[PATCH v4 2/2] drivers/misc: Add Aspeed P2A control driver
Patrick Venture
venture at google.com
Thu Feb 28 12:25:21 AEDT 2019
On Wed, Feb 27, 2019 at 8:59 AM Patrick Venture <venture at google.com> wrote:
>
> The ASPEED AST2400, and AST2500 in some configurations include a
> PCI-to-AHB MMIO bridge. This bridge allows a server to read and write
> in the BMC's physical address space. This feature is especially useful
> when using this bridge to send large files to the BMC.
>
> The host may use this to send down a firmware image by staging data at a
> specific memory address, and in a coordinated effort with the BMC's
> software stack and kernel, transmit the bytes.
>
> This driver enables the BMC to unlock the PCI bridge on demand, and
> configure it via ioctl to allow the host to write bytes to an agreed
> upon location. In the primary use-case, the region to use is known
> apriori on the BMC, and the host requests this information. Once this
> request is received, the BMC's software stack will enable the bridge and
> the region and then using some software flow control (possibly via IPMI
> packets), copy the bytes down. Once the process is complete, the BMC
> will disable the bridge and unset any region involved.
>
> The default behavior of this bridge when present is: enabled and all
> regions marked read-write. This driver will fix the regions to be
> read-only and then disable the bridge entirely.
>
> The memory regions protected are:
> * BMC flash MMIO window
> * System flash MMIO windows
> * SOC IO (peripheral MMIO)
> * DRAM
>
> The DRAM region itself is all of DRAM and cannot be further specified.
> Once the PCI bridge is enabled, the host can read all of DRAM, and if
> the DRAM section is write-enabled, then it can write to all of it.
>
> Signed-off-by: Patrick Venture <venture at google.com>
> ---
> Changes for v4:
> - Added ioctl for reading back the memory-region configuration.
> - Cleaned up some unused variables.
> Changes for v3:
> - Deleted unused read and write methods.
> Changes for v2:
> - Dropped unused reads.
> - Moved call to disable bridge to before registering device.
> - Switch from using regs to using a syscon regmap. <<< IN PROGRESS
> - Updated the commit message. <<< TODO
> - Updated the bit flipped for SCU180_ENP2A
> - Dropped boolean region_specified variable.
> - Renamed p2a_ctrl in _probe to misc_ctrl per suggestion.
> - Renamed aspeed_p2a_region_search to aspeed_p2a_region_acquire
> - Updated commit message.
> ---
> drivers/misc/Kconfig | 8 +
> drivers/misc/Makefile | 1 +
> drivers/misc/aspeed-p2a-ctrl.c | 451 +++++++++++++++++++++++++++
> include/uapi/linux/aspeed-p2a-ctrl.h | 59 ++++
> 4 files changed, 519 insertions(+)
> create mode 100644 drivers/misc/aspeed-p2a-ctrl.c
> create mode 100644 include/uapi/linux/aspeed-p2a-ctrl.h
>
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index f417b06e11c5..9de1bafe5606 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -485,6 +485,14 @@ config VEXPRESS_SYSCFG
> bus. System Configuration interface is one of the possible means
> of generating transactions on this bus.
>
> +config ASPEED_P2A_CTRL
> + depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
> + tristate "Aspeed ast2400/2500 HOST P2A VGA MMIO to BMC bridge control"
> + help
> + Control Aspeed ast2400/2500 HOST P2A VGA MMIO to BMC mappings through
> + ioctl()s, the driver also provides an interface for userspace mappings to
> + a pre-defined region.
