[PATCH 0/5] Aspeed: Enable video engine

[Hans Verkuil]

Hi Eddie,

On 4/2/19 8:24 PM, Eddie James wrote:
> This series enables the video engine on Aspeed BMC platforms. The video engine
> clocking is added to the Aspeed clock driver. The use of the video engine reset
> line, originally planned to be made externally available in the clock driver,
> is removed from the video engine driver. Finally a node for the video engine is
> added to the AST2500 devicetree.
> The series also includes a missing property for reserved memory in the
> devicetree documentation, and a small change to make the video engine driver
> start without reserved memory.

I assume you'll post a v3 since there were some comments?

If you want to get it in for 5.2, then be aware that you should post it tomorrow
at the latest.

Regards,

	Hans

> 
> Eddie James (5):
>   media: platform: Aspeed: Remove use of reset line
>   media: platform: Aspeed: Make reserved memory optional
>   media: dt-bindings: aspeed-video: Add missing memory-region property
>   clk: Aspeed: Setup video engine clocking
>   ARM: dts: aspeed-g5: Add video engine
> 
>  .../devicetree/bindings/media/aspeed-video.txt     |  6 ++++
>  arch/arm/boot/dts/aspeed-g5.dtsi                   | 10 ++++++
>  drivers/clk/clk-aspeed.c                           | 42 ++++++++++++++++++++--
>  drivers/media/platform/aspeed-video.c              | 33 ++++-------------
>  4 files changed, 61 insertions(+), 30 deletions(-)
>