[PATCH v3 07/12] soc: aspeed: xdma: Add user interface

Andrew Jeffery andrew at aj.id.au
Thu Dec 19 12:19:27 AEDT 2019



On Thu, 19 Dec 2019, at 01:39, Eddie James wrote:
> This commits adds a miscdevice to provide a user interface to the XDMA
> engine. The interface provides the write operation to start DMA
> operations. The DMA parameters are passed as the data to the write call.
> The actual data to transfer is NOT passed through write. Note that both
> directions of DMA operation are accomplished through the write command;
> BMC to host and host to BMC.
> 
> The XDMA driver reserves an area of physical memory for DMA operations,
> as the XDMA engine is restricted to accessing certain physical memory
> areas on some platforms. This memory forms a pool from which users can
> allocate pages for their usage with calls to mmap. The space allocated
> by a client will be the space used in the DMA operation. For an
> "upstream" (BMC to host) operation, the data in the client's area will
> be transferred to the host. For a "downstream" (host to BMC) operation,
> the host data will be placed in the client's memory area.
> 
> Poll is also provided in order to determine when the DMA operation is
> complete for non-blocking IO.
> 
> Signed-off-by: Eddie James <eajames at linux.ibm.com>
> ---
> Changes since v2:
>  - Rework commit message to talk about VGA memory less
>  - Remove user reset functionality
>  - Clean up sanity checks in aspeed_xdma_write()
>  - Wait for transfer complete in the vm area close function
> 
>  drivers/soc/aspeed/aspeed-xdma.c | 205 ++++++++++++++++++++++++++++++-
>  1 file changed, 203 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/soc/aspeed/aspeed-xdma.c b/drivers/soc/aspeed/aspeed-xdma.c
> index cb94adf798b1..e844937dc925 100644
> --- a/drivers/soc/aspeed/aspeed-xdma.c
> +++ b/drivers/soc/aspeed/aspeed-xdma.c
> @@ -13,6 +13,7 @@
>  #include <linux/io.h>
>  #include <linux/jiffies.h>
>  #include <linux/mfd/syscon.h>
> +#include <linux/miscdevice.h>
>  #include <linux/module.h>
>  #include <linux/mutex.h>
>  #include <linux/of_device.h>
> @@ -201,6 +202,8 @@ struct aspeed_xdma {
>  	struct clk *clock;
>  	struct reset_control *reset;
>  
> +	/* file_lock serializes reads of current_client */
> +	struct mutex file_lock;

I wonder whether start_lock can serve this purpose.

>  	/* client_lock protects error and in_progress of the client */
>  	spinlock_t client_lock;
>  	struct aspeed_xdma_client *current_client;
> @@ -223,6 +226,8 @@ struct aspeed_xdma {
>  	void __iomem *mem_virt;
>  	dma_addr_t cmdq_phys;
>  	struct gen_pool *pool;
> +
> +	struct miscdevice misc;
>  };
>  
>  struct aspeed_xdma_client {
> @@ -522,6 +527,185 @@ static irqreturn_t aspeed_xdma_pcie_irq(int irq, 
> void *arg)
>  	return IRQ_HANDLED;
>  }
>  
> +static ssize_t aspeed_xdma_write(struct file *file, const char __user *buf,
> +				 size_t len, loff_t *offset)
> +{
> +	int rc;
> +	struct aspeed_xdma_op op;
> +	struct aspeed_xdma_client *client = file->private_data;
> +	struct aspeed_xdma *ctx = client->ctx;
> +
> +	if (len != sizeof(op))
> +		return -EINVAL;
> +
> +	rc = copy_from_user(&op, buf, len);
> +	if (rc)
> +		return rc;
> +
> +	if (!op.len || op.len > client->size ||
> +	    op.direction > ASPEED_XDMA_DIRECTION_UPSTREAM)
> +		return -EINVAL;
> +
> +	if (file->f_flags & O_NONBLOCK) {
> +		if (!mutex_trylock(&ctx->file_lock))
> +			return -EAGAIN;
> +
> +		if (ctx->current_client) {

Should be tested under client_lock for consistency with the previous patch,
though perhaps you could use READ_ONCE()?

> +			mutex_unlock(&ctx->file_lock);
> +			return -EBUSY;
> +		}
> +	} else {
> +		mutex_lock(&ctx->file_lock);
> +
> +		rc = wait_event_interruptible(ctx->wait, !ctx->current_client);
> +		if (rc) {
> +			mutex_unlock(&ctx->file_lock);
> +			return -EINTR;
> +		}
> +	}
> +
> +	aspeed_xdma_start(ctx, &op, client->phys, client);
> +
> +	mutex_unlock(&ctx->file_lock);

Shouldn't we lift start_lock out of aspeed_xdma_start() use that here
instead of file_lock? I think that would mean that we could remove
file_lock.