> +
> config ASPEED_LPC_CTRL
> depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
> tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control"
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index e39ccbbc1b3a..57577aee354f 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -55,6 +55,7 @@ obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
> obj-$(CONFIG_CXL_BASE) += cxl/
> obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
> obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
> +obj-$(CONFIG_ASPEED_P2A_CTRL) += aspeed-p2a-ctrl.o
> obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
> obj-$(CONFIG_OCXL) += ocxl/
> obj-y += cardreader/
> diff --git a/drivers/misc/aspeed-p2a-ctrl.c b/drivers/misc/aspeed-p2a-ctrl.c
> new file mode 100644
> index 000000000000..bcf68f086e74
> --- /dev/null
> +++ b/drivers/misc/aspeed-p2a-ctrl.c
> @@ -0,0 +1,451 @@
> +/*
> + * Copyright 2019 Google Inc
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + *
> + * Provides a simple driver to control the ASPEED P2A interface which allows
> + * the host to read and write to various regions of the BMC's memory.
> + */
> +
> +#include <linux/fs.h>
> +#include <linux/io.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/miscdevice.h>
> +#include <linux/mm.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/uaccess.h>
> +
> +#include <linux/aspeed-p2a-ctrl.h>
> +
> +#define DEVICE_NAME "aspeed-p2a-ctrl"
> +
> +/* SCU2C is a Misc. Control Register. */
> +#define SCU2C 0x2c
> +/* SCU180 is the PCIe Configuration Setting Control Register. */
> +#define SCU180 0x180
> +/* Bit 1 controls the P2A bridge, while bit 0 controls the entire VGA device
> + * on the PCI bus. */
> +#define SCU180_ENP2A BIT(1)
> +
> +/* The ast2400/2500 both have six ranges. */
> +#define P2A_REGION_COUNT 6
> +
> +struct region {
> + u32 min;
> + u32 max;
> + u32 bit;
> +};
> +
> +struct aspeed_p2a_model_data {
> + /* min, max, bit */
> + struct region regions[P2A_REGION_COUNT];
> +};
> +
> +struct aspeed_p2a_ctrl {
> + struct miscdevice miscdev;
> + struct regmap *regmap;
> +
> + const struct aspeed_p2a_model_data *config;
> +
> + /* Access to these needs to be locked, held via probe, mapping ioctl,
> + * and release, remove.
> + */
> + struct mutex tracking;
> + u32 readers;
> + u32 readerwriters[P2A_REGION_COUNT];
> +
> + phys_addr_t mem_base;
> + resource_size_t mem_size;
> +};
> +
> +struct aspeed_p2a_user {
> + struct file *file;
> + struct aspeed_p2a_ctrl *parent;
> +
> + /** The entire memory space is opened for reading once the bridge is
> + * enabled, therefore this needs only to be tracked once per user.
> + * If any user has it open for read, the bridge must stay enabled.
> + */
> + u32 read;
> +
> + /** Each entry of the array corresponds to a P2A Region. If the user
> + * opens for read or readwrite, the reference goes up here. On release,
> + * this array is walked and references adjusted accordingly.
> + */
> + u32 readwrite[P2A_REGION_COUNT];
> +};
> +
> +static void aspeed_p2a_enable_bridge(struct aspeed_p2a_ctrl *p2a_ctrl)
> +{
> + regmap_update_bits(p2a_ctrl->regmap, SCU180, SCU180_ENP2A, SCU180_ENP2A);
> +}
> +
> +static void aspeed_p2a_disable_bridge(struct aspeed_p2a_ctrl *p2a_ctrl)
> +{
> + regmap_update_bits(p2a_ctrl->regmap, SCU180, SCU180_ENP2A, 0);
> +}
> +
> +static int aspeed_p2a_mmap(struct file *file, struct vm_area_struct *vma)
> +{
> + struct aspeed_p2a_user *priv = file->private_data;
> + struct aspeed_p2a_ctrl *ctrl = priv->parent;
> +
> + if (ctrl->mem_base == 0 && ctrl->mem_size == 0)
> + return -EINVAL;
> +
> + unsigned long vsize = vma->vm_end - vma->vm_start;
> + pgprot_t prot = vma->vm_page_prot;
> +
> + if (vma->vm_pgoff + vsize > ctrl->mem_base + ctrl->mem_size)
> + return -EINVAL;
> +
> + /* ast2400/2500 AHB accesses are not cache coherent */
> + prot = pgprot_noncached(prot);
> +
> + if (remap_pfn_range(vma, vma->vm_start,
> + (ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff,
> + vsize, prot))
> + return -EAGAIN;
> +
> + return 0;
> +}
> +
> +static void aspeed_p2a_region_acquire(struct aspeed_p2a_user *priv,
> + struct aspeed_p2a_ctrl *ctrl,
> + struct aspeed_p2a_ctrl_mapping *map)
> +{
> + int i;
> + u32 base, end;
> +
> + base = map->addr;
> + end = map->addr + (map->length - 1);
> +
> + /* If the value is a legal u32, it will find a match. */
> + for (i = 0; i < P2A_REGION_COUNT; i++) {
> + const struct region *curr = &ctrl->config->regions[i];
> +
> + /* If the top of this region is lower than your base, skip it.
