[PATCH 1/8] dt-bindings: pinctrl: aspeed: Split bindings document in two
Joel Stanley
joel at jms.id.au
Thu Jun 27 13:32:06 AEST 2019
On Wed, 26 Jun 2019 at 07:15, Andrew Jeffery <andrew at aj.id.au> wrote:
>
> Have one for each of the AST2400 and AST2500. The only thing that was
> common was the fact that both support ASPEED BMC SoCs.
>
> Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
> ---
> .../pinctrl/aspeed,ast2400-pinctrl.txt | 80 +++++++++++++++++++
> ...-aspeed.txt => aspeed,ast2500-pinctrl.txt} | 63 ++-------------
> 2 files changed, 85 insertions(+), 58 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.txt
> rename Documentation/devicetree/bindings/pinctrl/{pinctrl-aspeed.txt => aspeed,ast2500-pinctrl.txt} (66%)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.txt
> new file mode 100644
> index 000000000000..67e0325ccf2e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.txt
> @@ -0,0 +1,80 @@
> +=============================
> +Aspeed AST2400 Pin Controller
> +=============================
> +
> +Required properties for the AST2400:
> +- compatible : Should be one of the following:
> + "aspeed,ast2400-pinctrl"
> + "aspeed,g4-pinctrl"
> +
> +The pin controller node should be the child of a syscon node with the required
> +property:
> +
> +- compatible : Should be one of the following:
> + "aspeed,ast2400-scu", "syscon", "simple-mfd"
> + "aspeed,g4-scu", "syscon", "simple-mfd"
I think we can use this as an opportunity to drop the unused g4-scu
compatible from the bindings. Similarly for the g5.
Acked-by: Joel Stanley <joel at jms.id.au>
> +
> +Refer to the the bindings described in
> +Documentation/devicetree/bindings/mfd/syscon.txt
> +
> +Subnode Format
> +==============
> +
> +The required properties of pinmux child nodes are:
> +- function: the mux function to select
> +- groups : the list of groups to select with this function
> +
> +Required properties of pinconf child nodes are:
> +- groups: A list of groups to select (either this or "pins" must be
> + specified)
> +- pins : A list of ball names as strings, eg "D14" (either this or "groups"
> + must be specified)
> +
> +Optional properties of pinconf child nodes are:
> +- bias-disable : disable any pin bias
> +- bias-pull-down: pull down the pin
> +- drive-strength: sink or source at most X mA
> +
> +Definitions are as specified in
> +Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt, with any
> +further limitations as described above.
> +
> +For pinmux, each mux function has only one associated pin group. Each group is
> +named by its function. The following values for the function and groups
> +properties are supported:
> +
> +ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
> +ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT EXTRST FLACK FLBUSY FLWP GPID GPID0 GPID2
> +GPID4 GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4
> +I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCRST LPCSMI MAC1LINK MAC2LINK MDIO1
> +MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4
> +NDTR1 NDTR2 NDTR3 NDTR4 NDTS4 NRI1 NRI2 NRI3 NRI4 NRTS1 NRTS2 NRTS3 OSCCLK PWM0
> +PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1
> +ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK
> +SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ
> +SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4
> +TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USB11D1 USB11H2 USB2D1
> +USB2H1 USBCKI VGABIOS_ROM VGAHS VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1
> +WDTRST2
> +
> +Example
> +=======
> +
> +syscon: scu at 1e6e2000 {
> + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
> + reg = <0x1e6e2000 0x1a8>;
> +
> + pinctrl: pinctrl {
> + compatible = "aspeed,g4-pinctrl";
> +
> + pinctrl_i2c3_default: i2c3_default {
> + function = "I2C3";
> + groups = "I2C3";
> + };
> +
> + pinctrl_gpioh0_unbiased_default: gpioh0 {
> + pins = "A8";
> + bias-disable;
> + };
> + };
> +};
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.txt
> similarity index 66%
> rename from Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> rename to Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.txt
> index 3b7266c7c438..2f16e401338a 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.txt
> @@ -1,14 +1,6 @@
> -======================
> -Aspeed Pin Controllers
> -======================
> -
> -The Aspeed SoCs vary in functionality inside a generation but have a common mux
> -device register layout.
