[PATCH v5 2/2] media: platform: Add Aspeed Video Engine driver
Hans Verkuil
hverkuil at xs4all.nl
Thu Nov 15 19:56:06 AEDT 2018
On 11/12/2018 10:00 PM, Eddie James wrote:
> The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs
> can capture and compress video data from digital or analog sources. With
> the Aspeed chip acting a service processor, the Video Engine can capture
> the host processor graphics output.
>
> Add a V4L2 driver to capture video data and compress it to JPEG images.
> Make the video frames available through the V4L2 streaming interface.
>
> Signed-off-by: Eddie James <eajames at linux.ibm.com>
> ---
> MAINTAINERS | 8 +
> drivers/media/platform/Kconfig | 9 +
> drivers/media/platform/Makefile | 1 +
> drivers/media/platform/aspeed-video.c | 1711 +++++++++++++++++++++++++++++++++
> 4 files changed, 1729 insertions(+)
> create mode 100644 drivers/media/platform/aspeed-video.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index fa45ff3..f8f08a4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2414,6 +2414,14 @@ S: Maintained
> F: Documentation/hwmon/asc7621
> F: drivers/hwmon/asc7621.c
>
> +ASPEED VIDEO ENGINE DRIVER
> +M: Eddie James <eajames at linux.ibm.com>
> +L: linux-media at vger.kernel.org
> +L: openbmc at lists.ozlabs.org (moderated for non-subscribers)
> +S: Maintained
> +F: drivers/media/platform/aspeed-video.c
> +F: Documentation/devicetree/bindings/media/aspeed-video.txt
> +
> ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS
> M: Corentin Chary <corentin.chary at gmail.com>
> L: acpi4asus-user at lists.sourceforge.net
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index 70c4f6c..ba78dd5 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -32,6 +32,15 @@ source "drivers/media/platform/davinci/Kconfig"
>
> source "drivers/media/platform/omap/Kconfig"
>
> +config VIDEO_ASPEED
> + tristate "Aspeed AST2400 and AST2500 Video Engine driver"
> + depends on VIDEO_V4L2
> + select VIDEOBUF2_DMA_CONTIG
> + help
> + Support for the Aspeed Video Engine (VE) embedded in the Aspeed
> + AST2400 and AST2500 SOCs. The VE can capture and compress video data
> + from digital or analog sources.
> +
> config VIDEO_SH_VOU
> tristate "SuperH VOU video output driver"
> depends on MEDIA_CAMERA_SUPPORT
> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
> index 6ab6200..2973953 100644
> --- a/drivers/media/platform/Makefile
> +++ b/drivers/media/platform/Makefile
> @@ -3,6 +3,7 @@
> # Makefile for the video capture/playback device drivers.
> #
>
> +obj-$(CONFIG_VIDEO_ASPEED) += aspeed-video.o
> obj-$(CONFIG_VIDEO_CADENCE) += cadence/
> obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
> obj-$(CONFIG_VIDEO_CAFE_CCIC) += marvell-ccic/
> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
> new file mode 100644
> index 0000000..a2fd0bf
> --- /dev/null
> +++ b/drivers/media/platform/aspeed-video.c
> @@ -0,0 +1,1711 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +
> +#include <linux/atomic.h>
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/interrupt.h>
> +#include <linux/jiffies.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_reserved_mem.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/sched.h>
> +#include <linux/spinlock.h>
> +#include <linux/string.h>
> +#include <linux/v4l2-controls.h>
> +#include <linux/videodev2.h>
> +#include <linux/wait.h>
> +#include <linux/workqueue.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-dev.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/videobuf2-dma-contig.h>
> +
> +#define DEVICE_NAME "aspeed-video"
> +
> +#define ASPEED_VIDEO_JPEG_NUM_QUALITIES 12
> +#define ASPEED_VIDEO_JPEG_HEADER_SIZE 10
> +#define ASPEED_VIDEO_JPEG_QUANT_SIZE 116
> +#define ASPEED_VIDEO_JPEG_DCT_SIZE 34
> +
> +#define MAX_FRAME_RATE 60
> +#define MAX_HEIGHT 1200
> +#define MAX_WIDTH 1920
> +#define MIN_HEIGHT 480
> +#define MIN_WIDTH 640
> +
> +#define NUM_POLARITY_CHECKS 10
> +#define INVALID_RESOLUTION_RETRIES 2
> +#define INVALID_RESOLUTION_DELAY msecs_to_jiffies(250)
> +#define RESOLUTION_CHANGE_DELAY msecs_to_jiffies(500)
> +#define MODE_DETECT_TIMEOUT msecs_to_jiffies(500)
> +#define STOP_TIMEOUT msecs_to_jiffies(250)
> +#define DIRECT_FETCH_THRESHOLD 0x0c0000 /* 1024 * 768 */
> +
> +#define VE_MAX_SRC_BUFFER_SIZE 0x8ca000 /* 1920 * 1200, 32bpp */
> +#define VE_JPEG_HEADER_SIZE 0x006000 /* 512 * 12 * 4 */
> +
> +#define VE_PROTECTION_KEY 0x000
> +#define VE_PROTECTION_KEY_UNLOCK 0x1a038aa8
> +
> +#define VE_SEQ_CTRL 0x004
> +#define VE_SEQ_CTRL_TRIG_MODE_DET BIT(0)
> +#define VE_SEQ_CTRL_TRIG_CAPTURE BIT(1)
> +#define VE_SEQ_CTRL_FORCE_IDLE BIT(2)
> +#define VE_SEQ_CTRL_MULT_FRAME BIT(3)
> +#define VE_SEQ_CTRL_TRIG_COMP BIT(4)
> +#define VE_SEQ_CTRL_AUTO_COMP BIT(5)
> +#define VE_SEQ_CTRL_EN_WATCHDOG BIT(7)
> +#define VE_SEQ_CTRL_YUV420 BIT(10)
> +#define VE_SEQ_CTRL_COMP_FMT GENMASK(11, 10)
> +#define VE_SEQ_CTRL_HALT BIT(12)
> +#define VE_SEQ_CTRL_EN_WATCHDOG_COMP BIT(14)
> +#define VE_SEQ_CTRL_TRIG_JPG BIT(15)
> +#define VE_SEQ_CTRL_CAP_BUSY BIT(16)
> +#define VE_SEQ_CTRL_COMP_BUSY BIT(18)
> +
> +#ifdef CONFIG_MACH_ASPEED_G5
> +#define VE_SEQ_CTRL_JPEG_MODE BIT(13) /* AST2500 */
> +#else
> +#define VE_SEQ_CTRL_JPEG_MODE BIT(8) /* AST2400 */
> +#endif /* CONFIG_MACH_ASPEED_G5 */
> +
> +#define VE_CTRL 0x008
> +#define VE_CTRL_HSYNC_POL BIT(0)
> +#define VE_CTRL_VSYNC_POL BIT(1)
> +#define VE_CTRL_SOURCE BIT(2)
> +#define VE_CTRL_INT_DE BIT(4)
> +#define VE_CTRL_DIRECT_FETCH BIT(5)
> +#define VE_CTRL_YUV BIT(6)
> +#define VE_CTRL_RGB BIT(7)
> +#define VE_CTRL_CAPTURE_FMT GENMASK(7, 6)
> +#define VE_CTRL_AUTO_OR_CURSOR BIT(8)
> +#define VE_CTRL_CLK_INVERSE BIT(11)
> +#define VE_CTRL_CLK_DELAY GENMASK(11, 9)
> +#define VE_CTRL_INTERLACE BIT(14)
> +#define VE_CTRL_HSYNC_POL_CTRL BIT(15)
> +#define VE_CTRL_FRC GENMASK(23, 16)
> +
> +#define VE_TGS_0 0x00c
> +#define VE_TGS_1 0x010
> +#define VE_TGS_FIRST GENMASK(28, 16)
> +#define VE_TGS_LAST GENMASK(12, 0)
> +
> +#define VE_SCALING_FACTOR 0x014
> +#define VE_SCALING_FILTER0 0x018
> +#define VE_SCALING_FILTER1 0x01c
> +#define VE_SCALING_FILTER2 0x020
> +#define VE_SCALING_FILTER3 0x024
> +
> +#define VE_CAP_WINDOW 0x030
> +#define VE_COMP_WINDOW 0x034
> +#define VE_COMP_PROC_OFFSET 0x038
> +#define VE_COMP_OFFSET 0x03c
> +#define VE_JPEG_ADDR 0x040
> +#define VE_SRC0_ADDR 0x044
> +#define VE_SRC_SCANLINE_OFFSET 0x048
> +#define VE_SRC1_ADDR 0x04c
> +#define VE_COMP_ADDR 0x054
> +
> +#define VE_STREAM_BUF_SIZE 0x058
> +#define VE_STREAM_BUF_SIZE_N_PACKETS GENMASK(5, 3)
> +#define VE_STREAM_BUF_SIZE_P_SIZE GENMASK(2, 0)
> +
> +#define VE_COMP_CTRL 0x060
> +#define VE_COMP_CTRL_VQ_DCT_ONLY BIT(0)
> +#define VE_COMP_CTRL_VQ_4COLOR BIT(1)
> +#define VE_COMP_CTRL_QUANTIZE BIT(2)
> +#define VE_COMP_CTRL_EN_BQ BIT(4)
> +#define VE_COMP_CTRL_EN_CRYPTO BIT(5)
> +#define VE_COMP_CTRL_DCT_CHR GENMASK(10, 6)
> +#define VE_COMP_CTRL_DCT_LUM GENMASK(15, 11)
> +#define VE_COMP_CTRL_EN_HQ BIT(16)
> +#define VE_COMP_CTRL_RSVD BIT(19)
> +#define VE_COMP_CTRL_ENCODE GENMASK(21, 20)