> + */
> + if (curr->max < base)
> + continue;
> +
> + /* If the bottom of this region is higher than your end, bail.
> + */
> + if (curr->min > end)
> + break;
> + /* Lock this and update it, therefore it someone else is
> + * closing their file out, this'll preserve the increment.
> + */
> + mutex_lock(&ctrl->tracking);
> + ctrl->readerwriters[i] += 1;
> + mutex_unlock(&ctrl->tracking);
> +
> + /* Track with the user, so when they close their file, we can
> + * decrement properly.
> + */
> + priv->readwrite[i] += 1;
> +
> + /* Enable the region as read-write. */
> + regmap_update_bits(ctrl->regmap, SCU2C, curr->bit, 0);
> + }
> +}
> +
> +static long aspeed_p2a_ioctl(struct file *file, unsigned int cmd,
> + unsigned long data)
> +{
> + struct aspeed_p2a_user *priv = file->private_data;
> + struct aspeed_p2a_ctrl *ctrl = priv->parent;
> + void __user *arg = (void __user *)data;
> + struct aspeed_p2a_ctrl_mapping map;
> +
> + if (copy_from_user(&map, arg, sizeof(map)))
> + return -EFAULT;
> +
> + switch (cmd) {
> + case ASPEED_P2A_CTRL_IOCTL_SET_WINDOW:
> + /* If they want a region to be read-only, since the entire
> + * region is read-only once enabled, we just need to track this
> + * user wants to read from the bridge, and if it's not enabled.
> + * Enable it.
> + */
> + if (map.flags == ASPEED_P2A_CTRL_READ_ONLY) {
> + mutex_lock(&ctrl->tracking);
> + ctrl->readers += 1;
> + mutex_unlock(&ctrl->tracking);
> +
> + /* Track with the user, so when they close their file,
> + * we can decrement properly.
> + */
> + priv->read += 1;
> + } else if (map.flags == ASPEED_P2A_CTRL_READWRITE) {
> + aspeed_p2a_region_acquire(priv, ctrl, &map);
> + } else {
> + /* Invalid map flags. */
> + return -EINVAL;
> + }
> +
> + aspeed_p2a_enable_bridge(ctrl);
> + return 0;
> + case ASPEED_P2A_CTRL_IOCTL_GET_MEMORY_CONFIG:
> + /* This is a request for the memory-region and corresponding
> + * length that is used by the driver for mmap. */
> +
> + map.flags = 0;
> + map.addr = ctrl->mem_base;
> + map.length = ctrl->mem_size;
> +
> + return copy_to_user(arg, &map, sizeof(map)) ? -EFAULT : 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> +
> +/**
> + * When a user opens this file, we create a structure to track their mappings.
> + *
> + * A user can map a region as read-only (bridge enabled), or read-write (bit
> + * flipped, and bridge enabled). Either way, this tracking is used, s.t. when
> + * they release the device references are handled.
> + *
> + * The bridge is not enabled until a user calls an ioctl to map a region,
> + * simply opening the device does not enable it.