> +
> +	if (!(file->f_flags & O_NONBLOCK)) {
> +		rc = wait_event_interruptible(ctx->wait, !client->in_progress);
> +		if (rc)
> +			return -EINTR;
> +
> +		if (client->error)
> +			return -EIO;
> +	}
> +
> +	return len;
> +}
> +
> +static __poll_t aspeed_xdma_poll(struct file *file,
> +				 struct poll_table_struct *wait)
> +{
> +	__poll_t mask = 0;
> +	__poll_t req = poll_requested_events(wait);
> +	struct aspeed_xdma_client *client = file->private_data;
> +	struct aspeed_xdma *ctx = client->ctx;
> +
> +	if (req & (EPOLLIN | EPOLLRDNORM)) {
> +		if (client->in_progress)
> +			poll_wait(file, &ctx->wait, wait);
> +
> +		if (!client->in_progress) {
> +			if (client->error)
> +				mask |= EPOLLERR;
> +			else
> +				mask |= EPOLLIN | EPOLLRDNORM;
> +		}
> +	}
> +
> +	if (req & (EPOLLOUT | EPOLLWRNORM)) {
> +		if (ctx->current_client)
> +			poll_wait(file, &ctx->wait, wait);
> +
> +		if (!ctx->current_client)
> +			mask |= EPOLLOUT | EPOLLWRNORM;
> +	}
> +
> +	return mask;
> +}
> +
> +static void aspeed_xdma_vma_close(struct vm_area_struct *vma)
> +{
> +	int rc;
> +	struct aspeed_xdma_client *client = vma->vm_private_data;
> +
> +	rc = wait_event_interruptible(client->ctx->wait, !client->in_progress);
> +	if (rc)
> +		return;
> +
> +	gen_pool_free(client->ctx->pool, (unsigned long)client->virt,
> +		      client->size);
> +
> +	client->virt = NULL;
> +	client->phys = 0;
> +	client->size = 0;
> +}
> +
> +static const struct vm_operations_struct aspeed_xdma_vm_ops = {
> +	.close =	aspeed_xdma_vma_close,
> +};
> +
> +static int aspeed_xdma_mmap(struct file *file, struct vm_area_struct *vma)
> +{
> +	int rc;
> +	struct aspeed_xdma_client *client = file->private_data;
> +	struct aspeed_xdma *ctx = client->ctx;
> +
> +	/* restrict file to one mapping */
> +	if (client->size)
> +		return -EBUSY;
> +
> +	client->size = vma->vm_end - vma->vm_start;
> +	client->virt = gen_pool_dma_alloc(ctx->pool, client->size,
> +					  &client->phys);
> +	if (!client->virt) {
> +		client->phys = 0;
> +		client->size = 0;
> +		return -ENOMEM;
> +	}
> +
> +	vma->vm_pgoff = (client->phys - ctx->mem_phys) >> PAGE_SHIFT;
> +	vma->vm_ops = &aspeed_xdma_vm_ops;
> +	vma->vm_private_data = client;
> +	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
> +
> +	rc = io_remap_pfn_range(vma, vma->vm_start, client->phys >> PAGE_SHIFT,
> +				client->size, vma->vm_page_prot);
> +	if (rc) {

Probably worth a dev_warn() here so we know what happened?

> +		gen_pool_free(ctx->pool, (unsigned long)client->virt,
> +			      client->size);
> +
> +		client->virt = NULL;
> +		client->phys = 0;
> +		client->size = 0;
> +		return rc;
> +	}
> +
> +	dev_dbg(ctx->dev, "mmap: v[%08lx] to p[%08x], s[%08x]\n",
> +		vma->vm_start, (u32)client->phys, client->size);
> +
> +	return 0;
> +}
> +
> +static int aspeed_xdma_open(struct inode *inode, struct file *file)
> +{
> +	struct miscdevice *misc = file->private_data;
> +	struct aspeed_xdma *ctx = container_of(misc, struct aspeed_xdma, misc);
> +	struct aspeed_xdma_client *client = kzalloc(sizeof(*client),
> +						    GFP_KERNEL);
> +
> +	if (!client)
> +		return -ENOMEM;
> +
> +	client->ctx = ctx;
> +	file->private_data = client;
> +	return 0;
> +}
> +
> +static int aspeed_xdma_release(struct inode *inode, struct file *file)
> +{
> +	struct aspeed_xdma_client *client = file->private_data;
> +
> +	kfree(client);

I assume the vma gets torn down before release() gets invoked? I haven't
looked closely.

Andrew


More information about the Linux-aspeed mailing list