> +#define VE_COMP_CTRL_HQ_DCT_CHR GENMASK(26, 22)
> +#define VE_COMP_CTRL_HQ_DCT_LUM GENMASK(31, 27)
> +
> +#define VE_OFFSET_COMP_STREAM 0x078
> +
> +#define VE_SRC_LR_EDGE_DET 0x090
> +#define VE_SRC_LR_EDGE_DET_LEFT GENMASK(11, 0)
> +#define VE_SRC_LR_EDGE_DET_NO_V BIT(12)
> +#define VE_SRC_LR_EDGE_DET_NO_H BIT(13)
> +#define VE_SRC_LR_EDGE_DET_NO_DISP BIT(14)
> +#define VE_SRC_LR_EDGE_DET_NO_CLK BIT(15)
> +#define VE_SRC_LR_EDGE_DET_RT_SHF 16
> +#define VE_SRC_LR_EDGE_DET_RT GENMASK(27, VE_SRC_LR_EDGE_DET_RT_SHF)
> +#define VE_SRC_LR_EDGE_DET_INTERLACE BIT(31)
> +
> +#define VE_SRC_TB_EDGE_DET 0x094
> +#define VE_SRC_TB_EDGE_DET_TOP GENMASK(12, 0)
> +#define VE_SRC_TB_EDGE_DET_BOT_SHF 16
> +#define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF)
> +
> +#define VE_MODE_DETECT_STATUS 0x098
> +#define VE_MODE_DETECT_H_PIXELS GENMASK(11, 0)
> +#define VE_MODE_DETECT_V_LINES_SHF 16
> +#define VE_MODE_DETECT_V_LINES GENMASK(27, VE_MODE_DETECT_V_LINES_SHF)
> +#define VE_MODE_DETECT_STATUS_VSYNC BIT(28)
> +#define VE_MODE_DETECT_STATUS_HSYNC BIT(29)
> +
> +#define VE_SYNC_STATUS 0x09c
> +#define VE_SYNC_STATUS_HSYNC GENMASK(11, 0)
> +#define VE_SYNC_STATUS_VSYNC_SHF 16
> +#define VE_SYNC_STATUS_VSYNC GENMASK(27, VE_SYNC_STATUS_VSYNC_SHF)
> +
> +#define VE_INTERRUPT_CTRL 0x304
> +#define VE_INTERRUPT_STATUS 0x308
> +#define VE_INTERRUPT_MODE_DETECT_WD BIT(0)
> +#define VE_INTERRUPT_CAPTURE_COMPLETE BIT(1)
> +#define VE_INTERRUPT_COMP_READY BIT(2)
> +#define VE_INTERRUPT_COMP_COMPLETE BIT(3)
> +#define VE_INTERRUPT_MODE_DETECT BIT(4)
> +#define VE_INTERRUPT_FRAME_COMPLETE BIT(5)
> +#define VE_INTERRUPT_DECODE_ERR BIT(6)
> +#define VE_INTERRUPT_HALT_READY BIT(8)
> +#define VE_INTERRUPT_HANG_WD BIT(9)
> +#define VE_INTERRUPT_STREAM_DESC BIT(10)
> +#define VE_INTERRUPT_VSYNC_DESC BIT(11)
> +
> +#define VE_MODE_DETECT 0x30c
> +#define VE_MEM_RESTRICT_START 0x310
> +#define VE_MEM_RESTRICT_END 0x314
> +
> +enum {
> + VIDEO_MODE_DETECT_DONE,
> + VIDEO_RES_CHANGE,
> + VIDEO_STREAMING,
> + VIDEO_FRAME_INPRG,
> +};
> +
> +struct aspeed_video_addr {
> + unsigned int size;
> + dma_addr_t dma;
> + void *virt;
> +};
> +
> +struct aspeed_video_buffer {
> + struct vb2_v4l2_buffer vb;
> + struct list_head link;
> +};
> +
> +#define to_aspeed_video_buffer(x) \
> + container_of((x), struct aspeed_video_buffer, vb)
> +
> +struct aspeed_video {
> + void __iomem *base;
> + struct clk *eclk;
> + struct clk *vclk;
> + struct reset_control *rst;
> +
> + struct device *dev;
> + struct v4l2_ctrl_handler ctrl_handler;
> + struct v4l2_device v4l2_dev;
> + struct v4l2_pix_format pix_fmt;
> + struct v4l2_bt_timings timings;
You need two v4l2_bt_timings structs here:
struct v4l2_bt_timings active_timings;
struct v4l2_bt_timings detected_timings;
The first is what s_dv_timings set (and must also be initialized to
some timing at probe time), the second is what aspeed_video_get_resolution
fills in.
See more about this below.
> + struct vb2_queue queue;
> + struct video_device vdev;
> + struct mutex video_lock;
> +
> + atomic_t clients;
> + wait_queue_head_t wait;
> + spinlock_t lock;
> + struct delayed_work res_work;
> + struct list_head buffers;
> + unsigned long flags;
> + unsigned int sequence;
> +
> + unsigned int max_compressed_size;
> + struct aspeed_video_addr srcs[2];
> + struct aspeed_video_addr jpeg;
> + struct aspeed_video_addr detect;
> +
> + bool yuv420;
> + unsigned int frame_rate;
> + unsigned int jpeg_quality;
> + unsigned int capture_height;
> + unsigned int capture_width;
> +};
> +
> +#define to_aspeed_video(x) container_of((x), struct aspeed_video, v4l2_dev)
> +
> +static const u32 aspeed_video_jpeg_header[ASPEED_VIDEO_JPEG_HEADER_SIZE] = {
> + 0xe0ffd8ff, 0x464a1000, 0x01004649, 0x60000101, 0x00006000, 0x0f00feff,
> + 0x00002d05, 0x00000000, 0x00000000, 0x00dbff00
> +};
> +
> +static const u32 aspeed_video_jpeg_quant[ASPEED_VIDEO_JPEG_QUANT_SIZE] = {
> + 0x081100c0, 0x00000000, 0x00110103, 0x03011102, 0xc4ff0111, 0x00001f00,
> + 0x01010501, 0x01010101, 0x00000000, 0x00000000, 0x04030201, 0x08070605,
> + 0xff0b0a09, 0x10b500c4, 0x03010200, 0x03040203, 0x04040505, 0x7d010000,
> + 0x00030201, 0x12051104, 0x06413121, 0x07615113, 0x32147122, 0x08a19181,
> + 0xc1b14223, 0xf0d15215, 0x72623324, 0x160a0982, 0x1a191817, 0x28272625,
> + 0x35342a29, 0x39383736, 0x4544433a, 0x49484746, 0x5554534a, 0x59585756,
> + 0x6564635a, 0x69686766, 0x7574736a, 0x79787776, 0x8584837a, 0x89888786,
> + 0x9493928a, 0x98979695, 0xa3a29a99, 0xa7a6a5a4, 0xb2aaa9a8, 0xb6b5b4b3,
> + 0xbab9b8b7, 0xc5c4c3c2, 0xc9c8c7c6, 0xd4d3d2ca, 0xd8d7d6d5, 0xe2e1dad9,
> + 0xe6e5e4e3, 0xeae9e8e7, 0xf4f3f2f1, 0xf8f7f6f5, 0xc4fffaf9, 0x00011f00,
> + 0x01010103, 0x01010101, 0x00000101, 0x00000000, 0x04030201, 0x08070605,
> + 0xff0b0a09, 0x11b500c4, 0x02010200, 0x04030404, 0x04040507, 0x77020100,
> + 0x03020100, 0x21050411, 0x41120631, 0x71610751, 0x81322213, 0x91421408,
> + 0x09c1b1a1, 0xf0523323, 0xd1726215, 0x3424160a, 0x17f125e1, 0x261a1918,
> + 0x2a292827, 0x38373635, 0x44433a39, 0x48474645, 0x54534a49, 0x58575655,
> + 0x64635a59, 0x68676665, 0x74736a69, 0x78777675, 0x83827a79, 0x87868584,
> + 0x928a8988, 0x96959493, 0x9a999897, 0xa5a4a3a2, 0xa9a8a7a6, 0xb4b3b2aa,
> + 0xb8b7b6b5, 0xc3c2bab9, 0xc7c6c5c4, 0xd2cac9c8, 0xd6d5d4d3, 0xdad9d8d7,
> + 0xe5e4e3e2, 0xe9e8e7e6, 0xf4f3f2ea, 0xf8f7f6f5, 0xdafffaf9, 0x01030c00,
> + 0x03110200, 0x003f0011
> +};
> +
> +static const u32 aspeed_video_jpeg_dct[ASPEED_VIDEO_JPEG_NUM_QUALITIES]
> + [ASPEED_VIDEO_JPEG_DCT_SIZE] = {
> + { 0x0d140043, 0x0c0f110f, 0x11101114, 0x17141516, 0x1e20321e,
> + 0x3d1e1b1b, 0x32242e2b, 0x4b4c3f48, 0x44463f47, 0x61735a50,
> + 0x566c5550, 0x88644644, 0x7a766c65, 0x4d808280, 0x8c978d60,
> + 0x7e73967d, 0xdbff7b80, 0x1f014300, 0x272d2121, 0x3030582d,
> + 0x697bb958, 0xb8b9b97b, 0xb9b8a6a6, 0xb9b9b9b9, 0xb9b9b9b9,
> + 0xb9b9b9b9, 0xb9b9b9b9, 0xb9b9b9b9, 0xb9b9b9b9, 0xb9b9b9b9,
> + 0xb9b9b9b9, 0xb9b9b9b9, 0xb9b9b9b9, 0xffb9b9b9 },
> + { 0x0c110043, 0x0a0d0f0d, 0x0f0e0f11, 0x14111213, 0x1a1c2b1a,
> + 0x351a1818, 0x2b1f2826, 0x4142373f, 0x3c3d373e, 0x55644e46,
> + 0x4b5f4a46, 0x77573d3c, 0x6b675f58, 0x43707170, 0x7a847b54,
> + 0x6e64836d, 0xdbff6c70, 0x1b014300, 0x22271d1d, 0x2a2a4c27,
> + 0x5b6ba04c, 0xa0a0a06b, 0xa0a0a0a0, 0xa0a0a0a0, 0xa0a0a0a0,
> + 0xa0a0a0a0, 0xa0a0a0a0, 0xa0a0a0a0, 0xa0a0a0a0, 0xa0a0a0a0,
> + 0xa0a0a0a0, 0xa0a0a0a0, 0xa0a0a0a0, 0xffa0a0a0 },
> + { 0x090e0043, 0x090a0c0a, 0x0c0b0c0e, 0x110e0f10, 0x15172415,
> + 0x2c151313, 0x241a211f, 0x36372e34, 0x31322e33, 0x4653413a,
> + 0x3e4e3d3a, 0x62483231, 0x58564e49, 0x385d5e5d, 0x656d6645,
> + 0x5b536c5a, 0xdbff595d, 0x16014300, 0x1c201818, 0x22223f20,
> + 0x4b58853f, 0x85858558, 0x85858585, 0x85858585, 0x85858585,
> + 0x85858585, 0x85858585, 0x85858585, 0x85858585, 0x85858585,
> + 0x85858585, 0x85858585, 0x85858585, 0xff858585 },
> + { 0x070b0043, 0x07080a08, 0x0a090a0b, 0x0d0b0c0c, 0x11121c11,
> + 0x23110f0f, 0x1c141a19, 0x2b2b2429, 0x27282428, 0x3842332e,
> + 0x313e302e, 0x4e392827, 0x46443e3a, 0x2c4a4a4a, 0x50565137,