> + */
> +static int aspeed_p2a_open(struct inode *inode, struct file *file)
> +{
> + struct aspeed_p2a_user *priv;
> +
> + priv = kmalloc(sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->file = file;
> + priv->read = 0;
> + memset(priv->readwrite, 0, sizeof(priv->readwrite));
> +
> + /* The file's private_data is initialized to the p2a_ctrl. */
> + priv->parent = file->private_data;
> +
> + /* Set the file's private_data to the user's data. */
> + file->private_data = priv;
> +
> + return 0;
> +}
> +
> +/**
> + * This will close the users mappings. It will go through what they had opened
> + * for readwrite, and decrement those counts. If at the end, this is the last
> + * user, it'll close the bridge.
> + */
> +static int aspeed_p2a_release(struct inode *inode, struct file *file)
> +{
> + int i;
> + u32 value;
> + u32 bits = 0;
> + bool open_regions = false;
> + struct aspeed_p2a_user *priv = file->private_data;
> +
> + /* Lock others from changing these values until everything is updated
> + * in one pass */
> + mutex_lock(&priv->parent->tracking);
> +
> + priv->parent->readers -= priv->read;;
> +
> + for (i = 0; i < P2A_REGION_COUNT; i++) {
> + priv->parent->readerwriters[i] -= priv->readwrite[i];
> +
> + if (priv->parent->readerwriters[i] > 0)
> + open_regions = true;
> + else
> + bits |= priv->parent->config->regions[i].bit;
> + }
> +
> + /* Setting a bit to 1 disables the region, so let's just OR with the
> + * above to disable any.
> + */
> +
> + /* Note, if another user is trying to ioctl, they can't grab tracking,
> + * and therefore can't grab either register mutex.
> + * If another user is trying to close, they can't grab tracking either.
> + */
> + regmap_update_bits(priv->parent->regmap, SCU2C, bits, bits);
> +
> + /* If parent->readers is zero and open windows is 0, disable the
> + * bridge.
> + */
> + if (!open_regions && priv->parent->readers == 0)
> + aspeed_p2a_disable_bridge(priv->parent);
> +
> + mutex_unlock(&priv->parent->tracking);
> +
> + kfree(priv);
> +
> + return 0;
> +}
> +
> +static const struct file_operations aspeed_p2a_ctrl_fops = {
> + .owner = THIS_MODULE,
> + .mmap = aspeed_p2a_mmap,
> + .unlocked_ioctl = aspeed_p2a_ioctl,
> + .open = aspeed_p2a_open,
> + .release = aspeed_p2a_release,
> +};
> +
> +/** The regions are controlled by SCU2C */
> +static void aspeed_p2a_disable_all(struct aspeed_p2a_ctrl *p2a_ctrl)
> +{
> + int i;
> + u32 value = 0;
> +
> + for (i = 0; i < P2A_REGION_COUNT; i++)
> + value |= p2a_ctrl->config->regions[i].bit;
> +
> + regmap_update_bits(p2a_ctrl->regmap, SCU2C, value, value);
> +
> + /* Disable the bridge. */
> + aspeed_p2a_disable_bridge(p2a_ctrl);
> +}
> +
> +static int aspeed_p2a_ctrl_probe(struct platform_device *pdev)
> +{
> + struct aspeed_p2a_ctrl *misc_ctrl;
> + struct device *dev;
> + struct resource *res, resm;
> + struct device_node *node;
> + int rc = 0;
> +
> + dev = &pdev->dev;
> +
> + misc_ctrl = devm_kzalloc(dev, sizeof(*misc_ctrl), GFP_KERNEL);
> + if (!misc_ctrl)
> + return -ENOMEM;
> +
> + mutex_init(&misc_ctrl->tracking);
> + misc_ctrl->readers = 0;
> + memset(misc_ctrl->readerwriters, 0, sizeof(misc_ctrl->readerwriters));
> +
> + misc_ctrl->mem_size = 0;
> + misc_ctrl->mem_base = 0;
> +
> + /* optional. */
> + node = of_parse_phandle(dev->of_node, "memory-region", 0);
> + if (node) {
> + rc = of_address_to_resource(node, 0, &resm);
> + of_node_put(node);
> + if (rc) {
> + dev_err(dev, "Couldn't address to resource for reserved memory\n");
> + return -ENOMEM;
> + }
> +
> + misc_ctrl->mem_size = resource_size(&resm);
> + misc_ctrl->mem_base = resm.start;
> + }
> + node = of_parse_phandle(dev->of_node, "syscon", 0);
> + if (!node)
> + dev_err(dev, "Couldn't find syscon property\n");
Need to exit on this point.
