[patch 0/5] *** DMA based UART driver for AST2500 ***
sudheer.v
open.sudheer at gmail.com
Fri Jun 21 21:17:30 AEST 2019
From: sudheer veliseti <sudheer.open at gmail.com>
Hi,
AST2500 has dedicated Uart DMA controller which has 12 sets of
Tx and RX channels connected to UART controller directly.
Since the DMA controller have dedicated buffers and registers,
there would be little benifit in adding DMA framework overhead.
So the software for DMA controller is included within the UART driver itself.
Thanks and Regards
Sudheer.V
sudheer veliseti (5):
AST2500 DMA UART driver
build configuration for AST2500 DMA UART driver
DT nodes for AST2500 DMA UART driver
defconfig and MAINTAINERS updated for AST2500 DMA UART driver
Documentation: DT bindings AST2500 DMA UART driver
.../bindings/serial/ast2500-dma-uart.txt | 40 +
MAINTAINERS | 13 +
arch/arm/boot/dts/aspeed-ast2500-evb.dts | 21 +
arch/arm/boot/dts/aspeed-g5.dtsi | 71 +-
arch/arm/configs/aspeed_g5_defconfig | 1 +
.../tty/serial/8250/8250_ast2500_uart_dma.c | 1879 +++++++++++++++++
drivers/tty/serial/8250/Kconfig | 35 +-
drivers/tty/serial/8250/Makefile | 1 +
8 files changed, 2056 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/ast2500-dma-uart.txt
create mode 100644 drivers/tty/serial/8250/8250_ast2500_uart_dma.c
--
2.17.1
More information about the Linux-aspeed
mailing list