[PATCH v2 1/2] ARM: dts: Add Facebook BMC flash layout

Andrew Jeffery andrew at aj.id.au
Thu Nov 8 11:02:00 AEDT 2018


Hi Tao,

On Tue, 6 Nov 2018, at 14:58, Tao Ren wrote:
> This is the layout used by Facebook BMC systems. It describes the fixed
> flash layout of a 32MB mtd device.
> 
> Signed-off-by: Tao Ren <taoren at fb.com>
> ---
>  Changes since v1:
>   - adding facebook copyright.
> 
>  .../boot/dts/facebook-bmc-flash-layout.dtsi   | 33 +++++++++++++++++++
>  1 file changed, 33 insertions(+)
>  create mode 100644 arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi
> 
> diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi b/arch/
> arm/boot/dts/facebook-bmc-flash-layout.dtsi
> new file mode 100644
> index 000000000000..94039d7b7de5
> --- /dev/null
> +++ b/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi
> @@ -0,0 +1,33 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright (c) 2018 Facebook Inc.
> +
> +partitions {
> +	compatible = "fixed-partitions";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	u-boot at 0 {
> +		reg = <0x0 0x60000>;
> +		label = "u-boot";
> +	};
> +
> +	u-boot-env at 60000 {
> +		reg = <0x60000 0x20000>;
> +		label = "env";
> +	};
> +
> +	fit at 80000 {
> +		reg = <0x80000 0x1b80000>;
> +		label = "fit";
> +	};
> +
> +	data0 at 1c00000 {
> +		reg = <0x1c00000 0x400000>;
> +		label = "data0";
> +	};
> +
> +	flash0 at 0 {
> +		reg = <0x0 0x2000000>;
> +		label = "flash0";
> +	};

Is this necessary? Isn't the same thing achieved with the /dev/mtd0 device?

Cheers,

Andrew

> +};
> -- 
> 2.17.1
> 


More information about the Linux-aspeed mailing list