> + 0x48425647, 0xdbff474a, 0x12014300, 0x161a1313, 0x1c1c331a,
> + 0x3d486c33, 0x6c6c6c48, 0x6c6c6c6c, 0x6c6c6c6c, 0x6c6c6c6c,
> + 0x6c6c6c6c, 0x6c6c6c6c, 0x6c6c6c6c, 0x6c6c6c6c, 0x6c6c6c6c,
> + 0x6c6c6c6c, 0x6c6c6c6c, 0x6c6c6c6c, 0xff6c6c6c },
> + { 0x06090043, 0x05060706, 0x07070709, 0x0a09090a, 0x0d0e160d,
> + 0x1b0d0c0c, 0x16101413, 0x21221c20, 0x1e1f1c20, 0x2b332824,
> + 0x26302624, 0x3d2d1f1e, 0x3735302d, 0x22393a39, 0x3f443f2b,
> + 0x38334338, 0xdbff3739, 0x0d014300, 0x11130e0e, 0x15152613,
> + 0x2d355026, 0x50505035, 0x50505050, 0x50505050, 0x50505050,
> + 0x50505050, 0x50505050, 0x50505050, 0x50505050, 0x50505050,
> + 0x50505050, 0x50505050, 0x50505050, 0xff505050 },
> + { 0x04060043, 0x03040504, 0x05040506, 0x07060606, 0x09090f09,
> + 0x12090808, 0x0f0a0d0d, 0x16161315, 0x14151315, 0x1d221b18,
> + 0x19201918, 0x281e1514, 0x2423201e, 0x17262726, 0x2a2d2a1c,
> + 0x25222d25, 0xdbff2526, 0x09014300, 0x0b0d0a0a, 0x0e0e1a0d,
> + 0x1f25371a, 0x37373725, 0x37373737, 0x37373737, 0x37373737,
> + 0x37373737, 0x37373737, 0x37373737, 0x37373737, 0x37373737,
> + 0x37373737, 0x37373737, 0x37373737, 0xff373737 },
> + { 0x02030043, 0x01020202, 0x02020203, 0x03030303, 0x04040704,
> + 0x09040404, 0x07050606, 0x0b0b090a, 0x0a0a090a, 0x0e110d0c,
> + 0x0c100c0c, 0x140f0a0a, 0x1211100f, 0x0b131313, 0x1516150e,
> + 0x12111612, 0xdbff1213, 0x04014300, 0x05060505, 0x07070d06,
> + 0x0f121b0d, 0x1b1b1b12, 0x1b1b1b1b, 0x1b1b1b1b, 0x1b1b1b1b,
> + 0x1b1b1b1b, 0x1b1b1b1b, 0x1b1b1b1b, 0x1b1b1b1b, 0x1b1b1b1b,
> + 0x1b1b1b1b, 0x1b1b1b1b, 0x1b1b1b1b, 0xff1b1b1b },
> + { 0x01020043, 0x01010101, 0x01010102, 0x02020202, 0x03030503,
> + 0x06030202, 0x05030404, 0x07070607, 0x06070607, 0x090b0908,
> + 0x080a0808, 0x0d0a0706, 0x0c0b0a0a, 0x070c0d0c, 0x0e0f0e09,
> + 0x0c0b0f0c, 0xdbff0c0c, 0x03014300, 0x03040303, 0x04040804,
> + 0x0a0c1208, 0x1212120c, 0x12121212, 0x12121212, 0x12121212,
> + 0x12121212, 0x12121212, 0x12121212, 0x12121212, 0x12121212,
> + 0x12121212, 0x12121212, 0x12121212, 0xff121212 },
> + { 0x01020043, 0x01010101, 0x01010102, 0x02020202, 0x03030503,
> + 0x06030202, 0x05030404, 0x07070607, 0x06070607, 0x090b0908,
> + 0x080a0808, 0x0d0a0706, 0x0c0b0a0a, 0x070c0d0c, 0x0e0f0e09,
> + 0x0c0b0f0c, 0xdbff0c0c, 0x02014300, 0x03030202, 0x04040703,
> + 0x080a0f07, 0x0f0f0f0a, 0x0f0f0f0f, 0x0f0f0f0f, 0x0f0f0f0f,
> + 0x0f0f0f0f, 0x0f0f0f0f, 0x0f0f0f0f, 0x0f0f0f0f, 0x0f0f0f0f,
> + 0x0f0f0f0f, 0x0f0f0f0f, 0x0f0f0f0f, 0xff0f0f0f },
> + { 0x01010043, 0x01010101, 0x01010101, 0x01010101, 0x02020302,
> + 0x04020202, 0x03020303, 0x05050405, 0x05050405, 0x07080606,
> + 0x06080606, 0x0a070505, 0x09080807, 0x05090909, 0x0a0b0a07,
> + 0x09080b09, 0xdbff0909, 0x02014300, 0x02030202, 0x03030503,
> + 0x07080c05, 0x0c0c0c08, 0x0c0c0c0c, 0x0c0c0c0c, 0x0c0c0c0c,
> + 0x0c0c0c0c, 0x0c0c0c0c, 0x0c0c0c0c, 0x0c0c0c0c, 0x0c0c0c0c,
> + 0x0c0c0c0c, 0x0c0c0c0c, 0x0c0c0c0c, 0xff0c0c0c },
> + { 0x01010043, 0x01010101, 0x01010101, 0x01010101, 0x01010201,
> + 0x03010101, 0x02010202, 0x03030303, 0x03030303, 0x04050404,
> + 0x04050404, 0x06050303, 0x06050505, 0x03060606, 0x07070704,
> + 0x06050706, 0xdbff0606, 0x01014300, 0x01020101, 0x02020402,
> + 0x05060904, 0x09090906, 0x09090909, 0x09090909, 0x09090909,
> + 0x09090909, 0x09090909, 0x09090909, 0x09090909, 0x09090909,
> + 0x09090909, 0x09090909, 0x09090909, 0xff090909 },
> + { 0x01010043, 0x01010101, 0x01010101, 0x01010101, 0x01010101,
> + 0x01010101, 0x01010101, 0x01010101, 0x01010101, 0x02020202,
> + 0x02020202, 0x03020101, 0x03020202, 0x01030303, 0x03030302,
> + 0x03020303, 0xdbff0403, 0x01014300, 0x01010101, 0x01010201,
> + 0x03040602, 0x06060604, 0x06060606, 0x06060606, 0x06060606,
> + 0x06060606, 0x06060606, 0x06060606, 0x06060606, 0x06060606,
> + 0x06060606, 0x06060606, 0x06060606, 0xff060606 }
> +};
> +
> +static void aspeed_video_init_jpeg_table(u32 *table, bool yuv420)
> +{
> + int i;
> + unsigned int base;
> +
> + for (i = 0; i < ASPEED_VIDEO_JPEG_NUM_QUALITIES; i++) {
> + base = 256 * i; /* AST HW requires this header spacing */
> + memcpy(&table[base], aspeed_video_jpeg_header,
> + sizeof(aspeed_video_jpeg_header));
> +
> + base += ASPEED_VIDEO_JPEG_HEADER_SIZE;
> + memcpy(&table[base], aspeed_video_jpeg_dct[i],
> + sizeof(aspeed_video_jpeg_dct[i]));
> +
> + base += ASPEED_VIDEO_JPEG_DCT_SIZE;
> + memcpy(&table[base], aspeed_video_jpeg_quant,
> + sizeof(aspeed_video_jpeg_quant));
> +
> + if (yuv420)
> + table[base + 2] = 0x00220103;
> + }
> +}
> +
> +static void aspeed_video_update(struct aspeed_video *video, u32 reg, u32 clear,
> + u32 bits)
> +{
> + u32 t = readl(video->base + reg);
> + u32 before = t;
> +
> + t &= ~clear;
> + t |= bits;
> + writel(t, video->base + reg);
> + dev_dbg(video->dev, "update %03x[%08x -> %08x]\n", reg, before,
> + readl(video->base + reg));
> +}
> +
> +static u32 aspeed_video_read(struct aspeed_video *video, u32 reg)
> +{
> + u32 t = readl(video->base + reg);
> +
> + dev_dbg(video->dev, "read %03x[%08x]\n", reg, t);
> + return t;
> +}
> +
> +static void aspeed_video_write(struct aspeed_video *video, u32 reg, u32 val)
> +{
> + writel(val, video->base + reg);
> + dev_dbg(video->dev, "write %03x[%08x]\n", reg,
> + readl(video->base + reg));
> +}
> +
> +static bool aspeed_video_engine_busy(struct aspeed_video *video)
> +{
> + u32 seq_ctrl = aspeed_video_read(video, VE_SEQ_CTRL);
> +
> + if (!(seq_ctrl & VE_SEQ_CTRL_COMP_BUSY) ||
> + !(seq_ctrl & VE_SEQ_CTRL_CAP_BUSY)) {
> + dev_err(video->dev, "video engine busy\n");
> + return true;
> + }
> +
> + return false;
> +}
> +
> +static int aspeed_video_start_frame(struct aspeed_video *video)
> +{
> + dma_addr_t addr;
> + unsigned long flags;
> + struct aspeed_video_buffer *buf;
> +
> + if (aspeed_video_engine_busy(video))
> + return -EBUSY;
> +
> + spin_lock_irqsave(&video->lock, flags);
> + buf = list_first_entry_or_null(&video->buffers,
> + struct aspeed_video_buffer, link);
> + if (!buf) {
> + spin_unlock_irqrestore(&video->lock, flags);
> + return -EPROTO;
> + }
> +
> + set_bit(VIDEO_FRAME_INPRG, &video->flags);
> + addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
> + spin_unlock_irqrestore(&video->lock, flags);
> +
> + aspeed_video_write(video, VE_COMP_PROC_OFFSET, 0);
> + aspeed_video_write(video, VE_COMP_OFFSET, 0);
> + aspeed_video_write(video, VE_COMP_ADDR, addr);
> +
> + aspeed_video_update(video, VE_INTERRUPT_CTRL, 0,
> + VE_INTERRUPT_COMP_COMPLETE |
> + VE_INTERRUPT_CAPTURE_COMPLETE);
> +
> + aspeed_video_update(video, VE_SEQ_CTRL, 0,
> + VE_SEQ_CTRL_TRIG_CAPTURE | VE_SEQ_CTRL_TRIG_COMP);
> +
> + return 0;
> +}
> +
> +static void aspeed_video_start_mode_detect(struct aspeed_video *video)
> +{
> + /* Enable mode detect interrupts */
> + aspeed_video_update(video, VE_INTERRUPT_CTRL, 0,
> + VE_INTERRUPT_MODE_DETECT);
> +
> + /* Trigger mode detect */
> + aspeed_video_update(video, VE_SEQ_CTRL, 0, VE_SEQ_CTRL_TRIG_MODE_DET);
> +}
> +
> +static void aspeed_video_disable_mode_detect(struct aspeed_video *video)
Somewhat weird naming for this pair of functions: either use start/stop or
enable/disable (my preference), not start/disable.
