[PATCH 2/3] ipmi: kcs: Finish configuring ASPEED KCS device before enable

[Corey Minyard]

On Tue, Dec 03, 2019 at 11:08:24PM +1030, Andrew Jeffery wrote:
> The currently interrupts are configured after the channel was enabled.

How about:

The interrupts were configured after the channel was enabled, configure
them before so they will work.

-corey

> 
> Signed-off-by: Andrew Jeffery <andrew at aj.id.au>
> Reviewed-by: Joel Stanley <joel at jms.id.au>
> Reviewed-by: Haiyue Wang <haiyue.wang at linux.intel.com>
> ---
>  drivers/char/ipmi/kcs_bmc_aspeed.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/char/ipmi/kcs_bmc_aspeed.c b/drivers/char/ipmi/kcs_bmc_aspeed.c
> index 3c955946e647..e3dd09022589 100644
> --- a/drivers/char/ipmi/kcs_bmc_aspeed.c
> +++ b/drivers/char/ipmi/kcs_bmc_aspeed.c
> @@ -268,13 +268,14 @@ static int aspeed_kcs_probe(struct platform_device *pdev)
>  	kcs_bmc->io_inputb = aspeed_kcs_inb;
>  	kcs_bmc->io_outputb = aspeed_kcs_outb;
>  
> +	rc = aspeed_kcs_config_irq(kcs_bmc, pdev);
> +	if (rc)
> +		return rc;
> +
>  	dev_set_drvdata(dev, kcs_bmc);
>  
>  	aspeed_kcs_set_address(kcs_bmc, addr);
>  	aspeed_kcs_enable_channel(kcs_bmc, true);
> -	rc = aspeed_kcs_config_irq(kcs_bmc, pdev);
> -	if (rc)
> -		return rc;
>  
>  	rc = misc_register(&kcs_bmc->miscdev);
>  	if (rc) {
> -- 
> git-series 0.9.1