[PATCH net-next v3 1/2] net/ncsi: Add NCSI Broadcom OEM command

Vijay Khemka vijaykhemka at fb.com
Fri Oct 12 10:05:17 AEDT 2018


This patch adds OEM Broadcom commands and response handling. It also
defines OEM Get MAC Address handler to get and configure the device.

ncsi_oem_gma_handler_bcm: This handler send NCSI broadcom command for
getting mac address.
ncsi_rsp_handler_oem_bcm: This handles response received for all
broadcom OEM commands.
ncsi_rsp_handler_oem_bcm_gma: This handles get mac address response and
set it to device.

Signed-off-by: Vijay Khemka <vijaykhemka at fb.com>
---
 net/ncsi/Kconfig       |  6 ++++
 net/ncsi/internal.h    |  8 +++++
 net/ncsi/ncsi-manage.c | 70 ++++++++++++++++++++++++++++++++++++++++++
 net/ncsi/ncsi-pkt.h    |  8 +++++
 net/ncsi/ncsi-rsp.c    | 40 +++++++++++++++++++++++-
 5 files changed, 131 insertions(+), 1 deletion(-)

diff --git a/net/ncsi/Kconfig b/net/ncsi/Kconfig
index 08a8a6031fd7..7f2b46108a24 100644
--- a/net/ncsi/Kconfig
+++ b/net/ncsi/Kconfig
@@ -10,3 +10,9 @@ config NET_NCSI
 	  support. Enable this only if your system connects to a network
 	  device via NCSI and the ethernet driver you're using supports
 	  the protocol explicitly.
+config NCSI_OEM_CMD_GET_MAC
+	bool "Get NCSI OEM MAC Address"
+	depends on NET_NCSI
+	---help---
+	  This allows to get MAC address from NCSI firmware and set them back to
+		controller.
diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
index 3d0a33b874f5..45883b32790e 100644
--- a/net/ncsi/internal.h
+++ b/net/ncsi/internal.h
@@ -71,6 +71,13 @@ enum {
 /* OEM Vendor Manufacture ID */
 #define NCSI_OEM_MFR_MLX_ID             0x8119
 #define NCSI_OEM_MFR_BCM_ID             0x113d
+/* Broadcom specific OEM Command */
+#define NCSI_OEM_BCM_CMD_GMA            0x01   /* CMD ID for Get MAC */
+/* OEM Command payload lengths*/
+#define NCSI_OEM_BCM_CMD_GMA_LEN        12
+/* Mac address offset in OEM response */
+#define BCM_MAC_ADDR_OFFSET             28
+
 
 struct ncsi_channel_version {
 	u32 version;		/* Supported BCD encoded NCSI version */
@@ -240,6 +247,7 @@ enum {
 	ncsi_dev_state_probe_dp,
 	ncsi_dev_state_config_sp	= 0x0301,
 	ncsi_dev_state_config_cis,
+	ncsi_dev_state_config_oem_gma,
 	ncsi_dev_state_config_clear_vids,
 	ncsi_dev_state_config_svf,
 	ncsi_dev_state_config_ev,
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index 091284760d21..75504ccd1b95 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -635,6 +635,39 @@ static int set_one_vid(struct ncsi_dev_priv *ndp, struct ncsi_channel *nc,
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)
+
+/* NCSI OEM Command APIs */
+static void ncsi_oem_gma_handler_bcm(struct ncsi_cmd_arg *nca)
+{
+	int ret = 0;
+	unsigned char data[NCSI_OEM_BCM_CMD_GMA_LEN];
+
+	nca->payload = NCSI_OEM_BCM_CMD_GMA_LEN;
+
+	memset(data, 0, NCSI_OEM_BCM_CMD_GMA_LEN);
+	*(unsigned int *)data = ntohl(NCSI_OEM_MFR_BCM_ID);
+	data[5] = NCSI_OEM_BCM_CMD_GMA;
+
+	nca->data = data;
+
+	ret = ncsi_xmit_cmd(nca);
+	if (ret)
+		netdev_err(nca->ndp->ndev.dev,
+			   "NCSI: Failed to transmit cmd 0x%x during configure\n",
+			   nca->type);
+}
+
+/* OEM Command handlers initialization */
+static struct ncsi_oem_gma_handler {
+	unsigned int	mfr_id;
+	void		(*handler)(struct ncsi_cmd_arg *nca);
+} ncsi_oem_gma_handlers[] = {
+	{ NCSI_OEM_MFR_BCM_ID, ncsi_oem_gma_handler_bcm }
+};
+
+#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */
+
 static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 {
 	struct ncsi_dev *nd = &ndp->ndev;
@@ -685,6 +718,43 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 			goto error;
 		}
 