> +{
> + /* Disable mode detect interrupts */
> + aspeed_video_update(video, VE_INTERRUPT_CTRL,
> + VE_INTERRUPT_MODE_DETECT, 0);
> +
> + /* Disable mode detect */
> + aspeed_video_update(video, VE_SEQ_CTRL, VE_SEQ_CTRL_TRIG_MODE_DET, 0);
> +}
> +
> +static void aspeed_video_off(struct aspeed_video *video)
> +{
> + /* Reset the engine */
> + reset_control_assert(video->rst);
> + udelay(100);
> + reset_control_deassert(video->rst);
> +
> + /* Turn off the relevant clocks */
> + clk_disable_unprepare(video->vclk);
> + clk_disable_unprepare(video->eclk);
> +}
> +
> +static void aspeed_video_on(struct aspeed_video *video)
> +{
> + /* Turn on the relevant clocks */
> + clk_prepare_enable(video->eclk);
> + clk_prepare_enable(video->vclk);
> +
> + /* Reset the engine */
> + reset_control_assert(video->rst);
> + udelay(100);
> + reset_control_deassert(video->rst);
> +}
> +
> +static void aspeed_video_bufs_done(struct aspeed_video *video,
> + enum vb2_buffer_state state)
> +{
> + unsigned long flags;
> + struct aspeed_video_buffer *buf;
> +
> + spin_lock_irqsave(&video->lock, flags);
> + list_for_each_entry(buf, &video->buffers, link) {
> + if (list_is_last(&buf->link, &video->buffers))
> + buf->vb.flags |= V4L2_BUF_FLAG_LAST;
You don't need to use this flag. It's meant for hardware codecs,
not for a regular video capture driver.
> + vb2_buffer_done(&buf->vb.vb2_buf, state);
> + }
> + INIT_LIST_HEAD(&video->buffers);
> + spin_unlock_irqrestore(&video->lock, flags);
> +}
> +
> +static irqreturn_t aspeed_video_irq(int irq, void *arg)
> +{
> + struct aspeed_video *video = arg;
> + u32 sts = aspeed_video_read(video, VE_INTERRUPT_STATUS);
> +
> + if (atomic_read(&video->clients) == 0) {
> + dev_info(video->dev, "irq with no client; disabling irqs\n");
> +
> + aspeed_video_write(video, VE_INTERRUPT_CTRL, 0);
> + aspeed_video_write(video, VE_INTERRUPT_STATUS, 0xffffffff);
> + return IRQ_HANDLED;
> + }
> +
> + /* Resolution changed; reset entire engine and reinitialize */
> + if (sts & VE_INTERRUPT_MODE_DETECT_WD) {
> + dev_info(video->dev, "resolution changed; resetting\n");
> + set_bit(VIDEO_RES_CHANGE, &video->flags);
> + clear_bit(VIDEO_FRAME_INPRG, &video->flags);
> + clear_bit(VIDEO_STREAMING, &video->flags);
> +
> + aspeed_video_off(video);
> + aspeed_video_bufs_done(video, VB2_BUF_STATE_ERROR);
> +
> + schedule_delayed_work(&video->res_work,
> + RESOLUTION_CHANGE_DELAY);
> + return IRQ_HANDLED;
> + }
> +
> + if (sts & VE_INTERRUPT_MODE_DETECT) {
> + aspeed_video_update(video, VE_INTERRUPT_CTRL,
> + VE_INTERRUPT_MODE_DETECT, 0);
> + aspeed_video_write(video, VE_INTERRUPT_STATUS,
> + VE_INTERRUPT_MODE_DETECT);
> +
> + set_bit(VIDEO_MODE_DETECT_DONE, &video->flags);
> + wake_up_interruptible_all(&video->wait);
> + }
> +
> + if ((sts & VE_INTERRUPT_COMP_COMPLETE) &&
> + (sts & VE_INTERRUPT_CAPTURE_COMPLETE)) {
> + struct aspeed_video_buffer *buf;
> + u32 frame_size = aspeed_video_read(video,
> + VE_OFFSET_COMP_STREAM);
> +
> + spin_lock(&video->lock);
> + clear_bit(VIDEO_FRAME_INPRG, &video->flags);
> + buf = list_first_entry_or_null(&video->buffers,
> + struct aspeed_video_buffer,
> + link);
> + if (buf) {
> + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, frame_size);
> +
> + if (!list_is_last(&buf->link, &video->buffers)) {
> + buf->vb.vb2_buf.timestamp = ktime_get_ns();
> + buf->vb.sequence = video->sequence++;
> + buf->vb.field = V4L2_FIELD_NONE;
> + vb2_buffer_done(&buf->vb.vb2_buf,
> + VB2_BUF_STATE_DONE);
> + list_del(&buf->link);
> + }
> + }
> + spin_unlock(&video->lock);
> +
> + aspeed_video_update(video, VE_SEQ_CTRL,
> + VE_SEQ_CTRL_TRIG_CAPTURE |
> + VE_SEQ_CTRL_FORCE_IDLE |
> + VE_SEQ_CTRL_TRIG_COMP, 0);
> + aspeed_video_update(video, VE_INTERRUPT_CTRL,
> + VE_INTERRUPT_COMP_COMPLETE |
> + VE_INTERRUPT_CAPTURE_COMPLETE, 0);
> + aspeed_video_write(video, VE_INTERRUPT_STATUS,
> + VE_INTERRUPT_COMP_COMPLETE |
> + VE_INTERRUPT_CAPTURE_COMPLETE);
> +
> + if (test_bit(VIDEO_STREAMING, &video->flags) && buf)
> + aspeed_video_start_frame(video);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void aspeed_video_check_polarity(struct aspeed_video *video)
This function should be moved to just before the get_resolution function,
since that's the one that calls this.
> +{
> + int i;
> + int hsync_counter = 0;
> + int vsync_counter = 0;
> + u32 sts;
> +
> + for (i = 0; i < NUM_POLARITY_CHECKS; ++i) {
> + sts = aspeed_video_read(video, VE_MODE_DETECT_STATUS);
> + if (sts & VE_MODE_DETECT_STATUS_VSYNC)
> + vsync_counter--;
> + else
> + vsync_counter++;
> +
> + if (sts & VE_MODE_DETECT_STATUS_HSYNC)
> + hsync_counter--;
> + else
> + hsync_counter++;
> + }
> +
> + if (hsync_counter < 0 || vsync_counter < 0) {
> + u32 ctrl;
> +
> + if (hsync_counter < 0)
> + ctrl = VE_CTRL_HSYNC_POL;
> + else
> + video->timings.polarities |= V4L2_DV_HSYNC_POS_POL;
You should set this for video->detected_timings.
You also don't clear the polarities flag if the polarity is negative.
> +
> + if (vsync_counter < 0)
> + ctrl = VE_CTRL_VSYNC_POL;
> + else
> + video->timings.polarities |= V4L2_DV_VSYNC_POS_POL;
> +
> + aspeed_video_update(video, VE_CTRL, 0, ctrl);
It would make more sense to write to this register either when you
start streaming or when s_dv_timings is called. That's when you need it,
not when detecting a new timing.
> + }
> +}
> +
> +static bool aspeed_video_alloc_buf(struct aspeed_video *video,
> + struct aspeed_video_addr *addr,
> + unsigned int size)
> +{
> + addr->virt = dma_alloc_coherent(video->dev, size, &addr->dma,
> + GFP_KERNEL);
> + if (!addr->virt)
> + return false;
> +
> + addr->size = size;
> + return true;
> +}
> +
> +static void aspeed_video_free_buf(struct aspeed_video *video,
> + struct aspeed_video_addr *addr)
> +{
> + dma_free_coherent(video->dev, addr->size, addr->virt, addr->dma);
> + addr->size = 0;
> + addr->dma = 0ULL;
> + addr->virt = NULL;
> +}
> +
> +/*
> + * Get the minimum HW-supported compression buffer size for the frame size.
