[PATCH 06/14] fsi: master-gpio: Add more tracepoints

Joel Stanley joel at jms.id.au
Thu Jun 28 14:11:34 AEST 2018


On 27 June 2018 at 08:55, Benjamin Herrenschmidt
<benh at kernel.crashing.org> wrote:
> This adds a few more tracepoints that have proven useful when
> debugging issues with the FSI bus.
>
> Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>

Reviewed-by: Joel Stanley <joel at jms.id.au>

> ---
>  drivers/fsi/fsi-master-gpio.c          | 16 ++++---
>  include/trace/events/fsi_master_gpio.h | 59 ++++++++++++++++++++++++++
>  2 files changed, 69 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/fsi/fsi-master-gpio.c b/drivers/fsi/fsi-master-gpio.c
> index 48e0e65b2982..a00a85aa6d56 100644
> --- a/drivers/fsi/fsi-master-gpio.c
> +++ b/drivers/fsi/fsi-master-gpio.c
> @@ -130,10 +130,17 @@ static void set_sda_output(struct fsi_master_gpio *master, int value)
>
>  static void clock_zeros(struct fsi_master_gpio *master, int count)
>  {
> +       trace_fsi_master_gpio_clock_zeros(master, count);
>         set_sda_output(master, 1);
>         clock_toggle(master, count);
>  }
>
> +static void echo_delay(struct fsi_master_gpio *master)
> +{
> +       clock_zeros(master, master->t_echo_delay);
> +}

This doesn't look like it belongs in this patch.

You've just moved it up. Not worth a re-spin.

> +
> +
>  static void serial_in(struct fsi_master_gpio *master, struct fsi_gpio_msg *msg,
>                         uint8_t num_bits)
>  {
> @@ -279,16 +286,19 @@ static void build_ar_command(struct fsi_master_gpio *master,
>                 addr_bits = 2;
>                 opcode_bits = 2;
>                 opcode = FSI_GPIO_CMD_SAME_AR;
> +               trace_fsi_master_gpio_cmd_same_addr(master);
>
>         } else if (check_relative_address(master, id, addr, &rel_addr)) {
>                 /* 8 bits plus sign */
>                 addr_bits = 9;
>                 addr = rel_addr;
>                 opcode = FSI_GPIO_CMD_REL_AR;
> +               trace_fsi_master_gpio_cmd_rel_addr(master, rel_addr);
>
>         } else {
>                 addr_bits = 21;
>                 opcode = FSI_GPIO_CMD_ABS_AR;
> +               trace_fsi_master_gpio_cmd_abs_addr(master, addr);
>         }
>
>         /*
> @@ -337,12 +347,6 @@ static void build_epoll_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
>         msg_push_crc(cmd);
>  }
>
> -static void echo_delay(struct fsi_master_gpio *master)
> -{
> -       set_sda_output(master, 1);
> -       clock_toggle(master, master->t_echo_delay);
> -}
> -
>  static void build_term_command(struct fsi_gpio_msg *cmd, uint8_t slave_id)
>  {
>         cmd->bits = 0;


More information about the Linux-aspeed mailing list