[PATCH] hwmon: (aspeed-pwm-tacho) Use 24MHz clock

[Guenter Roeck]

On 05/08/2018 02:39 AM, Lei YU wrote:
> The clock source for aspeed pwm is set to 24MHz, so use the hard-coded
> clock frequency instead of the one in device tree.
> 
> Otherwise, in case of the clock specified in device tree is not 24MHz,
> the fan speed will be incorrect.
> 
> Signed-off-by: Lei YU <mine260309 at gmail.com>
> ---
>   drivers/hwmon/aspeed-pwm-tacho.c | 7 ++-----
>   1 file changed, 2 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c
> index 693a3d5..e83b8df 100644
> --- a/drivers/hwmon/aspeed-pwm-tacho.c
> +++ b/drivers/hwmon/aspeed-pwm-tacho.c
> @@ -922,7 +922,6 @@ static int aspeed_pwm_tacho_probe(struct platform_device *pdev)
>   	void __iomem *regs;
>   	struct resource *res;
>   	struct device *hwmon;
> -	struct clk *clk;
>   	int ret;
>   
>   	np = dev->of_node;
> @@ -956,12 +955,10 @@ static int aspeed_pwm_tacho_probe(struct platform_device *pdev)
>   	regmap_write(priv->regmap, ASPEED_PTCR_TACH_SOURCE, 0);
>   	regmap_write(priv->regmap, ASPEED_PTCR_TACH_SOURCE_EXT, 0);
>   
> -	clk = devm_clk_get(dev, NULL);
> -	if (IS_ERR(clk))
> -		return -ENODEV;
> -	priv->clk_freq = clk_get_rate(clk);
>   	aspeed_set_clock_enable(priv->regmap, true);
> +	// The clock source is set to 24MHz

No mixed C/C++ comments in hwmon drivers.

>   	aspeed_set_clock_source(priv->regmap, 0);
> +	priv->clk_freq = 24000000;
>   

Are you saying that clk_get_rate() is wrong ? Anyway, if the DT is bad, it should be fixed.
I am not a friend of hacking drivers to fix up bad DTs, and much less so without explanation.
Plus, how do we know that the next chip supported by the driver doesn't have a 32MHz clock ?
Really, please fix the DT.

Guenter

>   	aspeed_create_type(priv);
>   
>