[PATCH] net/ncsi: Add NCSI OEM command for FB Tiogapass
Samuel Mendoza-Jonas
sam at mendozajonas.com
Wed Sep 26 14:33:50 AEST 2018
On Tue, 2018-09-25 at 18:16 +0000, Vijay Khemka wrote:
> Hi Joel,
> Thanks, I am adding netdev mailing list here.
> Yes, this command is supported for all Mellanox card. It is as per Mellanox specification.
>
> Regards
> -Vijay
Hi Vijay,
Thanks for the patch; before I get too into a review though I'd like to
loop in Justin (cc'd) who I know is also working on an OEM command patch.
The changes here are very specific (eg. a command specific config option
"CONFIG_NCSI_OEM_CMD_GET_MAC"), which is ok on a small scale but if we
start to add an increasing amount of commands could get out of hand.
As I understand Justin's version adds a generic handler, using the NCSI
Netlink interface to pass OEM commands and responses to and from
userspace, which does the actual packet handling.
It would be good to compare these two approaches first before committing
to any one path
Justin - could you weigh in here and give a description of your intended
changes? Are you able to post your changes upstream so we can compare?
Regards,
Samuel
>
> On 9/24/18, 5:30 PM, "Joel Stanley" <joel at jms.id.au> wrote:
>
> Hi Vijay,
>
> On Tue, 25 Sep 2018 at 09:39, Vijay Khemka <vijaykhemka at fb.com> wrote:
> >
> > This patch adds OEM command to get mac address from NCSI device and and
> > configure the same to the network card.
> >
> > ncsi_cmd_arg - Modified this structure to include bigger payload data.
> > ncsi_cmd_handler_oem: This function handes oem command request
> > ncsi_rsp_handler_oem: This function handles response for OEM command.
> > get_mac_address_oem_mlx: This function will send OEM command to get
> > mac address for Mellanox card
> > set_mac_affinity_mlx: This will send OEM command to set Mac affinity
> > for Mellanox card
>
> Thanks for the patch. The code looks okay, but I wanted to get some
> input from our NCSI maintainer as to how OEM commands would be
> structured. Sam, can you please provide some review here?
>
> Is the command supported on all melanox cards, just some, or does
> TiogaPass have a special firmware that enables it?
>
> We should include the netdev mailing list in this discussion as the
> patch needs to be acceptable for upstream.
>
> Cheers,
>
> Joel
>
> >
> > Signed-off-by: Vijay Khemka <vijaykhemka at fb.com>
> > ---
> > net/ncsi/Kconfig | 3 ++
> > net/ncsi/internal.h | 11 +++++--
> > net/ncsi/ncsi-cmd.c | 24 +++++++++++++--
> > net/ncsi/ncsi-manage.c | 68 ++++++++++++++++++++++++++++++++++++++++++
> > net/ncsi/ncsi-pkt.h | 16 ++++++++++
> > net/ncsi/ncsi-rsp.c | 33 +++++++++++++++++++-
> > 6 files changed, 149 insertions(+), 6 deletions(-)
> >
> > diff --git a/net/ncsi/Kconfig b/net/ncsi/Kconfig
> > index 08a8a6031fd7..b8bf89fea7c8 100644
> > --- a/net/ncsi/Kconfig
> > +++ b/net/ncsi/Kconfig
> > @@ -10,3 +10,6 @@ config NET_NCSI
> > support. Enable this only if your system connects to a network
> > device via NCSI and the ethernet driver you're using supports
> > the protocol explicitly.