> + * Assume worst-case JPEG compression size is 1/8 raw size. This should be
> + * plenty even for maximum quality; any worse and the engine will simply return
> + * incomplete JPEGs.
> + */
> +static void aspeed_video_calc_compressed_size(struct aspeed_video *video)
> +{
> + int i, j;
> + u32 compression_buffer_size_reg = 0;
> + unsigned int size;
> + const unsigned int num_compression_packets = 4;
> + const unsigned int compression_packet_size = 1024;
> + const unsigned int max_compressed_size =
> + video->capture_width * video->capture_height / 2;
> +
> + video->max_compressed_size = UINT_MAX;
> +
> + for (i = 0; i < 6; ++i) {
> + for (j = 0; j < 8; ++j) {
> + size = (num_compression_packets << i) *
> + (compression_packet_size << j);
> + if (size < max_compressed_size)
> + continue;
> +
> + if (size < video->max_compressed_size) {
> + compression_buffer_size_reg = (i << 3) | j;
> + video->max_compressed_size = size;
> + }
> + }
> + }
> +
> + aspeed_video_write(video, VE_STREAM_BUF_SIZE,
> + compression_buffer_size_reg);
> +
> + dev_dbg(video->dev, "max compressed size: %x\n",
> + video->max_compressed_size);
> +}
> +
> +#define res_check(v) test_and_clear_bit(VIDEO_MODE_DETECT_DONE, &(v)->flags)
> +
> +static int aspeed_video_get_resolution(struct aspeed_video *video)
> +{
> + bool invalid_resolution = true;
> + int rc;
> + int tries = 0;
> + unsigned int bottom;
> + unsigned int left;
> + unsigned int right;
> + unsigned int top;
> + u32 mds;
> + u32 src_lr_edge;
> + u32 src_tb_edge;
> + u32 sync;
> +
If I understand the code correctly, when this is called we're not supposed to
be streaming video, right?
> + if (video->srcs[1].size)
> + aspeed_video_free_buf(video, &video->srcs[1]);
> +
> + if (!video->detect.size) {
> + if (video->srcs[0].size >= VE_MAX_SRC_BUFFER_SIZE) {
> + video->detect = video->srcs[0];
> +
> + video->srcs[0].size = 0;
> + video->srcs[0].dma = 0ULL;
> + video->srcs[0].virt = NULL;
> + } else {
> + if (video->srcs[0].size)
> + aspeed_video_free_buf(video, &video->srcs[0]);
> +
> + if (!aspeed_video_alloc_buf(video, &video->detect,
> + VE_MAX_SRC_BUFFER_SIZE)) {
> + dev_err(video->dev,
> + "failed to allocate source buffers\n");
> + return -ENOMEM;
> + }
> + }
> + }
> +
> + aspeed_video_write(video, VE_SRC0_ADDR, video->detect.dma);
> +
> + video->timings.width = 0;
> + video->timings.height = 0;
detected_timings
> +
> + do {
> + if (tries) {
> + set_current_state(TASK_INTERRUPTIBLE);
> + if (schedule_timeout(INVALID_RESOLUTION_DELAY))
> + return -EINTR;
> + }
> +
> + aspeed_video_start_mode_detect(video);
> +
> + rc = wait_event_interruptible_timeout(video->wait,
> + res_check(video),
> + MODE_DETECT_TIMEOUT);
> + if (!rc) {
> + dev_err(video->dev, "timed out on 1st mode detect\n");
> + aspeed_video_disable_mode_detect(video);
> + return -ETIMEDOUT;
> + }
> +
> + /* Disable mode detect in order to re-trigger */
> + aspeed_video_update(video, VE_SEQ_CTRL,
> + VE_SEQ_CTRL_TRIG_MODE_DET, 0);
> +
> + aspeed_video_check_polarity(video);
> +
> + aspeed_video_start_mode_detect(video);
Just curious: why is check_polarity done before starting the mode_detect?
I would expect it to be the other way around.
As mentioned above, aspeed_video_check_polarity doesn't just check the polarity,
it also seems to set it. If this is required before you can do a mode detect,
then that should be documented and the function should be renamed to
check_and_set_polarity.
> +
> + rc = wait_event_interruptible_timeout(video->wait,
> + res_check(video),
> + MODE_DETECT_TIMEOUT);
> + if (!rc) {
> + dev_err(video->dev, "timed out on 2nd mode detect\n");
> + aspeed_video_disable_mode_detect(video);
> + return -ETIMEDOUT;
> + }
> +
> + src_lr_edge = aspeed_video_read(video, VE_SRC_LR_EDGE_DET);
> + src_tb_edge = aspeed_video_read(video, VE_SRC_TB_EDGE_DET);
> + mds = aspeed_video_read(video, VE_MODE_DETECT_STATUS);
> + sync = aspeed_video_read(video, VE_SYNC_STATUS);
> +
> + bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >>
> + VE_SRC_TB_EDGE_DET_BOT_SHF;
> + top = src_tb_edge & VE_SRC_TB_EDGE_DET_TOP;
> + video->timings.vfrontporch = top;
> + video->timings.vbackporch = ((mds & VE_MODE_DETECT_V_LINES) >>
> + VE_MODE_DETECT_V_LINES_SHF) - bottom;
> + video->timings.vsync = (sync & VE_SYNC_STATUS_VSYNC) >>
> + VE_SYNC_STATUS_VSYNC_SHF;
> + if (top > bottom)
> + continue;
> +
> + right = (src_lr_edge & VE_SRC_LR_EDGE_DET_RT) >>
> + VE_SRC_LR_EDGE_DET_RT_SHF;
> + left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT;
> + video->timings.hfrontporch = left;
> + video->timings.hbackporch = (mds & VE_MODE_DETECT_H_PIXELS) -
> + right;
> + video->timings.hsync = sync & VE_SYNC_STATUS_HSYNC;
> + if (left > right)
> + continue;
> +
> + invalid_resolution = false;
> + } while (invalid_resolution && (tries++ < INVALID_RESOLUTION_RETRIES));
> +
> + if (invalid_resolution) {
> + dev_err(video->dev, "invalid resolution detected\n");
> + return -ERANGE;
> + }
> +
> + video->timings.height = (bottom - top) + 1;
> + video->timings.width = (right - left) + 1;
> +
> + /* Don't use direct mode below 1024 x 768 (irqs don't fire) */
> + if (video->timings.width * video->timings.height < DIRECT_FETCH_THRESHOLD) {
> + aspeed_video_write(video, VE_TGS_0,
> + FIELD_PREP(VE_TGS_FIRST, left - 1) |
> + FIELD_PREP(VE_TGS_LAST, right));
> + aspeed_video_write(video, VE_TGS_1,
> + FIELD_PREP(VE_TGS_FIRST, top) |
> + FIELD_PREP(VE_TGS_LAST, bottom + 1));
> + aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_INT_DE);
> + } else {
> + aspeed_video_update(video, VE_CTRL, 0, VE_CTRL_DIRECT_FETCH);
> + }
Shouldn't this be done in set_capture_resolution?
> +
> + aspeed_video_update(video, VE_INTERRUPT_CTRL, 0,
> + VE_INTERRUPT_MODE_DETECT_WD);
> + aspeed_video_update(video, VE_SEQ_CTRL, 0,
> + VE_SEQ_CTRL_AUTO_COMP | VE_SEQ_CTRL_EN_WATCHDOG);
What do these two lines do? Perhaps a comment would help.
> +
> + dev_dbg(video->dev, "got resolution[%dx%d]\n", video->timings.width,
> + video->timings.height);
> +
> + return 0;
> +
> +}
> +
> +static int aspeed_video_set_capture_resolution(struct aspeed_video *video)
> +{
> + unsigned int size = video->timings.width * video->timings.height;
active_timings
> + struct aspeed_video_addr detect = video->detect;
> +
> + video->detect.size = 0;
> + video->detect.dma = 0ULL;
> + video->detect.virt = NULL;
> +
> + video->capture_width = video->timings.width;
> + video->capture_height = video->timings.height;
> +
> + aspeed_video_write(video, VE_CAP_WINDOW,
> + video->capture_width << 16 | video->capture_height);
> + aspeed_video_write(video, VE_COMP_WINDOW,
> + video->capture_width << 16 | video->capture_height);
> + aspeed_video_write(video, VE_SRC_SCANLINE_OFFSET,
> + video->capture_width * 4);
> +
> + size *= 4;
> + if (size == detect.size / 2) {
> + aspeed_video_write(video, VE_SRC1_ADDR, detect.dma + size);
> + video->srcs[0] = detect;
> + } else if (size == detect.size) {
> + video->srcs[0] = detect;
> +
> + if (!aspeed_video_alloc_buf(video, &video->srcs[1], size))
> + goto err_mem;
> +
> + aspeed_video_write(video, VE_SRC1_ADDR, video->srcs[1].dma);
> + } else {
> + aspeed_video_free_buf(video, &detect);
> +
> + if (!aspeed_video_alloc_buf(video, &video->srcs[0], size))
> + goto err_mem;
> +
> + if (!aspeed_video_alloc_buf(video, &video->srcs[1], size))
> + goto err_mem;
> +
> + aspeed_video_write(video, VE_SRC0_ADDR, video->srcs[0].dma);
> + aspeed_video_write(video, VE_SRC1_ADDR, video->srcs[1].dma);
> + }
> +
> + aspeed_video_calc_compressed_size(video);
> +
> + dev_dbg(video->dev, "set resolution[%dx%d]\n", video->capture_width,
> + video->capture_height);
> +
> + return 0;
> +
> +err_mem:
> + dev_err(video->dev, "failed to allocate source buffers\n");
> +
> + if (video->srcs[0].size)
> + aspeed_video_free_buf(video, &video->srcs[0]);
> +
> + return -ENOMEM;
> +}
> +
> +static void aspeed_video_init_regs(struct aspeed_video *video)
> +{
> + u32 comp_ctrl = VE_COMP_CTRL_RSVD |
> + FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
> + FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10);
> + u32 ctrl = VE_CTRL_AUTO_OR_CURSOR;
> + u32 seq_ctrl = VE_SEQ_CTRL_JPEG_MODE;
> +
> + if (video->frame_rate)
> + ctrl |= FIELD_PREP(VE_CTRL_FRC, video->frame_rate);
> +
> + if (video->yuv420)
> + seq_ctrl |= VE_SEQ_CTRL_YUV420;
> +
> + /* Unlock VE registers */
> + aspeed_video_write(video, VE_PROTECTION_KEY, VE_PROTECTION_KEY_UNLOCK);
> +
> + /* Disable interrupts */
> + aspeed_video_write(video, VE_INTERRUPT_CTRL, 0);
> + aspeed_video_write(video, VE_INTERRUPT_STATUS, 0xffffffff);
> +
> + /* Clear the offset */
> + aspeed_video_write(video, VE_COMP_PROC_OFFSET, 0);
> + aspeed_video_write(video, VE_COMP_OFFSET, 0);
> +
> + aspeed_video_write(video, VE_JPEG_ADDR, video->jpeg.dma);
> +
> + /* Set control registers */
> + aspeed_video_write(video, VE_SEQ_CTRL, seq_ctrl);
> + aspeed_video_write(video, VE_CTRL, ctrl);
> + aspeed_video_write(video, VE_COMP_CTRL, comp_ctrl);
> +
> + /* Don't downscale */
> + aspeed_video_write(video, VE_SCALING_FACTOR, 0x10001000);
> + aspeed_video_write(video, VE_SCALING_FILTER0, 0x00200000);
> + aspeed_video_write(video, VE_SCALING_FILTER1, 0x00200000);
> + aspeed_video_write(video, VE_SCALING_FILTER2, 0x00200000);
> + aspeed_video_write(video, VE_SCALING_FILTER3, 0x00200000);
> +
> + /* Set mode detection defaults */
> + aspeed_video_write(video, VE_MODE_DETECT, 0x22666500);
> +}
> +
> +static int aspeed_video_start(struct aspeed_video *video)
> +{
> + int rc;
> +
> + aspeed_video_on(video);
> +
> + aspeed_video_init_regs(video);
> +
> + rc = aspeed_video_get_resolution(video);
No, this shouldn't be called here. Only query_dv_timings should call this.
