[PATCH 2/3 v1] ARM: dts: aspeed: Add SGPIO driver
Hongwei Zhang
Hongweiz at ami.com
Thu Jul 11 00:54:31 AEST 2019
Hello Andrew,
Thanks for your review and comments, please find our inline response at below.
I will email updated driver code separately, because Outlook breaks source code's tabs.
There is one place need your more input for clarification, which is about DATA_READ/DATA_VALUE registers,
please see it at below.
Best Regards,
-- Hongwei
> From: Andrew Jeffery <andrew at aj.id.au>
> Sent: Wednesday, July 3, 2019 8:06 PM
> To: Hongwei Zhang; Bartosz Golaszewski; Joel Stanley; Linus Walleij
> Cc: linux-gpio at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-aspeed at lists.ozlabs.org;
> linux-kernel at vger.kernel.org
> Subject: Re: [PATCH 2/3 linux,dev-5.1 v1] ARM: dts: aspeed: Add SGPIO driver
>
> Hello Hongwei,
>
> As this is patch is sent to the upstream lists (linux-gpio@ etc) please drop the OpenBMC-specific
> "linux,dev-5.1" from the subject.
>
Got it but to be more specific, for the situation of mixed recipients, should I send out separate emails with
different subject line format in the future?
> Also, it looks like you may have manually added the series revision (v1).
> For the record you can make `git format-patch` do this for you with the `-v`option (e.g. if you really want
> it here, `-v 1`).
>
> On Thu, 4 Jul 2019, at 07:09, Hongwei Zhang wrote:
> > Add SGPIO driver support for Aspeed AST2500 SoC.
> >
> > Signed-off-by: Hongwei Zhang <hongweiz at ami.com>
> > ---
> > drivers/gpio/sgpio-aspeed.c | 470
> > ++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 470 insertions(+)
> > create mode 100644 drivers/gpio/sgpio-aspeed.c
> >
> > diff --git a/drivers/gpio/sgpio-aspeed.c b/drivers/gpio/sgpio-aspeed.c
> > new file mode 100644 index 0000000..108ed13
> > --- /dev/null
> > +++ b/drivers/gpio/sgpio-aspeed.c
> > @@ -0,0 +1,470 @@
> > +/*
> > + * Copyright 2019 American Megatrends International LLC.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License
> > + * as published by the Free Software Foundation; either version
> > + * 2 of the License, or (at your option) any later version.
>
> You should use the SPDX license identifier here rather than the GPL blurb, and it should be the first line
> of the file. Keep your copyright line in place though:
>
OK
> // SPDX-License-Identifier: GPL-2.0-or-later // Copyright 2019 American Megatrends International LLC.
>
> > + */
> > +
> > +#include <linux/gpio/driver.h>
> > +#include <linux/gpio/aspeed.h>
> > +#include <linux/hashtable.h>
> > +#include <linux/init.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/pinctrl/consumer.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/spinlock.h>
> > +#include <linux/string.h>
> > +
> > +#define NR_SGPIO 80
> > +
> > +struct aspeed_sgpio {
> > + struct gpio_chip chip;
> > + spinlock_t lock;
> > + void __iomem *base;
> > + int irq;
> > +};
> > +
> > +struct aspeed_sgpio_bank {
> > + uint16_t val_regs;
> > + uint16_t rdata_reg;
> > + uint16_t irq_regs;
> > + const char names[4][3];
> > +};
> > +
> > +/*
> > + * Note: The "value" register returns the input value sampled on the
> > + * line even when the GPIO is configured as an output. Since
> > + * that input goes through synchronizers, writing, then reading
> > + * back may not return the written value right away.
> > + *
> > + * The "rdata" register returns the content of the write latch
> > + * and thus can be used to read back what was last written
> > + * reliably.
