.patch
Type: text/x-diff
Size: 3692 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linux-aspeed/attachments/20191121/f190d653/attachment-0001.patch>