[PATCH] ARM: dts: aspeed: Add HXT StarDragon 4800 REP2 BMC
Joel Stanley
joel at jms.id.au
Thu Sep 20 17:31:00 AEST 2018
On Thu, 13 Sep 2018 at 15:32, Yao Yuan <yao.yuan at linaro.org> wrote:
>
> On 13 September 2018 at 11:01, Joel Stanley <joel at jms.id.au> wrote:
>>
>> > The HXT StarDragon 4800 REP2 (Reference Evaluation Platform) is
>> > an aarch64 ARMv8 server platform with an ast2520 BMC.
>> >
>> Looks good. I will apply it to the Aspeed tree in a few days, after
>> giving others a chance to review.
>>
>> Out of interest, are you planning on running OpenBMC on this platform?
>
>
> Yes, I will running OpenBMC on this platform.
> And In fact, the OpenBMC basic startup is already running on REP2.
> I'm also trying to push the OpenBMC patch for this platform.
Great!
>> > .../devicetree/bindings/vendor-prefixes.txt | 1 +
>> > arch/arm/boot/dts/Makefile | 1 +
>> > .../dts/aspeed-bmc-arm-stardragon4800-rep2.dts | 207 +++++++++++++++++++++
>> > 3 files changed, 209 insertions(+)
>> > create mode 100644 arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
>> >
>> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> > index 2c3fc51..c65c0c1 100644
>> > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
>> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> > @@ -165,6 +165,7 @@ honeywell Honeywell
>> > hp Hewlett Packard
>> > holtek Holtek Semiconductor, Inc.
>> > hwacom HwaCom Systems Inc.
>> > +hxt Huaxintong Semiconductor Technology Co., Ltd.
>> > i2se I2SE GmbH
>> > ibm International Business Machines (IBM)
>> > idt Integrated Device Technologies, Inc.
This part of the patch should go to the device tree mailing list in
it's own patch. That saves maintainers having to deal with conflicting
additions.
>> > diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
>> > new file mode 100644
>> > index 0000000..83335c0
>> > --- /dev/null
>> > +++ b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
>> > @@ -0,0 +1,207 @@
>> > +// SPDX-License-Identifier: GPL-2.0+
>> > +/dts-v1/;
>> > +
>> > +#include "aspeed-g5.dtsi"
>> > +#include <dt-bindings/gpio/aspeed-gpio.h>
>> > +
>> > +/ {
>> > + model = "HXT StarDragon 4800 REP2 AST2520";
>> > + compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500";
>> > +
>> > + chosen {
>> > + stdout-path = &uart5;
>> > + bootargs = "console=ttyS4,115200 earlyprintk";
>> > + };
>> > +
>> > + memory {
When building with W=1:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges
property, but no unit name
It should instead look like this:
memory at 80000000 {
The rest looks good to me. I made the fix for you and applied this to
the aspeed v4.20 device tree branch.
I added the device tree maintainers to cc so they could take a look.
If any comments come up please address them in follow up patches.