> > + */
> > +
> > +static const struct aspeed_sgpio_bank aspeed_sgpio_banks[] = {
> > + {
> > + .val_regs = 0x0000,
> > + .rdata_reg = 0x0070,
> > + .irq_regs = 0x0004,
> > + .names = { "A", "B", "C", "D" },
> > + },
> > + {
> > + .val_regs = 0x001C,
> > + .rdata_reg = 0x0074,
> > + .irq_regs = 0x0020,
> > + .names = { "E", "F", "G", "H" },
> > + },
> > + {
> > + .val_regs = 0x0038,
> > + .rdata_reg = 0x0078,
> > + .irq_regs = 0x003C,
> > + .names = { "I", "J" },
> > + },
> > +};
> > +
> > +enum aspeed_sgpio_reg {
> > + reg_val,
> > + reg_rdata,
> > + reg_irq_enable,
> > + reg_irq_type0,
> > + reg_irq_type1,
> > + reg_irq_type2,
> > + reg_irq_status,
> > +};
> > +
> > +#define GPIO_VAL_VALUE 0x00
> > +#define GPIO_VAL_DIR 0x04
> > +#define GPIO_IRQ_ENABLE 0x00
> > +#define GPIO_IRQ_TYPE0 0x04
> > +#define GPIO_IRQ_TYPE1 0x08
> > +#define GPIO_IRQ_TYPE2 0x0C
> > +#define GPIO_IRQ_STATUS 0x10
> > +
> > +/* This will be resolved at compile time */ static inline void
> > +__iomem *bank_reg(struct aspeed_sgpio *gpio,
> > + const struct aspeed_sgpio_bank *bank,
> > + const enum aspeed_sgpio_reg reg) {
> > + switch (reg) {
> > + case reg_val:
> > + return gpio->base + bank->val_regs + GPIO_VAL_VALUE;
> > + case reg_rdata:
> > + return gpio->base + bank->rdata_reg;
> > + case reg_irq_enable:
> > + return gpio->base + bank->irq_regs + GPIO_IRQ_ENABLE;
> > + case reg_irq_type0:
> > + return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE0;
> > + case reg_irq_type1:
> > + return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE1;
> > + case reg_irq_type2:
> > + return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE2;
> > + case reg_irq_status:
> > + return gpio->base + bank->irq_regs + GPIO_IRQ_STATUS;
> > + }
> > + BUG_ON(1);
>
> This isn't appropriate - we shouldn't take down the kernel on a faulty peripheral access. Please change
> this to WARN().
>
- Cannot change it to WARN(), it throws build error, warning: control reaches end of non-void
function [-Wreturn-type], so I add WARN_ON() in the switch's 'default: ' case statement, and
followed with a return(gpio->base) to mute the [-Wreturn-type] compiling warning.
> > +}
> > +
> > +#define GPIO_BANK(x) ((x) >> 5)
> > +#define GPIO_OFFSET(x) ((x) & 0x1f)
> > +#define GPIO_BIT(x) BIT(GPIO_OFFSET(x))
> > +
> > +static const struct aspeed_sgpio_bank *to_bank(unsigned int offset) {
> > + unsigned int bank = GPIO_BANK(offset);
> > +
> > + WARN_ON(bank >= ARRAY_SIZE(aspeed_sgpio_banks));
> > + return &aspeed_sgpio_banks[bank];
> > +}
> > +
> > +static inline bool have_gpio(struct aspeed_sgpio *gpio, unsigned int
> > offset)
> > +{
> > + const struct aspeed_sgpio_bank *bank = to_bank(offset);
> > + unsigned int group = GPIO_OFFSET(offset) / 8;
> > +
> > + return bank->names[group][0] != '\0';
>
> Lets just drop have_gpio() altogether, it's a contiguous set of 80 GPIOs.
> At best this should just be:
>
> static inline bool have_gpio(struct aspeed_sgpio *gpio, unsigned int offset) {
> return offset < NR_SGPIO;
> }
>
> But lets just assume that we've properly configured the gpio subsystem for the controller and remove it
> completely.
>
Karthik - [Addressed] Removed have_gpio()
> > +}
> > +
> > +static int aspeed_sgpio_get(struct gpio_chip *gc, unsigned int
> > +offset) {
> > + struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
> > + const struct aspeed_sgpio_bank *bank = to_bank(offset);
> > +
> > + return !!(ioread32(bank_reg(gpio, bank, reg_val)) &
> > +GPIO_BIT(offset)); }
> > +
> > +static void __aspeed_sgpio_set(struct gpio_chip *gc, unsigned int
> > offset,
> > + int val)
>
> No need to split this out from aspeed_sgpio_set() below. Separating the implementation was necessary
> in the parallel GPIO driver for reasons that aren't relevant here.