> + if (rc)
> + return rc;
> +
> + rc = aspeed_video_set_capture_resolution(video);
> + if (rc)
> + return rc;
> +
> + video->pix_fmt.width = video->timings.width;
> + video->pix_fmt.height = video->timings.height;
> + video->pix_fmt.sizeimage = video->max_compressed_size;
You don't set that here: otherwise opening the device node would magically
change the format. That's not what should happen.
The golden rule is that you never change timings and/or format unless
explicitly commanded by the application through S_DV_TIMINGS and S_FMT.
> +
> + return 0;
> +}
> +
> +static void aspeed_video_stop(struct aspeed_video *video)
> +{
> + cancel_delayed_work_sync(&video->res_work);
> +
> + aspeed_video_off(video);
> +
> + if (video->srcs[0].size)
> + aspeed_video_free_buf(video, &video->srcs[0]);
> +
> + if (video->srcs[1].size)
> + aspeed_video_free_buf(video, &video->srcs[1]);
> +
> + if (video->detect.size)
> + aspeed_video_free_buf(video, &video->detect);
> +
> + video->flags = 0;
> +}
> +
> +static int aspeed_video_querycap(struct file *file, void *fh,
> + struct v4l2_capability *cap)
> +{
> + strscpy(cap->driver, DEVICE_NAME, sizeof(cap->driver));
> + strscpy(cap->card, "Aspeed Video Engine", sizeof(cap->card));
> + snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
> + DEVICE_NAME);
> +
> + return 0;
> +}
> +
> +static int aspeed_video_enum_format(struct file *file, void *fh,
> + struct v4l2_fmtdesc *f)
> +{
> + if (f->index)
> + return -EINVAL;
> +
> + f->pixelformat = V4L2_PIX_FMT_JPEG;
> +
> + return 0;
> +}
> +
> +static int aspeed_video_get_format(struct file *file, void *fh,
> + struct v4l2_format *f)
> +{
> + struct aspeed_video *video = video_drvdata(file);
> +
> + f->fmt.pix = video->pix_fmt;
> +
> + return 0;
> +}
> +
> +static int aspeed_video_enum_input(struct file *file, void *fh,
> + struct v4l2_input *inp)
> +{
> + if (inp->index)
> + return -EINVAL;
> +
> + strscpy(inp->name, "Host VGA capture", sizeof(inp->name));
> + inp->type = V4L2_INPUT_TYPE_CAMERA;
> + inp->capabilities = V4L2_IN_CAP_DV_TIMINGS;
> + inp->status = 0;
> +
> + return 0;
> +}
> +
> +static int aspeed_video_get_input(struct file *file, void *fh, unsigned int *i)
> +{
> + *i = 0;
> +
> + return 0;
> +}
> +
> +static int aspeed_video_set_input(struct file *file, void *fh, unsigned int i)
> +{
> + if (i)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int aspeed_video_get_parm(struct file *file, void *fh,
> + struct v4l2_streamparm *a)
> +{
> + struct aspeed_video *video = video_drvdata(file);
> +
> + a->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
> + a->parm.capture.readbuffers = 3;
> + a->parm.capture.timeperframe.numerator = 1;
> + if (!video->frame_rate)
> + a->parm.capture.timeperframe.denominator = MAX_FRAME_RATE;
> + else
> + a->parm.capture.timeperframe.denominator = video->frame_rate;
> +
> + return 0;
> +}
> +
> +static int aspeed_video_set_parm(struct file *file, void *fh,
> + struct v4l2_streamparm *a)
> +{
> + unsigned int frame_rate = 0;
> + struct aspeed_video *video = video_drvdata(file);
> +
> + a->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
> + a->parm.capture.readbuffers = 3;
> +
> + if (a->parm.capture.timeperframe.numerator)
> + frame_rate = a->parm.capture.timeperframe.denominator /
> + a->parm.capture.timeperframe.numerator;
> +
> + if (!frame_rate || frame_rate > MAX_FRAME_RATE) {
> + frame_rate = 0;
> + a->parm.capture.timeperframe.denominator = MAX_FRAME_RATE;
> + a->parm.capture.timeperframe.numerator = 1;
> + }
> +
> + if (video->frame_rate != frame_rate) {
> + video->frame_rate = frame_rate;
> + aspeed_video_update(video, VE_CTRL, VE_CTRL_FRC,
> + FIELD_PREP(VE_CTRL_FRC, frame_rate));
> + }
> +
> + return 0;
> +}
> +
> +static int aspeed_video_enum_framesizes(struct file *file, void *fh,
> + struct v4l2_frmsizeenum *fsize)
> +{
> + struct aspeed_video *video = video_drvdata(file);
> +
> + if (fsize->index)
> + return -EINVAL;
> +
> + if (fsize->pixel_format != V4L2_PIX_FMT_JPEG)
> + return -EINVAL;
> +
> + fsize->discrete.width = video->pix_fmt.width;
> + fsize->discrete.height = video->pix_fmt.height;
> + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
> +
> + return 0;
> +}
> +
> +static int aspeed_video_enum_frameintervals(struct file *file, void *fh,
> + struct v4l2_frmivalenum *fival)
> +{
> + struct aspeed_video *video = video_drvdata(file);
> +
> + if (fival->index)
> + return -EINVAL;
> +
> + if (fival->width != video->timings.width ||
> + fival->height != video->timings.height)
> + return -EINVAL;
> +
> + if (fival->pixel_format != V4L2_PIX_FMT_JPEG)
> + return -EINVAL;
> +
> + fival->type = V4L2_FRMIVAL_TYPE_CONTINUOUS;
> +
> + fival->stepwise.min.denominator = MAX_FRAME_RATE;
> + fival->stepwise.min.numerator = 1;
> + fival->stepwise.max.denominator = 1;
> + fival->stepwise.max.numerator = 1;
> + fival->stepwise.step = fival->stepwise.max;
> +
> + return 0;
> +}
> +
> +static int aspeed_video_set_dv_timings(struct file *file, void *fh,
> + struct v4l2_dv_timings *timings)
> +{
> + int rc;
> + struct aspeed_video *video = video_drvdata(file);
> +
> + if (video->capture_width == timings->bt.width &&
> + video->capture_height == timings->bt.height)
Unless I am mistaken, capture_width/height just duplicates
video->pix_fmt.width/height. I'd drop capture_width/height and only
use pix_fmt.
> + return 0;
> +
> + if (vb2_is_busy(&video->queue))
> + return -EBUSY;
> +
> + if (video->timings.width != timings->bt.width ||
> + video->timings.height != timings->bt.height)
> + return -EINVAL;
This 'if' makes no sense. It is perfectly fine (if silly) to set
timings that do not match the current resolution. The timings can
change at any time anyway, so there is no point to check this.
> +
> + rc = aspeed_video_set_capture_resolution(video);
> + if (rc)
> + return rc;
> +
> + video->pix_fmt.width = timings->bt.width;
> + video->pix_fmt.height = timings->bt.height;
> + video->pix_fmt.sizeimage = video->max_compressed_size;
> +
> + timings->type = V4L2_DV_BT_656_1120;
> +
> + return 0;
> +}
> +
> +static int aspeed_video_get_dv_timings(struct file *file, void *fh,
> + struct v4l2_dv_timings *timings)
> +{
> + struct aspeed_video *video = video_drvdata(file);
> +
> + timings->type = V4L2_DV_BT_656_1120;
> + timings->bt = video->timings;
Should return active_timings.
> +
> + return 0;
> +}
> +
> +static int aspeed_video_query_dv_timings(struct file *file, void *fh,
> + struct v4l2_dv_timings *timings)
> +{
> + int rc;
> + struct aspeed_video *video = video_drvdata(file);
> +
> + if (file->f_flags & O_NONBLOCK) {
> + if (test_bit(VIDEO_RES_CHANGE, &video->flags))
> + return -EAGAIN;
> + } else {
> + rc = wait_event_interruptible(video->wait,
> + !test_bit(VIDEO_RES_CHANGE,
> + &video->flags));
> + if (rc)
> + return -EINTR;
> + }
> +
> + timings->type = V4L2_DV_BT_656_1120;
> + timings->bt = video->timings;
> + timings->bt.width = video->timings.width;
> + timings->bt.height = video->timings.height;
Should return the detected_timings.
