[PATCH 1/4] dt-bindings: net: Add aspeed,ast2600-mdio binding

[Andrew Jeffery]

The AST2600 splits out the MDIO bus controller from the MAC into its own
IP block and rearranges the register layout. Add a new binding to
describe the new hardware.

Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
---
 .../bindings/net/aspeed,ast2600-mdio.yaml     | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml

diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
new file mode 100644
index 000000000000..fa86f6438473
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/aspeed,ast2600-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2600 MDIO Controller
+
+maintainers:
+  - Andrew Jeffery <andrew at aj.id.au>
+
+description: |+
+  The ASPEED AST2600 MDIO controller is the third iteration of ASPEED's MDIO
+  bus register interface, this time also separating out the controller from the
+  MAC.
+
+properties:
+  compatible:
+    const: aspeed,ast2600-mdio
+  reg:
+    maxItems: 1
+    description: The register range of the MDIO controller instance
+  "#address-cells":
+    const: 1
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^ethernet-phy@[a-f0-9]$":
+    properties:
+      reg:
+        description:
+          The MDIO bus index of the PHY
+      compatible:
+        enum:
+          - ethernet-phy-ieee802.3-c22
+          - ethernet-phy-ieee802.3-c45
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    mdio0: mdio at 1e650000 {
+            compatible = "aspeed,ast2600-mdio";
+            reg = <0x1e650000 0x8>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            status = "okay";
+
+            ethphy0: ethernet-phy at 0 {
+                    compatible = "ethernet-phy-ieee802.3-c22";
+                    reg = <0>;
+            };
+    };
-- 
2.20.1