>
Karthik - [Addressed] Merged into single API itself.
> > +{
> > + struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
> > + const struct aspeed_sgpio_bank *bank = to_bank(offset);
> > + void __iomem *addr;
> > + u32 reg;
> > +
> > + addr = bank_reg(gpio, bank, reg_val);
> > +
> > + if (val)
> > + reg |= GPIO_BIT(offset);
> > + else
> > + reg &= ~GPIO_BIT(offset);
> > +
> > + iowrite32(reg, addr);
> > +}
> > +
> > +static void aspeed_sgpio_set(struct gpio_chip *gc, unsigned int offset,
> > + int val)
> > +{
> > + struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&gpio->lock, flags);
> > +
> > + __aspeed_sgpio_set(gc, offset, val);
> > +
> > + spin_unlock_irqrestore(&gpio->lock, flags); }
> > +
> > +static int aspeed_sgpio_dir_in(struct gpio_chip *gc, unsigned int
> > offset)
> > +{
> > + /* By default all SGPIO Pins are input */
>
> Right, but with your implementation below you can never mark them as output.
>
Karthik - [Addressed] Just return success if user space try to set dir as input or output.
> > + return 0;
> > +}
> > +
> > +static int aspeed_sgpio_get_direction(struct gpio_chip *gc, unsigned
> > int offset)
> > +{
> > + /* By default all SGPIO Pins are input */
> > + return 1;
>
> As above. Given my understanding of SGPIO, I think you should be implementing both dir_in() and
> dir_out(), and capturing which state userspace "wants" the GPIO to be in, and directing reads/writes to
> the DATA_READ/DATA_VALUE registers as appropriate. There's no state we need to modify in the
> hardware, but that doesn't mean we shouldn't capture the intent of userspace at all.
>
Karthik - Just return success if user space try to set dir as input or output.
But I don't understand the point directing reads/writes to the DATA_READ/DATA_VALUE Registers.
If userspace configured GPIO as input, Then get_gpio() should return reg_rdata value?
If userspace configured GPIO as output, Then get_gpio() should return reg_val value?
Please clarify.
> > +
> > +}
> > +
> > +static inline int irqd_to_aspeed_sgpio_data(struct irq_data *d,
> > + struct aspeed_sgpio **gpio,
> > + const struct aspeed_sgpio_bank **bank,
> > + u32 *bit, int *offset)
> > +{
> > + struct aspeed_sgpio *internal;
> > +
> > + *offset = irqd_to_hwirq(d);
> > +
> > + internal = irq_data_get_irq_chip_data(d);
> > +
> > + *gpio = internal;
> > + *bank = to_bank(*offset);
> > + *bit = GPIO_BIT(*offset);
> > +
> > + return 0;
> > +}
> > +
> > +static void aspeed_sgpio_irq_ack(struct irq_data *d) {
> > + const struct aspeed_sgpio_bank *bank;
> > + struct aspeed_sgpio *gpio;
> > + unsigned long flags;
> > + void __iomem *status_addr;
> > + int rc, offset;
> > + u32 bit;
> > +
> > + rc = irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset);
> > + if (rc)
> > + return;
> > +
> > + status_addr = bank_reg(gpio, bank, reg_irq_status);
> > +
> > + spin_lock_irqsave(&gpio->lock, flags);
> > +
> > + iowrite32(bit, status_addr);
> > +
> > + spin_unlock_irqrestore(&gpio->lock, flags); }
> > +
> > +static void aspeed_sgpio_irq_set_mask(struct irq_data *d, bool set) {
> > + const struct aspeed_sgpio_bank *bank;
> > + struct aspeed_sgpio *gpio;
> > + unsigned long flags;
> > + u32 reg, bit;
> > + void __iomem *addr;
> > + int rc, offset;
> > +
> > + rc = irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset);
> > + if (rc)
> > + return;
> > +
> > + addr = bank_reg(gpio, bank, reg_irq_enable);
> > +
> > + spin_lock_irqsave(&gpio->lock, flags);
> > +
> > + reg = ioread32(addr);
> > + if (set)
> > + reg |= bit;
> > + else
> > + reg &= ~bit;
> > +