> > +config NCSI_OEM_CMD_GET_MAC
> > + bool "Get NCSI OEM MAC Address"
> > + depends on NET_NCSI
> > diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
> > index 8055e3965cef..da17958e6a4b 100644
> > --- a/net/ncsi/internal.h
> > +++ b/net/ncsi/internal.h
> > @@ -68,6 +68,10 @@ enum {
> > NCSI_MODE_MAX
> > };
> >
> > +#define NCSI_OEM_MFR_MLX_ID 0x8119
> > +#define NCSI_OEM_MLX_CMD_GET_MAC 0x1b00
> > +#define NCSI_OEM_MLX_CMD_SET_AFFINITY 0x010700
> > +
> > struct ncsi_channel_version {
> > u32 version; /* Supported BCD encoded NCSI version */
> > u32 alpha2; /* Supported BCD encoded NCSI version */
> > @@ -236,6 +240,7 @@ enum {
> > ncsi_dev_state_probe_dp,
> > ncsi_dev_state_config_sp = 0x0301,
> > ncsi_dev_state_config_cis,
> > + ncsi_dev_state_config_oem_gma,
> > ncsi_dev_state_config_clear_vids,
> > ncsi_dev_state_config_svf,
> > ncsi_dev_state_config_ev,
> > @@ -301,9 +306,9 @@ struct ncsi_cmd_arg {
> > unsigned short payload; /* Command packet payload length */
> > unsigned int req_flags; /* NCSI request properties */
> > union {
> > - unsigned char bytes[16]; /* Command packet specific data */
> > - unsigned short words[8];
> > - unsigned int dwords[4];
> > + unsigned char bytes[64]; /* Command packet specific data */
> > + unsigned short words[32];
> > + unsigned int dwords[16];
> > };
> > };
> >
> > diff --git a/net/ncsi/ncsi-cmd.c b/net/ncsi/ncsi-cmd.c
> > index 7567ca63aae2..3205e22c1734 100644
> > --- a/net/ncsi/ncsi-cmd.c
> > +++ b/net/ncsi/ncsi-cmd.c
> > @@ -211,6 +211,25 @@ static int ncsi_cmd_handler_snfc(struct sk_buff *skb,
> > return 0;
> > }
> >
> > +static int ncsi_cmd_handler_oem(struct sk_buff *skb,
> > + struct ncsi_cmd_arg *nca)
> > +{
> > + struct ncsi_cmd_oem_pkt *cmd;
> > + unsigned int len;
> > +
> > + len = sizeof(struct ncsi_cmd_pkt_hdr) + 4;
> > + if (nca->payload < 26)
> > + len += 26;
> > + else
> > + len += nca->payload;
> > +
> > + cmd = skb_put_zero(skb, len);
> > + memcpy(cmd->data, nca->bytes, nca->payload);
> > + ncsi_cmd_build_header(&cmd->cmd.common, nca);
> > +
> > + return 0;
> > +}
> > +
> > static struct ncsi_cmd_handler {
> > unsigned char type;
> > int payload;
> > @@ -244,7 +263,7 @@ static struct ncsi_cmd_handler {
> > { NCSI_PKT_CMD_GNS, 0, ncsi_cmd_handler_default },
> > { NCSI_PKT_CMD_GNPTS, 0, ncsi_cmd_handler_default },
> > { NCSI_PKT_CMD_GPS, 0, ncsi_cmd_handler_default },
> > - { NCSI_PKT_CMD_OEM, 0, NULL },
> > + { NCSI_PKT_CMD_OEM, -1, ncsi_cmd_handler_oem },
> > { NCSI_PKT_CMD_PLDM, 0, NULL },
> > { NCSI_PKT_CMD_GPUUID, 0, ncsi_cmd_handler_default }
> > };
> > @@ -317,7 +336,8 @@ int ncsi_xmit_cmd(struct ncsi_cmd_arg *nca)
> > }
> >
> > /* Get packet payload length and allocate the request */
> > - nca->payload = nch->payload;
> > + if (nch->payload >= 0)
> > + nca->payload = nch->payload;
> > nr = ncsi_alloc_command(nca);