Why assign bt.width/height again? Those two lines can be dropped.
> +
> + return 0;
> +}
> +
> +static int aspeed_video_enum_dv_timings(struct file *file, void *fh,
> + struct v4l2_enum_dv_timings *timings)
> +{
> + if (timings->index)
> + return -EINVAL;
> +
> + return aspeed_video_get_dv_timings(file, fh, &timings->timings);
> +}
> +
> +static int aspeed_video_dv_timings_cap(struct file *file, void *fh,
> + struct v4l2_dv_timings_cap *cap)
> +{
> + cap->type = V4L2_DV_BT_656_1120;
> + cap->bt.capabilities = V4L2_DV_BT_CAP_PROGRESSIVE;
> + cap->bt.min_width = MIN_WIDTH;
> + cap->bt.max_width = MAX_WIDTH;
> + cap->bt.min_height = MIN_HEIGHT;
> + cap->bt.max_height = MAX_HEIGHT;
I would create a static const struct v4l2_dv_timings_cap at the top of the source
and return that here.
You can then use the helpers v4l2_valid_dv_timings in s_dv_timings and
v4l2_enum_dv_timings_cap in enum_dv_timings.
You need to set the V4L2_DV_BT_CAP_REDUCED_BLANKING capability as well.
And fill in cap->bt.min/max_pixelclock and standards (CEA861|DMT|CVT|GTF).
> +
> + return 0;
> +}
> +
> +static int aspeed_video_sub_event(struct v4l2_fh *fh,
> + const struct v4l2_event_subscription *sub)
> +{
> + switch (sub->type) {
> + case V4L2_EVENT_SOURCE_CHANGE:
> + return v4l2_src_change_event_subscribe(fh, sub);
> + }
> +
> + return v4l2_ctrl_subscribe_event(fh, sub);
> +}
> +
> +static const struct v4l2_ioctl_ops aspeed_video_ioctl_ops = {
> + .vidioc_querycap = aspeed_video_querycap,
> +
> + .vidioc_enum_fmt_vid_cap = aspeed_video_enum_format,
> + .vidioc_g_fmt_vid_cap = aspeed_video_get_format,
> + .vidioc_s_fmt_vid_cap = aspeed_video_get_format,
> + .vidioc_try_fmt_vid_cap = aspeed_video_get_format,
> +
> + .vidioc_reqbufs = vb2_ioctl_reqbufs,
> + .vidioc_querybuf = vb2_ioctl_querybuf,
> + .vidioc_qbuf = vb2_ioctl_qbuf,
> + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> + .vidioc_create_bufs = vb2_ioctl_create_bufs,
> + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
> + .vidioc_streamon = vb2_ioctl_streamon,
> + .vidioc_streamoff = vb2_ioctl_streamoff,
> +
> + .vidioc_enum_input = aspeed_video_enum_input,
> + .vidioc_g_input = aspeed_video_get_input,
> + .vidioc_s_input = aspeed_video_set_input,
> +
> + .vidioc_g_parm = aspeed_video_get_parm,
> + .vidioc_s_parm = aspeed_video_set_parm,
> + .vidioc_enum_framesizes = aspeed_video_enum_framesizes,
> + .vidioc_enum_frameintervals = aspeed_video_enum_frameintervals,
> +
> + .vidioc_s_dv_timings = aspeed_video_set_dv_timings,
> + .vidioc_g_dv_timings = aspeed_video_get_dv_timings,
> + .vidioc_query_dv_timings = aspeed_video_query_dv_timings,
> + .vidioc_enum_dv_timings = aspeed_video_enum_dv_timings,
> + .vidioc_dv_timings_cap = aspeed_video_dv_timings_cap,
> +
> + .vidioc_subscribe_event = aspeed_video_sub_event,
> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> +};
> +
> +static void aspeed_video_update_jpeg_quality(struct aspeed_video *video)
> +{
> + u32 comp_ctrl = FIELD_PREP(VE_COMP_CTRL_DCT_LUM, video->jpeg_quality) |
> + FIELD_PREP(VE_COMP_CTRL_DCT_CHR, video->jpeg_quality | 0x10);
> +
> + aspeed_video_update(video, VE_COMP_CTRL,
> + VE_COMP_CTRL_DCT_LUM | VE_COMP_CTRL_DCT_CHR,
> + comp_ctrl);
> +}
> +
> +static void aspeed_video_update_subsampling(struct aspeed_video *video)
> +{
> + if (video->jpeg.virt)
> + aspeed_video_init_jpeg_table(video->jpeg.virt, video->yuv420);
> +
> + if (video->yuv420)
> + aspeed_video_update(video, VE_SEQ_CTRL, 0, VE_SEQ_CTRL_YUV420);
> + else
> + aspeed_video_update(video, VE_SEQ_CTRL, VE_SEQ_CTRL_YUV420, 0);
> +}
> +
> +static int aspeed_video_set_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct aspeed_video *video = container_of(ctrl->handler,
> + struct aspeed_video,
> + ctrl_handler);
> +
> + switch (ctrl->id) {
> + case V4L2_CID_JPEG_COMPRESSION_QUALITY:
> + video->jpeg_quality = ctrl->val;
> + aspeed_video_update_jpeg_quality(video);
> + break;
> + case V4L2_CID_JPEG_CHROMA_SUBSAMPLING:
> + if (ctrl->val == V4L2_JPEG_CHROMA_SUBSAMPLING_420) {
> + video->yuv420 = true;
> + aspeed_video_update_subsampling(video);
> + } else {
> + video->yuv420 = false;
> + aspeed_video_update_subsampling(video);
> + }
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static const struct v4l2_ctrl_ops aspeed_video_ctrl_ops = {
> + .s_ctrl = aspeed_video_set_ctrl,
> +};
> +
> +static void aspeed_video_resolution_work(struct work_struct *work)
> +{
> + int rc;
> + struct delayed_work *dwork = to_delayed_work(work);
> + struct aspeed_video *video = container_of(dwork, struct aspeed_video,
> + res_work);
> +
> + /* No clients remaining after delay */
> + if (atomic_read(&video->clients) == 0)
> + goto done;
> +
> + aspeed_video_on(video);
> +
> + aspeed_video_init_regs(video);
> +
> + rc = aspeed_video_get_resolution(video);
> + if (rc)
> + dev_err(video->dev,
> + "resolution changed; couldn't get new resolution\n");
> +
> + if (video->timings.width != video->pix_fmt.width ||
> + video->timings.height != video->pix_fmt.height) {
> + static const struct v4l2_event ev = {
> + .type = V4L2_EVENT_SOURCE_CHANGE,
> + .u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
> + };
> +
> + v4l2_event_queue(&video->vdev, &ev);
> + }
> +
> +done:
> + clear_bit(VIDEO_RES_CHANGE, &video->flags);
> + wake_up_interruptible_all(&video->wait);
> +}
> +
> +static int aspeed_video_open(struct file *file)
> +{
> + int rc;
> + struct aspeed_video *video = video_drvdata(file);
> +
> + mutex_lock(&video->video_lock);
> +
> + if (atomic_inc_return(&video->clients) == 1) {
No need for a clients refcount. You can use the v4l2_fh_is_singular(_file) helpers.
See how other drivers do this.
