[PATCH] Revert "gpio: use new gpio_set_config() helper in more places"
Bartosz Golaszewski
brgl at bgdev.pl
Wed Mar 27 19:40:55 AEDT 2019
wt., 26 mar 2019 o 19:06 Bartosz Golaszewski
<bgolaszewski at baylibre.com> napisał(a):
>
> wt., 26 mar 2019 o 05:50 Andrew Jeffery <andrew at aj.id.au> napisał(a):
> >
> > gpio-aspeed implements support for PIN_CONFIG_INPUT_DEBOUNCE. As of
> > v5.1-rc1 we're seeing the following when booting a Romulus BMC kernel:
> >
> > > [ 21.373137] ------------[ cut here ]------------
> > > [ 21.374545] WARNING: CPU: 0 PID: 1 at drivers/gpio/gpio-aspeed.c:834 unregister_allocated_timer+0x38/0x94
> > > [ 21.376181] No timer allocated to offset 74
> > > [ 21.377672] CPU: 0 PID: 1 Comm: swapper Not tainted 5.1.0-rc1-dirty #6
> > > [ 21.378800] Hardware name: Generic DT based system
> > > [ 21.379965] Backtrace:
> > > [ 21.381024] [<80107d44>] (dump_backtrace) from [<80107f78>] (show_stack+0x20/0x24)
> > > [ 21.382713] r7:8038b720 r6:00000009 r5:00000000 r4:87897c64
> > > [ 21.383815] [<80107f58>] (show_stack) from [<80656398>] (dump_stack+0x20/0x28)
> > > [ 21.385042] [<80656378>] (dump_stack) from [<80115f1c>] (__warn.part.3+0xb4/0xdc)
> > > [ 21.386253] [<80115e68>] (__warn.part.3) from [<80115fb0>] (warn_slowpath_fmt+0x6c/0x90)
> > > [ 21.387471] r6:00000342 r5:807f8758 r4:80a07008
> > > [ 21.388278] [<80115f48>] (warn_slowpath_fmt) from [<8038b720>] (unregister_allocated_timer+0x38/0x94)
> > > [ 21.389809] r3:0000004a r2:807f8774
> > > [ 21.390526] r7:00000000 r6:0000000a r5:60000153 r4:0000004a
> > > [ 21.391601] [<8038b6e8>] (unregister_allocated_timer) from [<8038baac>] (aspeed_gpio_set_config+0x330/0x48c)
> > > [ 21.393248] [<8038b77c>] (aspeed_gpio_set_config) from [<803840b0>] (gpiod_set_debounce+0xe8/0x114)
> > > [ 21.394745] r10:82ee2248 r9:00000000 r8:87b63a00 r7:00001388 r6:87947320 r5:80729310
> > > [ 21.396030] r4:879f64a0
> > > [ 21.396499] [<80383fc8>] (gpiod_set_debounce) from [<804b4350>] (gpio_keys_probe+0x69c/0x8e0)
> > > [ 21.397715] r7:845d94b8 r6:00000001 r5:00000000 r4:87b63a1c
> > > [ 21.398618] [<804b3cb4>] (gpio_keys_probe) from [<8040eeec>] (platform_dev_probe+0x44/0x80)
> > > [ 21.399834] r10:00000003 r9:80a3a8b0 r8:00000000 r7:00000000 r6:80a7f9dc r5:80a3a8b0
> > > [ 21.401163] r4:8796bc10
> > > [ 21.401634] [<8040eea8>] (platform_drv_probe) from [<8040d0d4>] (really_probe+0x208/0x3dc)
> > > [ 21.402786] r5:80a7f8d0 r4:8796bc10
> > > [ 21.403547] [<8040cecc>] (really_probe) from [<8040d7a4>] (driver_probe_device+0x130/0x170)
> > > [ 21.404744] r10:0000007b r9:8093683c r8:00000000 r7:80a07008 r6:80a3a8b0 r5:8796bc10
> > > [ 21.405854] r4:80a3a8b0
> > > [ 21.406324] [<8040d674>] (driver_probe_device) from [<8040da8c>] (device_driver_attach+0x68/0x70)
> > > [ 21.407568] r9:8093683c r8:00000000 r7:80a07008 r6:80a3a8b0 r5:00000000 r4:8796bc10
> > > [ 21.408877] [<8040da24>] (device_driver_attach) from [<8040db14>] (__driver_attach+0x80/0x150)
> > > [ 21.410327] r7:80a07008 r6:8796bc10 r5:00000001 r4:80a3a8b0
> > > [ 21.411294] [<8040da94>] (__driver_attach) from [<8040b20c>] (bus_for_each_dev+0x80/0xc4)
> > > [ 21.412641] r7:80a07008 r6:8040da94 r5:80a3a8b0 r4:87966f30
> > > [ 21.413580] [<8040b18c>] (bus_for_each_dev) from [<8040dc0c>] (driver_attach+0x28/0x30)
> > > [ 21.414943] r7:00000000 r6:87b411e0 r5:80a33fc8 r4:80a3a8b0
> > > [ 21.415927] [<8040dbe4>] (driver_attach) from [<8040bbf0>] (bus_add_driver+0x14c/0x200)
> > > [ 21.417289] [<8040baa4>] (bus_add_driver) from [<8040e2b4>] (driver_register+0x84/0x118)
> > > [ 21.418652] r7:80a60ae0 r6:809226b8 r5:80a07008 r4:80a3a8b0
> > > [ 21.419652] [<8040e230>] (driver_register) from [<8040fc28>] (__platform_driver_register+0x3c/0x50)
> > > [ 21.421193] r5:80a07008 r4:809525f8
> > > [ 21.421990] [<8040fbec>] (__platform_driver_register) from [<809226d8>] (gpio_keys_init+0x20/0x28)
> > > [ 21.423447] [<809226b8>] (gpio_keys_init) from [<8090128c>] (do_one_initcall+0x80/0x180)
> > > [ 21.424886] [<8090120c>] (do_one_initcall) from [<80901538>] (kernel_init_freeable+0x1ac/0x26c)
> > > [ 21.426354] r8:80a60ae0 r7:80a60ae0 r6:8093685c r5:00000008 r4:809525f8
> > > [ 21.427579] [<8090138c>] (kernel_init_freeable) from [<8066d9a0>] (kernel_init+0x18/0x11c)
> > > [ 21.428819] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:8066d988
> > > [ 21.429947] r4:00000000
> > > [ 21.430415] [<8066d988>] (kernel_init) from [<801010e8>] (ret_from_fork+0x14/0x2c)
> > > [ 21.431666] Exception stack(0x87897fb0 to 0x87897ff8)
> > > [ 21.432877] 7fa0: 00000000 00000000 00000000 00000000
> > > [ 21.434446] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> > > [ 21.436052] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> > > [ 21.437308] r5:8066d988 r4:00000000
> > > [ 21.438102] ---[ end trace d7d7ac3a80567d0e ]---
> >
> > We only hit unregister_allocated_timer() if the argument to
> > aspeed_gpio_set_config() is 0, but we can't be calling through
> > gpiod_set_debounce() from gpio_keys_probe() unless the gpio-keys button has a
> > non-zero debounce interval.