> > if (!nr)
> > return -ENOMEM;
> > diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
> > index 091284760d21..3b2b86560cc8 100644
> > --- a/net/ncsi/ncsi-manage.c
> > +++ b/net/ncsi/ncsi-manage.c
> > @@ -635,6 +635,58 @@ static int set_one_vid(struct ncsi_dev_priv *ndp, struct ncsi_channel *nc,
> > return 0;
> > }
> >
> > +#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)
> > +/* NCSI Facebook OEM APIs */
> > +static void get_mac_address_oem_mlx(struct ncsi_dev_priv *ndp)
> > +{
> > + struct ncsi_cmd_arg nca;
> > + int ret = 0;
> > +
> > + memset(&nca, 0, sizeof(struct ncsi_cmd_arg));
> > + nca.ndp = ndp;
> > + nca.channel = ndp->active_channel->id;
> > + nca.package = ndp->active_package->id;
> > + nca.req_flags = NCSI_REQ_FLAG_EVENT_DRIVEN;
> > + nca.type = NCSI_PKT_CMD_OEM;
> > + nca.payload = 8;
> > +
> > + nca.dwords[0] = ntohl(NCSI_OEM_MFR_MLX_ID);
> > + nca.dwords[1] = ntohl(NCSI_OEM_MLX_CMD_GET_MAC);
> > +
> > + ret = ncsi_xmit_cmd(&nca);
> > + if (ret)
> > + netdev_err(ndp->ndev.dev,
> > + "NCSI: Failed to transmit cmd 0x%x during probe\n",
> > + nca.type);
> > +}
> > +
> > +static void set_mac_affinity_mlx(struct ncsi_dev_priv *ndp)
> > +{
> > + struct ncsi_cmd_arg nca;
> > + int ret = 0;
> > +
> > + memset(&nca, 0, sizeof(struct ncsi_cmd_arg));
> > + nca.ndp = ndp;
> > + nca.channel = ndp->active_channel->id;
> > + nca.package = ndp->active_package->id;
> > + nca.req_flags = NCSI_REQ_FLAG_EVENT_DRIVEN;
> > + nca.type = NCSI_PKT_CMD_OEM;
> > + nca.payload = 60;
> > +
> > + nca.dwords[0] = ntohl(NCSI_OEM_MFR_MLX_ID);
> > + nca.dwords[1] = ntohl(NCSI_OEM_MLX_CMD_SET_AFFINITY);
> > +
> > + memcpy(&(nca.bytes[8]), ndp->ndev.dev->dev_addr, ETH_ALEN);
> > + nca.bytes[14] = 0x09;
> > +
> > + ret = ncsi_xmit_cmd(&nca);
> > + if (ret)
> > + netdev_err(ndp->ndev.dev,
> > + "NCSI: Failed to transmit cmd 0x%x during probe\n",
> > + nca.type);
> > +}
> > +#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */
> > +
> > static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
> > {
> > struct ncsi_dev *nd = &ndp->ndev;
> > @@ -685,6 +737,22 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
> > goto error;
> > }
> >
> > +#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)
> > + /* Check Manufacture id if it is Mellanox then
> > + * get and set mac address. To Do: Add code for
> > + * other types of card if required
> > + */
> > + if (nc->version.mf_id == NCSI_OEM_MFR_MLX_ID)
> > + nd->state = ncsi_dev_state_config_oem_gma;
> > + else
> > + nd->state = ncsi_dev_state_config_clear_vids;
> > + break;
> > + case ncsi_dev_state_config_oem_gma:
> > + ndp->pending_req_num = 2;
> > + get_mac_address_oem_mlx(ndp);
> > + msleep(500);
> > + set_mac_affinity_mlx(ndp);
> > +#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */
> > nd->state = ncsi_dev_state_config_clear_vids;
