[PATCH v2] soc: add aspeed folder and misc drivers
Patrick Venture
venture at google.com
Tue Apr 23 05:24:28 AEST 2019
On Mon, Apr 22, 2019 at 10:54 AM Patrick Venture <venture at google.com> wrote:
>
> Create a SoC folder for the ASPEED parts and place the misc drivers
> currently present into this folder. These drivers are not generic part
> drivers, but rather only apply to the ASPEED SoCs.
>
> Signed-off-by: Patrick Venture <venture at google.com>
> ---
> v2:
> Added configuration option for ASPEED to soc/Makefile
> ---
> drivers/misc/Kconfig | 16 ----------------
> drivers/misc/Makefile | 2 --
> drivers/soc/Kconfig | 1 +
> drivers/soc/Makefile | 1 +
> drivers/soc/aspeed/Kconfig | 19 +++++++++++++++++++
> drivers/soc/aspeed/Makefile | 2 ++
> .../{misc => soc/aspeed}/aspeed-lpc-ctrl.c | 0
> .../{misc => soc/aspeed}/aspeed-lpc-snoop.c | 0
> 8 files changed, 23 insertions(+), 18 deletions(-)
> create mode 100644 drivers/soc/aspeed/Kconfig
> create mode 100644 drivers/soc/aspeed/Makefile
> rename drivers/{misc => soc/aspeed}/aspeed-lpc-ctrl.c (100%)
> rename drivers/{misc => soc/aspeed}/aspeed-lpc-snoop.c (100%)
>
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 42ab8ec92a04..b80cb6af0cb4 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -496,22 +496,6 @@ config VEXPRESS_SYSCFG
> bus. System Configuration interface is one of the possible means
> of generating transactions on this bus.
>
> -config ASPEED_LPC_CTRL
> - depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
> - tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control"
> - ---help---
> - Control Aspeed ast2400/2500 HOST LPC to BMC mappings through
> - ioctl()s, the driver also provides a read/write interface to a BMC ram
> - region where the host LPC read/write region can be buffered.
> -
> -config ASPEED_LPC_SNOOP
> - tristate "Aspeed ast2500 HOST LPC snoop support"
> - depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
> - help
> - Provides a driver to control the LPC snoop interface which
> - allows the BMC to listen on and save the data written by
> - the host to an arbitrary LPC I/O port.
> -
> config PCI_ENDPOINT_TEST
> depends on PCI
> select CRC32
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index d5b7d3404dc7..b9affcdaa3d6 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -54,8 +54,6 @@ obj-$(CONFIG_GENWQE) += genwqe/
> obj-$(CONFIG_ECHO) += echo/
> obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
> obj-$(CONFIG_CXL_BASE) += cxl/
> -obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
> -obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
> obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
> obj-$(CONFIG_OCXL) += ocxl/
> obj-y += cardreader/
> diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
> index c07b4a85253f..b750a88547c7 100644
> --- a/drivers/soc/Kconfig
> +++ b/drivers/soc/Kconfig
> @@ -2,6 +2,7 @@ menu "SOC (System On Chip) specific Drivers"
>
> source "drivers/soc/actions/Kconfig"
> source "drivers/soc/amlogic/Kconfig"
> +source "drivers/soc/aspeed/Kconfig"
> source "drivers/soc/atmel/Kconfig"
> source "drivers/soc/bcm/Kconfig"
> source "drivers/soc/fsl/Kconfig"
> diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
> index 90b686e586c6..814128fe479f 100644
> --- a/drivers/soc/Makefile
> +++ b/drivers/soc/Makefile
> @@ -4,6 +4,7 @@
> #
>
> obj-$(CONFIG_ARCH_ACTIONS) += actions/
> +obj-$(CONFIG_ARCH_ASPEED) += aspeed/
> obj-$(CONFIG_ARCH_AT91) += atmel/
> obj-y += bcm/
> obj-$(CONFIG_ARCH_DOVE) += dove/
> diff --git a/drivers/soc/aspeed/Kconfig b/drivers/soc/aspeed/Kconfig
> new file mode 100644
> index 000000000000..457282cd1da5
> --- /dev/null
> +++ b/drivers/soc/aspeed/Kconfig
> @@ -0,0 +1,19 @@
> +menu "Aspeed SoC drivers"
> +
> +config ASPEED_LPC_CTRL
> + depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
> + tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control"
> + ---help---
> + Control Aspeed ast2400/2500 HOST LPC to BMC mappings through
> + ioctl()s, the driver also provides a read/write interface to a BMC ram
> + region where the host LPC read/write region can be buffered.
> +
> +config ASPEED_LPC_SNOOP
> + tristate "Aspeed ast2500 HOST LPC snoop support"
> + depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
> + help
> + Provides a driver to control the LPC snoop interface which
> + allows the BMC to listen on and save the data written by
> + the host to an arbitrary LPC I/O port.
> +
> +
> diff --git a/drivers/soc/aspeed/Makefile b/drivers/soc/aspeed/Makefile
> new file mode 100644
> index 000000000000..cfaa9adc67b5
> --- /dev/null
> +++ b/drivers/soc/aspeed/Makefile
> @@ -0,0 +1,2 @@
> +obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
> +obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
> diff --git a/drivers/misc/aspeed-lpc-ctrl.c b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
> similarity index 100%
> rename from drivers/misc/aspeed-lpc-ctrl.c
> rename to drivers/soc/aspeed/aspeed-lpc-ctrl.c
> diff --git a/drivers/misc/aspeed-lpc-snoop.c b/drivers/soc/aspeed/aspeed-lpc-snoop.c
> similarity index 100%
> rename from drivers/misc/aspeed-lpc-snoop.c
> rename to drivers/soc/aspeed/aspeed-lpc-snoop.c
> --
> 2.21.0.593.g511ec345e18-goog
>
Fixed CC on this reply (Gmail button didn't behave as expected) and
replied to the v2 patchset instead of accidentally the first.
Given this patchset, I have several patches that move the drivers into
the folder, and thought about writing it up as a series. I wanted to
see how this patchset would do before I staged the rest -- my question
is, should this patchset create the folder with the empty Kconfig and
Makefile, and then have follow-on patches that provide content to
split out the process into multiple logical steps?
More information about the Linux-aspeed
mailing list