> + rc = aspeed_video_start(video);
> + if (rc) {
> + dev_err(video->dev, "Failed to start video engine\n");
> + atomic_dec(&video->clients);
> + mutex_unlock(&video->video_lock);
> + return rc;
> + }
> + }
> +
> + mutex_unlock(&video->video_lock);
> +
> + return v4l2_fh_open(file);
> +}
> +
> +static int aspeed_video_release(struct file *file)
> +{
> + int rc;
> + struct aspeed_video *video = video_drvdata(file);
> +
> + rc = vb2_fop_release(file);
> +
> + mutex_lock(&video->video_lock);
> +
> + if (atomic_dec_return(&video->clients) == 0)
> + aspeed_video_stop(video);
> +
> + mutex_unlock(&video->video_lock);
> +
> + return rc;
> +}
> +
> +static const struct v4l2_file_operations aspeed_video_v4l2_fops = {
> + .owner = THIS_MODULE,
> + .read = vb2_fop_read,
> + .poll = vb2_fop_poll,
> + .unlocked_ioctl = video_ioctl2,
> + .mmap = vb2_fop_mmap,
> + .open = aspeed_video_open,
> + .release = aspeed_video_release,
> +};
> +
> +static int aspeed_video_queue_setup(struct vb2_queue *q,
> + unsigned int *num_buffers,
> + unsigned int *num_planes,
> + unsigned int sizes[],
> + struct device *alloc_devs[])
> +{
> + struct aspeed_video *video = vb2_get_drv_priv(q);
> +
> + if (*num_planes) {
> + if (sizes[0] < video->max_compressed_size)
> + return -EINVAL;
> +
> + return 0;
> + }
> +
> + *num_planes = 1;
> + sizes[0] = video->max_compressed_size;
> +
> + return 0;
> +}
> +
> +static int aspeed_video_buf_prepare(struct vb2_buffer *vb)
> +{
> + struct aspeed_video *video = vb2_get_drv_priv(vb->vb2_queue);
> +
> + if (vb2_plane_size(vb, 0) < video->max_compressed_size)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int aspeed_video_start_streaming(struct vb2_queue *q,
> + unsigned int count)
> +{
> + int rc;
> + struct aspeed_video *video = vb2_get_drv_priv(q);
> +
> + rc = aspeed_video_start_frame(video);
> + if (rc) {
> + aspeed_video_bufs_done(video, VB2_BUF_STATE_QUEUED);
> + return rc;
> + }
> +
> + video->sequence = 0;
> + set_bit(VIDEO_STREAMING, &video->flags);
> + return 0;
> +}
> +
> +static void aspeed_video_stop_streaming(struct vb2_queue *q)
> +{
> + int rc;
> + struct aspeed_video *video = vb2_get_drv_priv(q);
> +
> + clear_bit(VIDEO_STREAMING, &video->flags);
> +
> + rc = wait_event_timeout(video->wait,
> + !test_bit(VIDEO_FRAME_INPRG, &video->flags),
> + STOP_TIMEOUT);
> + if (!rc) {
> + dev_err(video->dev, "Timed out when stopping streaming\n");
> + aspeed_video_stop(video);
> + }
> +
> + aspeed_video_bufs_done(video, VB2_BUF_STATE_ERROR);
> +}
> +
> +static void aspeed_video_buf_queue(struct vb2_buffer *vb)
> +{
> + struct aspeed_video *video = vb2_get_drv_priv(vb->vb2_queue);
> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> + struct aspeed_video_buffer *avb = to_aspeed_video_buffer(vbuf);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&video->lock, flags);
> + list_add_tail(&avb->link, &video->buffers);
> + spin_unlock_irqrestore(&video->lock, flags);
> +}
> +
> +static const struct vb2_ops aspeed_video_vb2_ops = {
> + .queue_setup = aspeed_video_queue_setup,
> + .wait_prepare = vb2_ops_wait_prepare,
> + .wait_finish = vb2_ops_wait_finish,
> + .buf_prepare = aspeed_video_buf_prepare,
> + .start_streaming = aspeed_video_start_streaming,
> + .stop_streaming = aspeed_video_stop_streaming,
> + .buf_queue = aspeed_video_buf_queue,
> +};
> +
> +static int aspeed_video_setup_video(struct aspeed_video *video)
> +{
> + const u64 mask = ~(BIT(V4L2_JPEG_CHROMA_SUBSAMPLING_444) |
> + BIT(V4L2_JPEG_CHROMA_SUBSAMPLING_420));
> + struct v4l2_device *v4l2_dev = &video->v4l2_dev;
> + struct vb2_queue *vbq = &video->queue;
> + struct video_device *vdev = &video->vdev;
> + int rc;
> +
> + video->pix_fmt.pixelformat = V4L2_PIX_FMT_JPEG;
> + video->pix_fmt.field = V4L2_FIELD_NONE;
> + video->pix_fmt.colorspace = V4L2_COLORSPACE_SRGB;
> + video->pix_fmt.quantization = V4L2_QUANTIZATION_FULL_RANGE;
> +
> + rc = v4l2_device_register(video->dev, v4l2_dev);
> + if (rc) {
> + dev_err(video->dev, "Failed to register v4l2 device\n");
> + return rc;
> + }
> +
> + v4l2_ctrl_handler_init(&video->ctrl_handler, 2);
> + v4l2_ctrl_new_std(&video->ctrl_handler, &aspeed_video_ctrl_ops,
> + V4L2_CID_JPEG_COMPRESSION_QUALITY, 0,
> + ASPEED_VIDEO_JPEG_NUM_QUALITIES - 1, 1, 0);
> + v4l2_ctrl_new_std_menu(&video->ctrl_handler, &aspeed_video_ctrl_ops,
> + V4L2_CID_JPEG_CHROMA_SUBSAMPLING,
> + V4L2_JPEG_CHROMA_SUBSAMPLING_420, mask,
> + V4L2_JPEG_CHROMA_SUBSAMPLING_444);
> +
> + if (video->ctrl_handler.error) {
> + v4l2_ctrl_handler_free(&video->ctrl_handler);
> + v4l2_device_unregister(v4l2_dev);
> +
> + dev_err(video->dev, "Failed to init controls: %d\n",
> + video->ctrl_handler.error);
> + return rc;
> + }
> +
> + v4l2_dev->ctrl_handler = &video->ctrl_handler;
> +
> + vbq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> + vbq->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF;
> + vbq->dev = v4l2_dev->dev;
> + vbq->lock = &video->video_lock;
> + vbq->ops = &aspeed_video_vb2_ops;
> + vbq->mem_ops = &vb2_dma_contig_memops;
> + vbq->drv_priv = video;
> + vbq->buf_struct_size = sizeof(struct aspeed_video_buffer);
> + vbq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> + vbq->min_buffers_needed = 3;
> +
> + rc = vb2_queue_init(vbq);
> + if (rc) {
> + v4l2_ctrl_handler_free(&video->ctrl_handler);
> + v4l2_device_unregister(v4l2_dev);
> +
> + dev_err(video->dev, "Failed to init vb2 queue\n");
> + return rc;
> + }
> +
> + vdev->queue = vbq;
> + vdev->fops = &aspeed_video_v4l2_fops;
> + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
> + V4L2_CAP_STREAMING;
> + vdev->v4l2_dev = v4l2_dev;
> + strscpy(vdev->name, DEVICE_NAME, sizeof(vdev->name));
> + vdev->vfl_type = VFL_TYPE_GRABBER;
> + vdev->vfl_dir = VFL_DIR_RX;
> + vdev->release = video_device_release_empty;
> + vdev->ioctl_ops = &aspeed_video_ioctl_ops;
> + vdev->lock = &video->video_lock;
> +
> + video_set_drvdata(vdev, video);
> + rc = video_register_device(vdev, VFL_TYPE_GRABBER, 0);
> + if (rc) {
> + vb2_queue_release(vbq);
> + v4l2_ctrl_handler_free(&video->ctrl_handler);
> + v4l2_device_unregister(v4l2_dev);
> +
> + dev_err(video->dev, "Failed to register video device\n");
> + return rc;
> + }
> +
> + return 0;
> +}
> +
> +static int aspeed_video_init(struct aspeed_video *video)
> +{
> + int irq;
> + int rc;
> + struct device *dev = video->dev;
> +
> + irq = irq_of_parse_and_map(dev->of_node, 0);
> + if (!irq) {
> + dev_err(dev, "Unable to find IRQ\n");
> + return -ENODEV;
> + }
> +
> + rc = devm_request_irq(dev, irq, aspeed_video_irq, IRQF_SHARED,
> + DEVICE_NAME, video);
> + if (rc < 0) {
> + dev_err(dev, "Unable to request IRQ %d\n", irq);
> + return rc;
> + }
> +
> + video->eclk = devm_clk_get(dev, "eclk");
> + if (IS_ERR(video->eclk)) {
> + dev_err(dev, "Unable to get ECLK\n");
> + return PTR_ERR(video->eclk);
> + }
> +
> + video->vclk = devm_clk_get(dev, "vclk");
> + if (IS_ERR(video->vclk)) {
> + dev_err(dev, "Unable to get VCLK\n");
> + return PTR_ERR(video->vclk);
> + }
> +
> + video->rst = devm_reset_control_get_exclusive(dev, NULL);
> + if (IS_ERR(video->rst)) {
> + dev_err(dev, "Unable to get VE reset\n");
> + return PTR_ERR(video->rst);
> + }
> +
> + rc = of_reserved_mem_device_init(dev);
> + if (rc) {
> + dev_err(dev, "Unable to reserve memory\n");
> + return rc;
> + }
> +
> + rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
> + if (rc) {
> + dev_err(dev, "Failed to set DMA mask\n");
> + of_reserved_mem_device_release(dev);
> + return rc;
> + }
> +
> + if (!aspeed_video_alloc_buf(video, &video->jpeg,
> + VE_JPEG_HEADER_SIZE)) {
> + dev_err(dev, "Failed to allocate DMA for JPEG header\n");
> + of_reserved_mem_device_release(dev);
> + return rc;
> + }
> +
> + aspeed_video_init_jpeg_table(video->jpeg.virt, video->yuv420);
> +
> + return 0;
> +}
> +
> +static int aspeed_video_probe(struct platform_device *pdev)
> +{
> + int rc;
> + struct resource *res;
> + struct aspeed_video *video = kzalloc(sizeof(*video), GFP_KERNEL);
> +
> + if (!video)
> + return -ENOMEM;
> +
> + video->frame_rate = 30;
> + video->dev = &pdev->dev;
> + mutex_init(&video->video_lock);
> + init_waitqueue_head(&video->wait);
> + INIT_DELAYED_WORK(&video->res_work, aspeed_video_resolution_work);
> + INIT_LIST_HEAD(&video->buffers);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + video->base = devm_ioremap_resource(video->dev, res);
> +
> + if (IS_ERR(video->base))
> + return PTR_ERR(video->base);
> +
> + rc = aspeed_video_init(video);
> + if (rc)
> + return rc;
> +
> + rc = aspeed_video_setup_video(video);
> + if (rc)
> + return rc;
> +
> + return 0;
> +}
> +
> +static int aspeed_video_remove(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct v4l2_device *v4l2_dev = dev_get_drvdata(dev);
> + struct aspeed_video *video = to_aspeed_video(v4l2_dev);
> +
> + video_unregister_device(&video->vdev);
> +
> + vb2_queue_release(&video->queue);
> +
> + v4l2_ctrl_handler_free(&video->ctrl_handler);
> +
> + v4l2_device_unregister(v4l2_dev);
> +
> + dma_free_coherent(video->dev, VE_JPEG_HEADER_SIZE, video->jpeg.virt,
> + video->jpeg.dma);
> +
> + of_reserved_mem_device_release(dev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id aspeed_video_of_match[] = {
> + { .compatible = "aspeed,ast2400-video-engine" },
> + { .compatible = "aspeed,ast2500-video-engine" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, aspeed_video_of_match);
> +
> +static struct platform_driver aspeed_video_driver = {
> + .driver = {
> + .name = DEVICE_NAME,
> + .of_match_table = aspeed_video_of_match,
> + },
> + .probe = aspeed_video_probe,
> + .remove = aspeed_video_remove,
> +};
> +
> +module_platform_driver(aspeed_video_driver);
> +
> +MODULE_DESCRIPTION("ASPEED Video Engine Driver");
> +MODULE_AUTHOR("Eddie James");
> +MODULE_LICENSE("GPL v2");
>
Regards,
Hans
More information about the Linux-aspeed
mailing list