Cheers,
Joel
>> > + reg = <0x80000000 0x40000000>;
>> > + };
>> > +
>> > + iio-hwmon {
>> > + compatible = "iio-hwmon";
>> > + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
>> > + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
>> > + };
>> > +
>> > + iio-hwmon-battery {
>> > + compatible = "iio-hwmon";
>> > + io-channels = <&adc 7>;
>> > + };
>> > +
>> > + leds {
>> > + compatible = "gpio-leds";
>> > +
>> > + system_fault1 {
>> > + label = "System_fault1";
>> > + gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
>> > + };
>> > +
>> > + system_fault2 {
>> > + label = "System_fault2";
>> > + gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>;
>> > + };
>> > + };
>> > +};
>> > +
>> > +&fmc {
>> > + status = "okay";
>> > + flash at 0 {
>> > + status = "okay";
>> > + m25p,fast-read;
>> > + label = "bmc";
>> > +#include "openbmc-flash-layout.dtsi"
>> > + };
>> > +};
>> > +
>> > +&spi1 {
>> > + status = "okay";
>> > + pinctrl-names = "default";
>> > + pinctrl-0 = <&pinctrl_spi1_default>;
>> > + flash at 0 {
>> > + status = "okay";
>> > + };
>> > +};
>> > +
>> > +&spi2 {
>> > + pinctrl-names = "default";
>> > + pinctrl-0 = <&pinctrl_spi2ck_default
>> > + &pinctrl_spi2miso_default
>> > + &pinctrl_spi2mosi_default
>> > + &pinctrl_spi2cs0_default>;
>> > +};
>> > +
>> > +&uart3 {
>> > + status = "okay";
>> > +
>> > + pinctrl-names = "default";
>> > + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
>> > + current-speed = <115200>;
>> > +};
>> > +
>> > +&uart5 {
>> > + status = "okay";
>> > +};
>> > +
>> > +&mac0 {
>> > + status = "okay";
>> > + pinctrl-names = "default";
>> > + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
>> > +};
>> > +
>> > +&mac1 {
>> > + status = "okay";
>> > + pinctrl-names = "default";
>> > + pinctrl-0 = <&pinctrl_rmii2_default>;
>> > + use-ncsi;
>> > +};
>> > +
>> > +&i2c0 {
>> > + status = "okay";
>> > +};
>> > +
>> > +&i2c1 {
>> > + status = "okay";
>> > +
>> > + tmp421 at 1e {
>> > + compatible = "ti,tmp421";
>> > + reg = <0x1e>;
>> > + };
>> > + tmp421 at 2a {
>> > + compatible = "ti,tmp421";
>> > + reg = <0x2a>;
>> > + };
>> > + tmp421 at 1c {
>> > + compatible = "ti,tmp421";
>> > + reg = <0x1c>;
>> > + };
>> > +};
>> > +
>> > +&i2c2 {
>> > + status = "okay";
>> > +};
>> > +
>> > +&i2c3 {
>> > + status = "okay";
>> > +};
>> > +
>> > +&i2c4 {
>> > + status = "okay";
>> > +};
>> > +
>> > +&i2c5 {
>> > + status = "okay";
>> > +};
>> > +
>> > +&i2c6 {
>> > + status = "okay";
>> > +
>> > + tmp421 at 1f {
>> > + compatible = "ti,tmp421";
>> > + reg = <0x1f>;
>> > + };
>> > + nvt210 at 4c {
>> > + compatible = "nvt210";
>> > + reg = <0x4c>;
>> > + };
>> > + eeprom at 50 {
>> > + compatible = "atmel,24c128";
>> > + reg = <0x50>;
>> > + pagesize = <128>;
>> > + };
>> > +};
>> > +
>> > +&i2c7 {
>> > + status = "okay";
>> > +};
>> > +
>> > +&i2c8 {
>> > + status = "okay";
>> > +
>> > + pca9641 at 70 {
>> > + compatible = "nxp,pca9641";
>> > + reg = <0x70>;
>> > + i2c-arb {
>> > + #address-cells = <1>;
>> > + #size-cells = <0>;
>> > + eeprom at 50 {
>> > + compatible = "atmel,24c02";
>> > + reg = <0x50>;
>> > + };
>> > + dps650ab at 58 {
>> > + compatible = "dps650ab";
>> > + reg = <0x58>;
>> > + };
>> > + };
>> > + };
>> > +};
>> > +
>> > +&i2c9 {
>> > + status = "okay";
>> > +};
>> > +
>> > +&vuart {
>> > + status = "okay";
>> > +};
>> > +
>> > +&gfx {
>> > + status = "okay";
>> > +};
>> > +
>> > +&pinctrl {
>> > + aspeed,external-nodes = <&gfx &lhc>;
>> > +};
>> > +
>> > +&gpio {
>> > + pin_gpio_c7 {
>> > + gpio-hog;
>> > + gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
>> > + output-low;
>> > + line-name = "BIOS_SPI_MUX_S";
>> > + };
>> > + pin_gpio_d1 {
>> > + gpio-hog;
>> > + gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
>> > + output-high;
>> > + line-name = "PHY2_RESET_N";
>> > + };
>> > +};
>> > --
>> > 1.8.3.1
>> >
>
>
More information about the Linux-aspeed
mailing list