[PATCH 7/7] ARM: configs: aspeed_g5: Enable AST2600

[Andrew Jeffery]

On Wed, 21 Aug 2019, at 15:26, Joel Stanley wrote:
> CONFIG_STRICT_KERNEL_RWX is enabled by default with ARMv7.
> 
> Turn on HIGHMEM as the EVB has 2GB of RAM, and not all is usable without
> hihgmem.
> 
> The SoC contains Cortex A7 supporting VFP and has two CPUs.
> 
> Signed-off-by: Joel Stanley <joel at jms.id.au>
> ---
>  arch/arm/configs/aspeed_g5_defconfig | 17 ++++++++++++++---
>  1 file changed, 14 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/configs/aspeed_g5_defconfig 
> b/arch/arm/configs/aspeed_g5_defconfig
> index 426d8e0c9890..597536cc9573 100644
> --- a/arch/arm/configs/aspeed_g5_defconfig
> +++ b/arch/arm/configs/aspeed_g5_defconfig
> @@ -21,21 +21,26 @@ CONFIG_PERF_EVENTS=y
>  CONFIG_SLAB=y
>  CONFIG_SLAB_FREELIST_RANDOM=y
>  CONFIG_ARCH_MULTI_V6=y
> -# CONFIG_ARCH_MULTI_V7 is not set
>  CONFIG_ARCH_ASPEED=y
>  CONFIG_MACH_ASPEED_G5=y
> +CONFIG_MACH_ASPEED_G6=y
>  # CONFIG_CACHE_L2X0 is not set
> +CONFIG_SMP=y
> +# CONFIG_ARM_CPU_TOPOLOGY is not set
>  CONFIG_VMSPLIT_2G=y
> +CONFIG_NR_CPUS=2
> +CONFIG_HIGHMEM=y
>  CONFIG_UACCESS_WITH_MEMCPY=y
>  CONFIG_SECCOMP=y
>  # CONFIG_ATAGS is not set
>  CONFIG_ZBOOT_ROM_TEXT=0x0
>  CONFIG_ZBOOT_ROM_BSS=0x0
>  CONFIG_KEXEC=y
> -# CONFIG_SUSPEND is not set
> +CONFIG_VFP=y
> +CONFIG_NEON=y
> +CONFIG_KERNEL_MODE_NEON=y
>  CONFIG_FIRMWARE_MEMMAP=y
>  CONFIG_JUMP_LABEL=y
> -CONFIG_STRICT_KERNEL_RWX=y
>  # CONFIG_BLK_DEV_BSG is not set
>  # CONFIG_BLK_DEBUG_FS is not set
>  # CONFIG_MQ_IOSCHED_DEADLINE is not set
> @@ -140,10 +145,12 @@ CONFIG_ASPEED_BT_IPMI_BMC=y
>  CONFIG_HW_RANDOM_TIMERIOMEM=y
>  # CONFIG_I2C_COMPAT is not set
>  CONFIG_I2C_CHARDEV=y
> +CONFIG_I2C_MUX=y
>  CONFIG_I2C_MUX_PCA9541=y
>  CONFIG_I2C_MUX_PCA954x=y
>  CONFIG_I2C_ASPEED=y
>  CONFIG_I2C_FSI=y
> +CONFIG_SPI=y
>  CONFIG_GPIOLIB=y
>  CONFIG_GPIO_SYSFS=y
>  CONFIG_GPIO_ASPEED=y
> @@ -194,6 +201,10 @@ CONFIG_USB_CONFIGFS_F_LB_SS=y
>  CONFIG_USB_CONFIGFS_F_FS=y
>  CONFIG_USB_CONFIGFS_F_HID=y
>  CONFIG_USB_CONFIGFS_F_PRINTER=y
> +CONFIG_MMC=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_PLTFM=y
> +CONFIG_MMC_SDHCI_OF_ASPEED=y

The patches haven't yet been applied to the MMC tree, maybe we should
add this later?

Anyway,

Acked-by: Andrew Jeffery <andrew at aj.id.au>