> > + iowrite32(reg, addr);
> > +
> > + spin_unlock_irqrestore(&gpio->lock, flags); }
> > +
> > +static void aspeed_sgpio_irq_mask(struct irq_data *d) {
> > + aspeed_sgpio_irq_set_mask(d, false); }
> > +
> > +static void aspeed_sgpio_irq_unmask(struct irq_data *d) {
> > + aspeed_sgpio_irq_set_mask(d, true);
> > +}
> > +
> > +static int aspeed_sgpio_set_type(struct irq_data *d, unsigned int
> > +type) {
> > + u32 type0 = 0;
> > + u32 type1 = 0;
> > + u32 type2 = 0;
> > + u32 bit, reg;
> > + const struct aspeed_sgpio_bank *bank;
> > + irq_flow_handler_t handler;
> > + struct aspeed_sgpio *gpio;
> > + unsigned long flags;
> > + void __iomem *addr;
> > + int rc, offset;
> > +
> > + rc = irqd_to_aspeed_sgpio_data(d, &gpio, &bank, &bit, &offset);
> > + if (rc)
> > + return -EINVAL;
> > +
> > + switch (type & IRQ_TYPE_SENSE_MASK) {
> > + case IRQ_TYPE_EDGE_BOTH:
> > + type2 |= bit;
> > + /* fall through */
> > + case IRQ_TYPE_EDGE_RISING:
> > + type0 |= bit;
> > + /* fall through */
> > + case IRQ_TYPE_EDGE_FALLING:
> > + handler = handle_edge_irq;
> > + break;
> > + case IRQ_TYPE_LEVEL_HIGH:
> > + type0 |= bit;
> > + /* fall through */
> > + case IRQ_TYPE_LEVEL_LOW:
> > + type1 |= bit;
> > + handler = handle_level_irq;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + spin_lock_irqsave(&gpio->lock, flags);
> > +
> > + addr = bank_reg(gpio, bank, reg_irq_type0);
> > + reg = ioread32(addr);
> > + reg = (reg & ~bit) | type0;
> > + iowrite32(reg, addr);
> > +
> > + addr = bank_reg(gpio, bank, reg_irq_type1);
> > + reg = ioread32(addr);
> > + reg = (reg & ~bit) | type1;
> > + iowrite32(reg, addr);
> > +
> > + addr = bank_reg(gpio, bank, reg_irq_type2);
> > + reg = ioread32(addr);
> > + reg = (reg & ~bit) | type2;
> > + iowrite32(reg, addr);
> > +
> > + spin_unlock_irqrestore(&gpio->lock, flags);
> > +
> > + irq_set_handler_locked(d, handler);
> > +
> > + return 0;
> > +}
> > +
> > +static void aspeed_sgpio_irq_handler(struct irq_desc *desc) {
> > + struct gpio_chip *gc = irq_desc_get_handler_data(desc);
> > + struct irq_chip *ic = irq_desc_get_chip(desc);
> > + struct aspeed_sgpio *data = gpiochip_get_data(gc);
> > + unsigned int i, p, girq;
> > + unsigned long reg;
> > +
> > + chained_irq_enter(ic, desc);
> > +
> > + for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) {
> > + const struct aspeed_sgpio_bank *bank = &aspeed_sgpio_banks[i];
> > +
> > + reg = ioread32(bank_reg(data, bank, reg_irq_status));
> > +
> > + for_each_set_bit(p, ®, 32) {
> > + girq = irq_find_mapping(gc->irq.domain, i * 32 + p);
> > + generic_handle_irq(girq);
> > + }
> > +
> > + }
> > +
> > + chained_irq_exit(ic, desc);
> > +}
> > +
> > +static struct irq_chip aspeed_sgpio_irqchip = {
> > + .name = "aspeed-sgpio",
> > + .irq_ack = aspeed_sgpio_irq_ack,
> > + .irq_mask = aspeed_sgpio_irq_mask,
> > + .irq_unmask = aspeed_sgpio_irq_unmask,
> > + .irq_set_type = aspeed_sgpio_set_type,
> > +};
> > +
> > +static int aspeed_sgpio_setup_irqs(struct aspeed_sgpio *gpio,
> > + struct platform_device *pdev)
> > +{
> > + int rc, i;
> > + const struct aspeed_sgpio_bank *bank;
> > +
> > + rc = platform_get_irq(pdev, 0);
> > + if (rc < 0)
> > + return rc;
> > +
> > + gpio->irq = rc;
> > +
> > + /* Disable IRQ and clear Interrupt status registers for all SPGIO
> > Pins. */
> > + for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) {
> > + bank = &aspeed_sgpio_banks[i];
> > + /* disable irq enable bits */
> > + iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_enable));
> > + /* clear status bits */
> > + iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_status));