> -
> -Required properties for g4:
> -- compatible : Should be one of the following:
> - "aspeed,ast2400-pinctrl"
> - "aspeed,g4-pinctrl"
> +=============================
> +Aspeed AST2500 Pin Controller
> +=============================
>
> Required properties for g5:
> - compatible : Should be one of the following:
> @@ -23,8 +15,6 @@ The pin controller node should be the child of a syscon node with the required
> property:
>
> - compatible : Should be one of the following:
> - "aspeed,ast2400-scu", "syscon", "simple-mfd"
> - "aspeed,g4-scu", "syscon", "simple-mfd"
> "aspeed,ast2500-scu", "syscon", "simple-mfd"
> "aspeed,g5-scu", "syscon", "simple-mfd"
>
> @@ -57,24 +47,6 @@ For pinmux, each mux function has only one associated pin group. Each group is
> named by its function. The following values for the function and groups
> properties are supported:
>
> -aspeed,ast2400-pinctrl, aspeed,g4-pinctrl:
> -
> -ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
> -ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT EXTRST FLACK FLBUSY FLWP GPID GPID0 GPID2
> -GPID4 GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4
> -I2C5 I2C6 I2C7 I2C8 I2C9 LPCPD LPCPME LPCRST LPCSMI MAC1LINK MAC2LINK MDIO1
> -MDIO2 NCTS1 NCTS2 NCTS3 NCTS4 NDCD1 NDCD2 NDCD3 NDCD4 NDSR1 NDSR2 NDSR3 NDSR4
> -NDTR1 NDTR2 NDTR3 NDTR4 NDTS4 NRI1 NRI2 NRI3 NRI4 NRTS1 NRTS2 NRTS3 OSCCLK PWM0
> -PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7 RGMII1 RGMII2 RMII1 RMII2 ROM16 ROM8 ROMCS1
> -ROMCS2 ROMCS3 ROMCS4 RXD1 RXD2 RXD3 RXD4 SALT1 SALT2 SALT3 SALT4 SD1 SD2 SGPMCK
> -SGPMI SGPMLD SGPMO SGPSCK SGPSI0 SGPSI1 SGPSLD SIOONCTRL SIOPBI SIOPBO SIOPWREQ
> -SIOPWRGD SIOS3 SIOS5 SIOSCI SPI1 SPI1DEBUG SPI1PASSTHRU SPICS1 TIMER3 TIMER4
> -TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2 TXD3 TXD4 UART6 USB11D1 USB11H2 USB2D1
> -USB2H1 USBCKI VGABIOS_ROM VGAHS VGAVS VPI18 VPI24 VPI30 VPO12 VPO24 WDTRST1
> -WDTRST2
> -
> -aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
> -
> ACPI ADC0 ADC1 ADC10 ADC11 ADC12 ADC13 ADC14 ADC15 ADC2 ADC3 ADC4 ADC5 ADC6
> ADC7 ADC8 ADC9 BMCINT DDCCLK DDCDAT ESPI FWSPICS1 FWSPICS2 GPID0 GPID2 GPID4
> GPID6 GPIE0 GPIE2 GPIE4 GPIE6 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6
> @@ -90,33 +62,8 @@ SPI2CS1 SPI2MISO SPI2MOSI TIMER3 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8 TXD1 TXD2
> TXD3 TXD4 UART6 USB11BHID USB2AD USB2AH USB2BD USB2BH USBCKI VGABIOSROM VGAHS
> VGAVS VPI24 VPO WDTRST1 WDTRST2
>
> -Examples
> -========
> -
> -g4 Example
> -----------
> -
> -syscon: scu at 1e6e2000 {
> - compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
> - reg = <0x1e6e2000 0x1a8>;
> -
> - pinctrl: pinctrl {
> - compatible = "aspeed,g4-pinctrl";
> -
> - pinctrl_i2c3_default: i2c3_default {
> - function = "I2C3";
> - groups = "I2C3";
> - };
> -
> - pinctrl_gpioh0_unbiased_default: gpioh0 {
> - pins = "A8";
> - bias-disable;
> - };
> - };
> -};
> -
> -g5 Example
> -----------
> +Example
> +=======
>
> ahb {
> apb {
> --
> 2.20.1
>
More information about the Linux-aspeed
mailing list