+#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)
+		nd->state = ncsi_dev_state_config_oem_gma;
+		break;
+	case ncsi_dev_state_config_oem_gma:
+		nca.type = NCSI_PKT_CMD_OEM;
+		nca.package = np->id;
+		nca.channel = nc->id;
+		ndp->pending_req_num = 1;
+
+		/* Check for manufacturer id and Find the handler */
+		struct ncsi_oem_gma_handler *nch = NULL;
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(ncsi_oem_gma_handlers); i++) {
+			if (ncsi_oem_gma_handlers[i].mfr_id ==
+					nc->version.mf_id) {
+				if (ncsi_oem_gma_handlers[i].handler)
+					nch = &ncsi_oem_gma_handlers[i];
+				else
+					nch = NULL;
+
+				break;
+			}
+		}
+
+		if (!nch) {
+			netdev_err(ndp->ndev.dev, "No handler available for GMA with MFR-ID (0x%x)\n",
+				   nc->version.mf_id);
+			nd->state = ncsi_dev_state_config_clear_vids;
+			schedule_work(&ndp->work);
+			break;
+		}
+
+		/* Get Mac address from NCSI device */
+		nch->handler(&nca);
+#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */
+
 		nd->state = ncsi_dev_state_config_clear_vids;
 		break;
 	case ncsi_dev_state_config_clear_vids:
diff --git a/net/ncsi/ncsi-pkt.h b/net/ncsi/ncsi-pkt.h
index 0f2087c8d42a..4d3f06be38bd 100644
--- a/net/ncsi/ncsi-pkt.h
+++ b/net/ncsi/ncsi-pkt.h
@@ -165,6 +165,14 @@ struct ncsi_rsp_oem_pkt {
 	unsigned char           data[];      /* Payload data      */
 };
 
+/* Broadcom Response Data */
+struct ncsi_rsp_oem_bcm_pkt {
+	unsigned char           ver;         /* Payload Version   */
+	unsigned char           type;        /* OEM Command type  */
+	__be16                  len;         /* Payload Length    */
+	unsigned char           data[];      /* Cmd specific Data */
+};
+
 /* Get Link Status */
 struct ncsi_rsp_gls_pkt {
 	struct ncsi_rsp_pkt_hdr rsp;        /* Response header   */
diff --git a/net/ncsi/ncsi-rsp.c b/net/ncsi/ncsi-rsp.c
index d66b34749027..31672e967db2 100644
--- a/net/ncsi/ncsi-rsp.c
+++ b/net/ncsi/ncsi-rsp.c
@@ -596,12 +596,50 @@ static int ncsi_rsp_handler_snfc(struct ncsi_request *nr)
 	return 0;
 }
 
+/* Response handler for Broadcom command Get Mac Address */
+static int ncsi_rsp_handler_oem_bcm_gma(struct ncsi_request *nr)
+{
+	struct ncsi_rsp_oem_pkt *rsp;
+	struct ncsi_dev_priv *ndp = nr->ndp;
+	struct net_device *ndev = ndp->ndev.dev;
+	int ret = 0;
+	const struct net_device_ops *ops = ndev->netdev_ops;
+	struct sockaddr saddr;
+
+	/* Get the response header */
+	rsp = (struct ncsi_rsp_oem_pkt *)skb_network_header(nr->rsp);
+
+	saddr.sa_family = ndev->type;
+	ndev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
+	memcpy(saddr.sa_data, &rsp->data[BCM_MAC_ADDR_OFFSET], ETH_ALEN);
+	ret = ops->ndo_set_mac_address(ndev, &saddr);
+	if (ret < 0)
+		netdev_warn(ndev, "NCSI: Writing mac address to device failed\n");
+
+	return ret;
+}
+
+/* Response handler for Broadcom card */
+static int ncsi_rsp_handler_oem_bcm(struct ncsi_request *nr)
+{
+	struct ncsi_rsp_oem_pkt *rsp;
+	struct ncsi_rsp_oem_bcm_pkt *bcm;
+
+	/* Get the response header */
+	rsp = (struct ncsi_rsp_oem_pkt *)skb_network_header(nr->rsp);
+	bcm = (struct ncsi_rsp_oem_bcm_pkt *)(rsp->data);
+
+	if (bcm->type == NCSI_OEM_BCM_CMD_GMA)
+		return ncsi_rsp_handler_oem_bcm_gma(nr);
+	return 0;
+}
+
 static struct ncsi_rsp_oem_handler {
 	unsigned int	mfr_id;
 	int		(*handler)(struct ncsi_request *nr);
 } ncsi_rsp_oem_handlers[] = {
 	{ NCSI_OEM_MFR_MLX_ID, NULL },
-	{ NCSI_OEM_MFR_BCM_ID, NULL }
+	{ NCSI_OEM_MFR_BCM_ID, ncsi_rsp_handler_oem_bcm }
 };
 
 /* Response handler for OEM command */
-- 
2.17.1



More information about the Linux-aspeed mailing list