[PATCH 1/2 v2] ARM: dts: Add Aspeed SoC USB controllers to device-tree
joel at jms.id.au
Wed Mar 28 11:32:18 AEDT 2018
On 16 January 2018 at 02:29, Andrew Jeffery <andrew at aj.id.au> wrote:
> On Fri, 2018-01-12 at 17:21 +1100, Benjamin Herrenschmidt wrote:
>> This adds the USB controllers to the DT template of the
>> AST24xx and AST25xx SoCs.
>> This patch doesn't enable them by default on any board specific
>> .dts yet. This will be done when we have the necessary clock/reset
>> and pinmux support. In the meantime though, this will work if
>> u-boot configures things properly.
>> For the AST2400 I only added pinmux definition for port 1
>> which is dual USB1/USB2. There are additional USB1 only ports
>> that might require more work but I don't have HW to test at
>> hand so I'm leaving that to whoever cares.
>> Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
>> v2: Previous patch was missing actually adding the nodes
>> (which was an old patch in my tree I had forgotten to
>> arch/arm/boot/dts/aspeed-g4.dtsi | 27 +++++++++++++++++++++++++++
>> arch/arm/boot/dts/aspeed-g5.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
>> 2 files changed, 67 insertions(+)
> Reviewed-by: Andrew Jeffery <andrew at aj.id.au>
This one also slipped through the cracks. I have applied it to the
aspeed tree with Andrew's review.
More information about the Linux-aspeed