> +
> + misc_ctrl->regmap = syscon_node_to_regmap(node);
> + of_node_put(node);
> +
> + misc_ctrl->config = of_device_get_match_data(dev);
> +
> + dev_set_drvdata(&pdev->dev, misc_ctrl);
> +
> + aspeed_p2a_disable_all(misc_ctrl);
> +
> + misc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
> + misc_ctrl->miscdev.name = DEVICE_NAME;
> + misc_ctrl->miscdev.fops = &aspeed_p2a_ctrl_fops;
> + misc_ctrl->miscdev.parent = dev;
> + rc = misc_register(&misc_ctrl->miscdev);
> + if (rc) {
> + dev_err(dev, "Unable to register device\n");
> + goto err;
No need to jump anymore since there's nothing to skip.
> + }
> +
> +err:
> + return rc;
> +}
> +
> +static int aspeed_p2a_ctrl_remove(struct platform_device *pdev)
> +{
> + struct aspeed_p2a_ctrl *p2a_ctrl = dev_get_drvdata(&pdev->dev);
> +
> + misc_deregister(&p2a_ctrl->miscdev);
> +
> + return 0;
> +}
> +
> +/*
> + * bit | SCU2C | ast2400
> + * 25 | DRAM | 0x40000000 - 0x5FFFFFFF
> + * 24 | SPI | 0x30000000 - 0x3FFFFFFF
> + * 23 | SOC | 0x18000000 - 0x1FFFFFFF, 0x60000000 - 0xFFFFFFFF
> + * 22 | FLASH | 0x00000000 - 0x17FFFFFF, 0x20000000 - 0x2FFFFFFF
> + *
> + * bit | SCU2C | ast2500
> + * 25 | DRAM | 0x80000000 - 0xFFFFFFFF
> + * 24 | SPI | 0x60000000 - 0x7FFFFFFF
> + * 23 | SOC | 0x10000000 - 0x1FFFFFFF, 0x40000000 - 0x5FFFFFFF
> + * 22 | FLASH | 0x00000000 - 0x0FFFFFFF, 0x20000000 - 0x3FFFFFFF
> + */
> +
> +#define SCU2C_DRAM BIT(25)
> +#define SCU2C_SPI BIT(24)
> +#define SCU2C_SOC BIT(23)
> +#define SCU2C_FLASH BIT(22)
> +
> +static const struct aspeed_p2a_model_data ast2400_model_data = {
> + .regions = {
> + {0x00000000, 0x17FFFFFF, SCU2C_FLASH},
> + {0x18000000, 0x1FFFFFFF, SCU2C_SOC},
> + {0x20000000, 0x2FFFFFFF, SCU2C_FLASH},
> + {0x30000000, 0x3FFFFFFF, SCU2C_SPI},
> + {0x40000000, 0x5FFFFFFF, SCU2C_DRAM},
> + {0x60000000, 0xFFFFFFFF, SCU2C_SOC},
> + }
> +};
> +
> +static const struct aspeed_p2a_model_data ast2500_model_data = {
> + .regions = {
> + {0x00000000, 0x0FFFFFFF, SCU2C_FLASH},
> + {0x10000000, 0x1FFFFFFF, SCU2C_SOC},
> + {0x20000000, 0x3FFFFFFF, SCU2C_FLASH},
> + {0x40000000, 0x5FFFFFFF, SCU2C_SOC},
> + {0x60000000, 0x7FFFFFFF, SCU2C_SPI},
> + {0x80000000, 0xFFFFFFFF, SCU2C_DRAM},
> + }
> +};
> +
> +static const struct of_device_id aspeed_p2a_ctrl_match[] = {
> + { .compatible = "aspeed,ast2400-p2a-ctrl",
> + .data = &ast2400_model_data },
> + { .compatible = "aspeed,ast2500-p2a-ctrl",
> + .data = &ast2500_model_data },
> + { },
> +};
> +
> +static struct platform_driver aspeed_p2a_ctrl_driver = {
> + .driver = {
> + .name = DEVICE_NAME,
> + .of_match_table = aspeed_p2a_ctrl_match,