> >
> > Commit 6581eaf0e890 ("gpio: use new gpio_set_config() helper in more places")
> > spreads the use of gpio_set_config() to the debounce and transitory
> > state configuration paths. The implementation of gpio_set_config() is:
> >
> > > static int gpio_set_config(struct gpio_chip *gc, unsigned offset,
> > > enum pin_config_param mode)
> > > {
> > > unsigned long config = { PIN_CONF_PACKED(mode, 0) };
> > >
> > > return gc->set_config ? gc->set_config(gc, offset, config) : -ENOTSUPP;
> > > }
> >
> > Here it packs its own config value with a fixed argument of 0; this is
> > incorrect behaviour for implementing the debounce and transitory functions, and
> > the debounce and transitory gpio_set_config() call-sites now have an undetected
> > type mismatch as they both already pack their own config parameter (i.e. what
> > gets passed is not an `enum pin_config_param`). Indeed this can be seen in the
> > small diff for 6581eaf0e890:
> >
> > > diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> > > index de595fa31a1a..1f239aac43df 100644
> > > --- a/drivers/gpio/gpiolib.c
> > > +++ b/drivers/gpio/gpiolib.c
> > > @@ -2725,7 +2725,7 @@ int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
> > > }
> > >
> > > config = pinconf_to_config_packed(PIN_CONFIG_INPUT_DEBOUNCE, debounce);
> > > - return chip->set_config(chip, gpio_chip_hwgpio(desc), config);
> > > + return gpio_set_config(chip, gpio_chip_hwgpio(desc), config);
> > > }
> > > EXPORT_SYMBOL_GPL(gpiod_set_debounce);
> > >
> > > @@ -2762,7 +2762,7 @@ int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
> > > packed = pinconf_to_config_packed(PIN_CONFIG_PERSIST_STATE,
> > > !transitory);
> > > gpio = gpio_chip_hwgpio(desc);
> > > - rc = chip->set_config(chip, gpio, packed);
> > > + rc = gpio_set_config(chip, gpio, packed);
> > > if (rc == -ENOTSUPP) {
> > > dev_dbg(&desc->gdev->dev, "Persistence not supported for GPIO %d\n",
> > > gpio);
> >
> > Revert commit 6581eaf0e890 ("gpio: use new gpio_set_config() helper in
> > more places") to restore correct behaviour for gpiod_set_debounce() and
> > gpiod_set_transitory().
> >
> > Cc: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
> > Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
> > ---
> > drivers/gpio/gpiolib.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> > index 144af0733581..0495bf1d480a 100644
> > --- a/drivers/gpio/gpiolib.c
> > +++ b/drivers/gpio/gpiolib.c
> > @@ -2776,7 +2776,7 @@ int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce)
> > }
> >
> > config = pinconf_to_config_packed(PIN_CONFIG_INPUT_DEBOUNCE, debounce);
> > - return gpio_set_config(chip, gpio_chip_hwgpio(desc), config);
> > + return chip->set_config(chip, gpio_chip_hwgpio(desc), config);
> > }
> > EXPORT_SYMBOL_GPL(gpiod_set_debounce);
> >
> > @@ -2813,7 +2813,7 @@ int gpiod_set_transitory(struct gpio_desc *desc, bool transitory)
> > packed = pinconf_to_config_packed(PIN_CONFIG_PERSIST_STATE,
> > !transitory);
> > gpio = gpio_chip_hwgpio(desc);
> > - rc = gpio_set_config(chip, gpio, packed);
> > + rc = chip->set_config(chip, gpio, packed);
> > if (rc == -ENOTSUPP) {
> > dev_dbg(&desc->gdev->dev, "Persistence not supported for GPIO %d\n",
> > gpio);
> > --
> > 2.19.1
> >
>
> Thanks for the detailed explanation of the problem. Can we check for
> special cases in gpiod_set_config() and possibly pass the config
> unchanged to the underlying driver in case of debounce and transitory
> options?
>
> Bart
After giving it a second thought and seeing that Thomas is ok with
reverting it, I applied the patch for fixes.
Bart
More information about the Linux-aspeed
mailing list