> > break;
> > case ncsi_dev_state_config_clear_vids:
> > diff --git a/net/ncsi/ncsi-pkt.h b/net/ncsi/ncsi-pkt.h
> > index 91b4b66438df..0653a893eb12 100644
> > --- a/net/ncsi/ncsi-pkt.h
> > +++ b/net/ncsi/ncsi-pkt.h
> > @@ -151,6 +151,22 @@ struct ncsi_cmd_snfc_pkt {
> > unsigned char pad[22];
> > };
> >
> > +/* Oem Request Command */
> > +struct ncsi_cmd_oem_pkt {
> > + struct ncsi_cmd_pkt_hdr cmd; /* Command header */
> > + unsigned char data[64]; /* OEM Payload Data */
> > + __be32 checksum; /* Checksum */
> > +};
> > +
> > +/* Oem Response Packet */
> > +struct ncsi_rsp_oem_pkt {
> > + struct ncsi_rsp_pkt_hdr rsp; /* Command header */
> > + __be32 mfr_id; /* Manufacture ID */
> > + __be32 oem_cmd; /* oem command */
> > + unsigned char data[32]; /* Payload data */
> > + __be32 checksum; /* Checksum */
> > +};
> > +
> > /* Get Link Status */
> > struct ncsi_rsp_gls_pkt {
> > struct ncsi_rsp_pkt_hdr rsp; /* Response header */
> > diff --git a/net/ncsi/ncsi-rsp.c b/net/ncsi/ncsi-rsp.c
> > index 930c1d3796f0..3b94c96b9c7f 100644
> > --- a/net/ncsi/ncsi-rsp.c
> > +++ b/net/ncsi/ncsi-rsp.c
> > @@ -596,6 +596,37 @@ static int ncsi_rsp_handler_snfc(struct ncsi_request *nr)
> > return 0;
> > }
> >
> > +static int ncsi_rsp_handler_oem(struct ncsi_request *nr)
> > +{
> > + struct ncsi_rsp_oem_pkt *rsp;
> > + struct ncsi_dev_priv *ndp = nr->ndp;
> > + struct net_device *ndev = ndp->ndev.dev;
> > + int ret = 0;
> > + unsigned int oem_cmd, mfr_id;
> > + const struct net_device_ops *ops = ndev->netdev_ops;
> > + struct sockaddr saddr;
> > +
> > + /* Get the response header */
> > + rsp = (struct ncsi_rsp_oem_pkt *)skb_network_header(nr->rsp);
> > +
> > + oem_cmd = ntohl(rsp->oem_cmd);
> > + mfr_id = ntohl(rsp->mfr_id);
> > +
> > + /* Check for Mellanox manufacturer id */
> > + if (mfr_id != NCSI_OEM_MFR_MLX_ID)
> > + return 0;
> > +
> > + if (oem_cmd == NCSI_OEM_MLX_CMD_GET_MAC) {
> > + saddr.sa_family = ndev->type;
> > + ndev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
> > + memcpy(saddr.sa_data, &(rsp->data[4]), ETH_ALEN);
> > + ret = ops->ndo_set_mac_address(ndev, &saddr);
> > + if (ret < 0)
> > + netdev_warn(ndev, "NCSI: 'Writing mac address to device failed\n");
> > + }
> > + return ret;
> > +}
> > +
> > static int ncsi_rsp_handler_gvi(struct ncsi_request *nr)
> > {
> > struct ncsi_rsp_gvi_pkt *rsp;
> > @@ -932,7 +963,7 @@ static struct ncsi_rsp_handler {
> > { NCSI_PKT_RSP_GNS, 172, ncsi_rsp_handler_gns },
> > { NCSI_PKT_RSP_GNPTS, 172, ncsi_rsp_handler_gnpts },
> > { NCSI_PKT_RSP_GPS, 8, ncsi_rsp_handler_gps },
> > - { NCSI_PKT_RSP_OEM, 0, NULL },
> > + { NCSI_PKT_RSP_OEM, -1, ncsi_rsp_handler_oem },
> > { NCSI_PKT_RSP_PLDM, 0, NULL },
> > { NCSI_PKT_RSP_GPUUID, 20, ncsi_rsp_handler_gpuuid }
> > };
> > --
> > 2.17.1
> >
>
>
More information about the Linux-aspeed
mailing list