> + },
> + .probe = aspeed_p2a_ctrl_probe,
> + .remove = aspeed_p2a_ctrl_remove,
> +};
> +
> +module_platform_driver(aspeed_p2a_ctrl_driver);
> +
> +MODULE_DEVICE_TABLE(of, aspeed_p2a_ctrl_match);
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Patrick Venture <venture at google.com>");
> +MODULE_DESCRIPTION("Control for aspeed 2400/2500 P2A VGA HOST to BMC mappings");
> diff --git a/include/uapi/linux/aspeed-p2a-ctrl.h b/include/uapi/linux/aspeed-p2a-ctrl.h
> new file mode 100644
> index 000000000000..e839cdc31db9
> --- /dev/null
> +++ b/include/uapi/linux/aspeed-p2a-ctrl.h
> @@ -0,0 +1,59 @@
> +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
> +/*
> + * Copyright 2019 Google Inc
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + *
> + * Provides a simple driver to control the ASPEED P2A interface which allows
> + * the host to read and write to various regions of the BMC's memory.
> + */
> +
> +#ifndef _UAPI_LINUX_ASPEED_P2A_CTRL_H
> +#define _UAPI_LINUX_ASPEED_P2A_CTRL_H
> +
> +#include <linux/ioctl.h>
> +#include <linux/types.h>
> +
> +#define ASPEED_P2A_CTRL_READ_ONLY 0
> +#define ASPEED_P2A_CTRL_READWRITE 1
> +
> +/*
> + * This driver provides a mechanism for enabling or disabling the read-write
> + * property of specific windows into the ASPEED BMC's memory.
> + *
> + * A user can map a region of the BMC's memory as read-only or read-write, with
> + * the caveat that once any region is mapped, all regions are unlocked for
> + * reading.
> + */
> +
> +/**
> + * Unlock a region of BMC physical memory for access from the host.
> + *
> + * Also used to read back the optional memory-region configuration for the
> + * driver.
> + */
> +struct aspeed_p2a_ctrl_mapping {
> + __u32 addr;
> + __u32 length;
> + __u32 flags;
> +};
> +
> +#define __ASPEED_P2A_CTRL_IOCTL_MAGIC 0xb3
> +
> +/**
> + * This IOCTL is meant to configure a region or regions of memory given a
> + * starting address and length to be readable by the host, or
> + * readable-writeable. */
> +#define ASPEED_P2A_CTRL_IOCTL_SET_WINDOW _IOW(__ASPEED_P2A_CTRL_IOCTL_MAGIC, \
> + 0x00, struct aspeed_p2a_ctrl_mapping)
> +
> +/**
> + * This IOCTL is meant to read back to the user the base address and length of
> + * the memory-region specified to the driver for use with mmap. */
> +#define ASPEED_P2A_CTRL_IOCTL_GET_MEMORY_CONFIG _IOWR(__ASPEED_P2A_CTRL_IOCTL_MAGIC, \
> + 0x01, struct aspeed_p2a_ctrl_mapping)
> +
> +#endif /* _UAPI_LINUX_ASPEED_P2A_CTRL_H */
> --
> 2.21.0.rc2.261.ga7da99ff1b-goog
>
More information about the Linux-aspeed
mailing list