> > + }
> > +
> > + rc = gpiochip_irqchip_add(&gpio->chip, &aspeed_sgpio_irqchip,
> > + 0, handle_bad_irq, IRQ_TYPE_NONE);
> > + if (rc) {
> > + dev_info(&pdev->dev, "Could not add irqchip\n");
> > + return rc;
> > + }
> > +
> > + gpiochip_set_chained_irqchip(&gpio->chip, &aspeed_sgpio_irqchip,
> > + gpio->irq, aspeed_sgpio_irq_handler);
> > +
> > + /* set IRQ settings and Enable Interrupt */
> > + for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) {
> > + bank = &aspeed_sgpio_banks[i];
> > + /* set falling or level-low irq */
> > + iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type0));
> > + /* trigger type is edge */
> > + iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type1));
> > + /* dual edge trigger mode. */
> > + iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_type2));
> > + /* enable irq */
> > + iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_enable));
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int aspeed_sgpio_request(struct gpio_chip *chip, unsigned int
> > offset)
> > +{
> > + if (!have_gpio(gpiochip_get_data(chip), offset))
> > + return -ENODEV;
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id aspeed_sgpio_of_table[] = {
> > + { .compatible = "aspeed,ast2400-sgpio", .data = NULL, },
> > + { .compatible = "aspeed,ast2500-sgpio", .data = NULL,},
>
> You can drop the assignment to data.
>
Karthik - [Addressed] dropped data parameter
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(of, aspeed_sgpio_of_table);
> > +
> > +static int __init aspeed_sgpio_probe(struct platform_device *pdev) {
> > + const struct of_device_id *gpio_id;
> > + struct aspeed_sgpio *gpio;
> > + struct resource *res;
> > + int rc, i;
> > +
> > + gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
> > + if (!gpio)
> > + return -ENOMEM;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + gpio->base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(gpio->base))
> > + return PTR_ERR(gpio->base);
> > +
> > + spin_lock_init(&gpio->lock);
> > +
> > + gpio_id = of_match_node(aspeed_sgpio_of_table, pdev->dev.of_node);
> > + if (!gpio_id)
> > + return -EINVAL;
>
> gpio_id isn't used, so you can drop the of_match_node() above.
>
Karthik - [Addressed] dropped gpio_id
> > +
> > + gpio->chip.parent = &pdev->dev;
> > + gpio->chip.ngpio = NR_SGPIO;
> > + gpio->chip.direction_input = aspeed_sgpio_dir_in;
> > + gpio->chip.direction_output = NULL;
>
> We can do outputs too - we shouldn't be omitting the direction_output callback, see the discussion
> above about dir_in()/dir_out()/get_direction()
>
Karthik - [Addressed] Added output API also.
> Andrew
>
> > + gpio->chip.get_direction = aspeed_sgpio_get_direction;
> > + gpio->chip.request = aspeed_sgpio_request;
> > + gpio->chip.free = NULL;
> > + gpio->chip.get = aspeed_sgpio_get;
> > + gpio->chip.set = aspeed_sgpio_set;
> > + gpio->chip.set_config = NULL;
> > + gpio->chip.label = dev_name(&pdev->dev);
> > + gpio->chip.base = -1;
> > +
> > + rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
> > + if (rc < 0)
> > + return rc;
> > +
> > + return aspeed_sgpio_setup_irqs(gpio, pdev); }
> > +
> > +static struct platform_driver aspeed_sgpio_driver = {
> > + .driver = {
> > + .name = KBUILD_MODNAME,
> > + .of_match_table = aspeed_sgpio_of_table,
> > + },
> > +};
> > +
> > +module_platform_driver_probe(aspeed_sgpio_driver,
> > +aspeed_sgpio_probe); MODULE_DESCRIPTION("Aspeed Serial GPIO Driver");
> > +MODULE_LICENSE("GPL");
> > --
> > 2.7.4
> >
> >
More information about the Linux-aspeed
mailing list