[PATCH] [PATCH v1] ARM: dts: aspeed: Adding Lenovo Hr855xg2 BMC
Andrew Peng
pengms1 at lenovo.com
Tue Jun 25 16:38:16 AEST 2019
Initial introduction of Lenovo Hr855xg2 family equipped with
Aspeed 2500 BMC SoC. Hr855xg2 is a x86 server development kit
with a ASPEED ast2500 BMC manufactured by Lenovo.
Specifically, This adds the Hr855xg2 platform device tree file
used by the Hr855xg2 BMC machines.
This also adds an entry of Hr855xg2 device tree file in Makefile
Signed-off-by: Andrew Peng <pengms1 at lenovo.com>
Signed-off-by: Yonghui Liu <liuyh21 at lenovo.com>
Signed-off-by: Lisa Liu <liuyj19 at lenovo.com>
Signed-off-by: Harry Sung <hsung1 at lenovo.com>
Signed-off-by: Derek Lin <dlin23 at lenovo.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts | 687 +++++++++++++++++++++++
2 files changed, 688 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index dab2914f..d874777 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1269,6 +1269,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-intel-s2600wf.dtb \
+ aspeed-bmc-lenovo-hr855xg2.dtb \
aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
new file mode 100644
index 0000000..d8dbf3a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
@@ -0,0 +1,687 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Lenovo Hr855xg2 platform
+ *
+ * Copyright (C) 2019-present Lenovo
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "HR855XG2 BMC";
+ compatible = "lenovo,hr855xg2-bmc", "aspeed,ast2500";
+
+ aliases {
+ i2c14 = &i2c_riser1;
+ i2c15 = &i2c_riser2;
+ i2c16 = &i2c_riser3;
+ i2c17 = &i2c_M2;
+ i2c18 = &channel_0;
+ i2c19 = &channel_1;
+ i2c20 = &channel_2;
+ i2c21 = &channel_3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region at 98000000 {
+ no-map;
+ reg = <0x98000000 0x00100000>; /* 1M */
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ };
+
+ fault {
+ gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>,<&adc 11>,
+ <&adc 12>,<&adc 13>,<&adc 14>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 15>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+ /* Rear RS-232 connector */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default
+ &pinctrl_rxd2_default
+ &pinctrl_nrts2_default
+ &pinctrl_ndtr2_default
+ &pinctrl_ndsr2_default
+ &pinctrl_ncts2_default
+ &pinctrl_ndcd2_default
+ &pinctrl_nri2_default>;
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&ibt {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc{
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
+
+&peci0 {
+ status = "okay";
+
+ peci-client at 30 {
+ compatible = "intel,peci-client";
+ reg = <0x30>;
+ };
+
+ peci-client at 31 {
+ compatible = "intel,peci-client";
+ reg = <0x31>;
+ };
+
+ peci-client at 32 {
+ compatible = "intel,peci-client";
+ reg = <0x32>;
+ };
+
+ peci-client at 33 {
+ compatible = "intel,peci-client";
+ reg = <0x33>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ i2c-switch at 70 {
+ compatible = "nxp,pca9545";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c_riser1: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c_riser2: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c_riser3: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c_M2: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ bus-frequency = <90000>;
+ HotSwap at 10 {
+ compatible = "adm1272";
+ reg = <0x10>;
+ };
+
+ VR at 45 {
+ compatible = "pmbus";
+ reg = <0x45>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+ i2c-switch at 70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel_0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ channel_1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ channel_2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ channel_3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+ /* temp1 */
+ tmp75 at 49 {
+ compatible = "national,lm75";
+ reg = <0x49>;
+ };
+
+ /* temp2 */
+ tmp75 at 4d {
+ compatible = "national,lm75";
+ reg = <0x4d>;
+ };
+
+ eeprom at 54 {
+ compatible = "atmel,24c256";
+ reg = <0x54>;
+ pagesize = <16>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default
+ &pinctrl_pwm5_default
+ &pinctrl_pwm6_default
+ &pinctrl_pwm7_default>;
+
+ fan at 0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan at 1 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan at 2 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan at 3 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan at 4 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan at 5 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan at 6 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan at 7 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+
+ fan at 8 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+ };
+
+ fan at 9 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan at 10 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+ };
+
+ fan at 11 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+ };
+
+ fan at 12 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+ };
+
+ fan at 13 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+ };
+
+ fan at 14 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+ };
+
+ fan at 15 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+ };
+
+ fan at 16 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+ };
+};
+
+&gpio {
+
+ pin_gpio_a1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "BMC_EMMC_RST_N";
+ };
+
+ pin_gpio_a3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "PCH_PWROK_BMC_FPGA";
+ };
+
+ pin_gpio_b5 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+ };
+
+ pin_gpio_b7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "CPU_SM_WP";
+ };
+
+ pin_gpio_e0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "PDB_PSU_SEL";
+ };
+
+ pin_gpio_e2 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "LOCATOR_LED_N";
+ };
+
+ pin_gpio_e5 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "FM_BMC_DBP_PRESENT_R1_N";
+ };
+
+ pin_gpio_e6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_ME_SECURITY_OVERRIDE_N";
+ };
+
+ pin_gpio_f0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "IRQ_BMC_PCH_NMI_R";
+ };
+
+ pin_gpio_f1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "CPU2_PROCDIS_BMC_N";
+ };
+
+ pin_gpio_f2 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "RM_THROTTLE_EN_N";
+ };
+
+ pin_gpio_f3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "FM_PMBUS_ALERT_B_EN";
+ };
+
+ pin_gpio_f4 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_FORCE_NM_THROTTLE_N";
+ };
+
+ pin_gpio_f6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "FM_BMC_CPU_PWR_DEBUG_N";
+ };
+
+ pin_gpio_g7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_PCIE_I2C_MUX_RST_N";
+ };
+
+ pin_gpio_h6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "FM_BMC_DBP_PRESENT_R2_N";
+ };
+
+ pin_gpio_i3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "SPI_BMC_BIOS_WP_N";
+ };
+
+ pin_gpio_j1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_USB_SEL";
+ };
+
+ pin_gpio_j2 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PDB_SMB_RST_N";
+ };
+
+ pin_gpio_j3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "SPI_BMC_BIOS_HOLD_N";
+ };
+
+ pin_gpio_l0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PDB_FAN_TACH_SEL";
+ };
+
+ pin_gpio_l1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "SYS_RESET_BMC_FPGA_N";
+ };
+
+ pin_gpio_l4 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "FM_EFUSE_FAN_G1_EN";
+ };
+
+ pin_gpio_l5 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "FM_EFUSE_FAN_G2_EN";
+ };
+
+ pin_gpio_r6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "CPU3_PROCDIS_BMC_N";
+ };
+
+ pin_gpio_r7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+ input;
+ line-name = "CPU4_PROCDIS_BMC_N";
+ };
+
+ pin_gpio_s1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "DBP_SYSPWROK_BMC";
+ };
+
+ pin_gpio_s2 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PCH_RST_RSMRST_N";
+ };
+
+ pin_gpio_s6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_HW_STRAP_5";
+ };
+
+ pin_gpio_z3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "FM_BMC_PCH_SCI_LPC_N";
+ };
+
+ pin_gpio_aa0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "FW_PSU_ALERT_EN_N";
+ };
+
+ pin_gpio_aa4 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "DBP_CPU_PREQ_N";
+ };
+
+ pin_gpio_ab3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "BMC_WDTRST";
+ };
+
+ pin_gpio_ac6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "ESPI_BMC_ALERT_N";
+ };
+
+};
--
2.7.4
More information about the Linux-aspeed
mailing list