[PATCH] ARM: dts: aspeed: Adding Facebook Yosemite V2 BMC

[Andrew Jeffery]

On Mon, 18 Nov 2019, at 23:07, manikandan-e wrote:
> The Yosemite V2 is a facebook multi-node server
> platform that host four OCP server. The BMC
> in the Yosemite V2 platorm based on AST2500 SoC.
> 
> This patch adds linux device tree entry related to
> Yosemite V2 specific devices connected to BMC SoC.
> 
> Signed-off-by: manikandan-e <manikandan.hcl.ers.epl at gmail.com>
> ---
>  .../boot/dts/aspeed-bmc-facebook-yosemitev2.dts    | 170 +++++++++++++++++++++
>  1 file changed, 170 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
> 
> diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts 
> b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
> new file mode 100644
> index 0000000..46a285a
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
> @@ -0,0 +1,170 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright (c) 2018 Facebook Inc.
> +// Author:
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> +	model = "Facebook Yosemitev2 BMC";
> +	compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
> +	aliases {
> +		serial0 = &uart1;
> +		serial4 = &uart5;
> +	};
> +	chosen {
> +		stdout-path = &uart5;
> +		bootargs = "console=ttyS4,115200 earlyprintk";
> +	};
> +
> +	memory at 80000000 {
> +		reg = <0x80000000 0x20000000>;
> +	};
> +
> +	iio-hwmon {
> +		// VOLATAGE SENSOR
> +		compatible = "iio-hwmon";
> +		io-channels = <&adc 0> , <&adc 1> , <&adc 2> ,  <&adc 3> ,
> +		<&adc 4> , <&adc 5> , <&adc 6> ,  <&adc 7> ,
> +		<&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
> +		<&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
> +	};
> +};
> +
> +&fmc {
> +	status = "okay";
> +	flash at 0 {
> +		status = "okay";
> +		m25p,fast-read;
> +#include "openbmc-flash-layout.dtsi"
> +	};
> +};
> +
> +&spi1 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_spi1_default>;
> +	flash at 0 {
> +		status = "okay";
> +		m25p,fast-read;
> +		label = "pnor";
> +	};
> +};
> +
> +&lpc_snoop {
> +	status = "okay";
> +	snoop-ports = <0x80>;
> +};
> +
> +&lpc_ctrl {
> +	// Enable lpc clock
> +	status = "okay";

Something I'm intending to fix in the devicetrees using LPC is to hog
the pins in the pinctrl node. You should consider doing the same here.

> +};
> +
> +&vuart {
> +	// VUART Host Console
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	// Host Console
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_txd1_default
> +		     &pinctrl_rxd1_default>;
> +};
> +
> +&uart2 {
> +	// SoL Host Console
> +	status = "okay";

Also needs pinctrl configuration.

> +};
> +
> +&uart3 {
> +	// SoL BMC Console
> +	status = "okay";

Again needs pinctrl.

> +};
> +
> +&uart5 {
> +	// BMC Console
> +	status = "okay";
> +};
> +
> +&mac0 {
> +	status = "okay";
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_rmii1_default>;
> +	use-ncsi;
> +};
> +
> +&adc {
> +	status = "okay";

Strongly suggest adding the pinctrl properties here to ensure
exclusive access for the ADC pins.

Otherwise it looks reasonable.

Andrew