[patch v4 5/5] Documentation: DT bindings AST2500 DMA UART driver

sudheer.v open.sudheer at gmail.com
Fri Jul 26 23:27:20 AEST 2019


From: sudheer veliseti <sudheer.open at gmail.com>

documentation for Dt bindings for DMA based UARTs in AST2500

Signed-off-by: sudheer veliseti <sudheer.open at gmail.com>
---

Changes in v4:
-
Changes in v3:
- change logs added

.../bindings/serial/ast2500-dma-uart.txt      | 43 +++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/ast2500-dma-uart.txt

diff --git a/Documentation/devicetree/bindings/serial/ast2500-dma-uart.txt b/Documentation/devicetree/bindings/serial/ast2500-dma-uart.txt
new file mode 100644
index 000000000000..6ebc60b51d4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/ast2500-dma-uart.txt
@@ -0,0 +1,43 @@
+DT Bindings DMA UART for AST25XX:
+
+node for DMA controller:
+                       ast_uart_sdma: uart_sdma at 1e79e000 {
+                               compatible = "aspeed,ast-uart-sdma";
+                               reg = <0x1e79e000 0x400>;
+                               interrupts = <50>;
+                               status = "disabled";
+                       };
+this node  doesn't binds with any driver.
+DMA controller is handled as a separate SW layer,
+and is included in the same driver.
+This DMA controller node is included in DT
+just for Register and interrupt details
+
+
+
+node for DMA-UARTS :
+
+
+Required properties:
+
+- compatible: "aspeed,ast-sdma-uart"
+- reg: The base address of the UART register bank
+- interrupts: should contain interrupt specifier.
+- clocks: Clock driving the hardware;
+- pinctrl-0 : list of pinconfigurations
+- dma-channel: channel of DMA-controller which is used
+
+Example:
+
+	dma_uart1: dma_uart1 at 1e783000{
+        compatible = "aspeed,ast-sdma-uart";
+        reg = <0x1e783000 0x1000>;
+        reg-shift = <2>;
+        interrupts = <9>;
+        clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+        dma-channel = <0>;
+        no-loopback-test;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>;
+        status = "disabled";
+        };
-- 
2.17.1



More information about the Linux-aspeed mailing list